Abstract:The Fukushima Daiichi Nuclear Power Plant accident in Japan was one of the severest accidents in history of nuclear power plants. This accident changed the prospect of the Nuclear Engineers all around the globe, regarding safety enhancement of nuclear reactors. Since then many aspects of nuclear reactors regarding the improvements of safety features are under investigation and R&D efforts are underway around the world. Use of innovative fuels in present as well as future reactor designs is one of the major potential areas of these ongoing efforts. Fully Ceramic Micro-Encapsulated (FCM) fuel originally developed for use in high temperature gas cooled nuclear reactors, has proven worth for operating in high temperature environment with high burn-up. Due to its additional fission product barrier in the form of strong SiC layer, it is worth using for application as PWR fuel, thus providing potential benefits related to safety and operational aspects of power plant. However, use of FCM fuel in a PWR also has some operational constraints such as the moderator temperature coefficient (MTC) of reactivity has less negative value and even becomes positive when higher concentration of soluble boron is used for the reactivity control. Thus, use of burnable poison material becomes more important to control the access reactivity throughout the cycle length in such a way the quantity of soluble boron to be used is much lower to prevent the positive MTC value or even soluble boron free operation is possible. In present studies a new candidate designs of PWR fuel assembly of 12×12 square array configuration has been used to study the BP material impact on cycle length. Monte Carlo code MVP-BURN is utilized for the analysis to accurately model the double heterogeneity arising due to TRISO type fuel. Two standard materials i.e. Erbia and Gadolinia are used and different configuration including mixing of BP in matrix material, fuel kernel and in QUADRISO form are analyzed and compared with each other. Impact of the residual poison are also analyzed and additional enrichment required to overcome the impact of residual BP material reactivity are calculated. Different configurations support different BP materials. However, it has been found that with an appropriate combination of both materials and configuration, it is possible to minimize the use of soluble boron. Finally, the recommended assembly configuration is analyzed for MTC value during the entire cycle length, showing sustainability of negative values of MTC for the region of interest. With this kind of arrangements, it is possible to use FCM type fuel for present as well as future generations of the PWRs.

Utilising 241Am as burnable poison in proliferation resistant PWR

Potentials in "nonproliferating" nuclear fuel: Design and implications on a PWR fuel cycle

Particle emission from irradiated VVER-1200 fuel with Am burnable absorber

BURNABLE POISONS ALTERNATIVE CONFIGURATIONS IN AT-FCM PWR FUEL ASSEMBLY

Production of Pa-U Fuel with Proliferation Resistance by 14 MeV Neutron for Long-life Core

Performance analysis of an advanced polymeric burnable poison for PWR fuel assembly

Innovative burnable absorbers: Assessing PaO2 and NpO2 coatings for improved safety in (Th-233U-235U)O2 fuel assemblies

Utilizing even Plutonium Isotopes as burnable absorbers for controlling the reactivity and power distribution in Pressurized Water Reactors

Burnable Poison Selection and Neutronics Analysis of Plate Fuel Assemblies

Physical aspects for involvement of thermonuclear reactors into nuclear power systems

Review and comparison of neutronic parameters of VVER-1200 and PWR fuel assemblies with different burnable absorbers

Burnable Poison Selection of Plate Fuel Assembly for Long-life Pressurized Water Reactor

Enhancing fuel breed-burn performance in a sodium-cooled fast reactor using a novel reactivity control method

Improving the reactor safety aspects by the implementation of (Th-U 233 -Pu) fuel in a PWR assembly

Investigating the possibility of using a mixture of thorium with different fissile materials as a fuel in TRISO particles for the PBMR-400 reactor

Selection of Burnable Poison in Plate Fuel Assembly for Small Modular Marine Reactors

Neutronic Study of Burnable Poison Materials and Their Alternative Configurations in Fully Ceramic Microencapsulated Loaded Pressurized Water Reactor Fuel Assembly

Possibility assessment for production of non-traditional nuclear fuel in thorium blanket of hybrid thermonuclear reactor

Transmutation of Minor Actinides and Power Flattening in PWR MOX Fuel

Burnable Poison Design for Supercritical Water Cooled Reactor with Annular Fuel

Reactivity Control Optimization of Boron-Free Small Modular Pressurized Water Reactor with Helical-Cruciform Metallic Fuel