Abstract:It is relatively difficult to monitor the deformation of slope body in model test. To solve this problem, the optical fiber sensing technique is applied to slope model test. By constructing physical model for slope under artificial rainfall,the deformation in slope body can be monitored by optical fiber sensing technology of Brillouin optical time domain reflectometer(BOTDR);and the deformation on slope surface can be monitored by fiber Bragg grating(FBG). Regarding the fixed point on the model box as the reference point,the variations in slope body can be monitored by the optical fiber preburied in the different locations of slope;and the deformation on slope surface can be achieved by the FBG sensor set on the slope surface. According to the recorded data of deformations before,during and after rainfalls,it can be found that the deformation of slope is not obvious in initial period of rainfall,but as the time goes on,there is a sudden growth of the deformation in the slope body and surface. The part of the slope closer to the surface has the larger deformation,but the part at the bottom of the slope has the least deformation. The overall law is that the influence of rainfall on slope body diminishes gradually with increase of depth of slope body. That can explain why the homogeneous soil-slope′s failure induced by rainfall is easy to occur in shallow strata. In the slope surface,the maximum deformation appears in the trailing edge of slope,and the minimum one appears in the front edge. After the rainfall,a part of the deformations in the slope reduces to a lower value. The experimental result has proven that the optical fiber sensing technologies of BOTDR and FBG have many advantages in the monitoring of geotechnical engineering,and they can offer practical references and prospects on application.

Application of CCD Micro-Deformation Monitoring Technology to Slope Remote Monitoring

APPLICATION OF LASER RANGING TECHOLOGY IN SLOPE ROMOTE MONITORING AND ERROR CORRECTION

A Case Study on the Application of 3D Scanning Technology in Deformation Monitoring of Slope Stabilization Structure

Application of Surface Deformation Monitoring of Slope Using BOTDR Technology

High precision slope deformation monitoring by UAV with industrial photogrammetry

Fiber optic based monitoring technologies of slope engineering

Application of Slope Safety Automatic Monitoring Technology in the Project of Road No.1 in Republic of Congo

Monitoring of soil nailed slopes and dams using innovative technologies

Real Time Measurement of Subgrade Settlement in High Speed Railways with a Resolution of 0.25 mm Using a Laser Imaging Method

Multi-Source Monitoring and Numerical Simulation Deformation on Highway Steep Slopes under Rainfall Effects

Stability Evaluation of Highway Cut Slope Based on Remote Monitoring of Axial Force of Anchor and Displacement

APPLICATION OF OPTICAL FIBER SENSING TECHNOLOGY TO SLOPE MODEL TEST

Slope surface displacement monitoring based on a photogrammetric system

CURRENT STATUS AND NEW PROGRESS ON SLOPE DEFORMATION MONITORING TECHNOLOGIES

Slope monitoring optimization considering three-dimensional deformation and failure characteristics using the strength reduction method: A case study

Accuracy Improvement of Binocular Vision Measurement System for Slope Deformation Monitoring

Methods and research for deformation monitoring of earth and rock dams based on close-range photogrammetry

High Slope Stability Remote Real-time Monitoring System Used in Subtropical Monsoon Climate Zone in Western Guangdong

STUDY ON DISTRIBUTED OPTICAL FIBER SENSOR-BASED MONITORING FOR SLOPE ENGINEERING

Application of Monitoring the Subgrade with the Distributed Brillouin Optical Fiber Sensing Technique in the Yi-Chang Expressway

Monitoring and stability analysis of roadbed & high slope prior to highway construction