Abstract:The addition of magnesium to Aluminum alloys has become increasingly popular due to their lightweight, high strength, and corrosion resistance properties. Our research on high-content Mg doped 90, Al-10 wt% Mg alloy has shown that coating it with electroless Ni-P and codepositing nano-Al2O3 (0, 2.5, 5 and 7.5 wt%) can significantly improve its mechanical properties, resistance to wear & tear, and even corrosion resistance. The electroless Ni-P-5 wt% Al2O3 composite displayed a wear rate of 0.65×10−3 g/m at 12 N, a microhardness value of 598 HV, and remarkable thermal shock resistance. A strong and uniform bond was formed between the coating and substrate, and no delamination or cracking was observed. Polarisation curves in 3.5 wt% NaCl solution showed that the corrosion potential of the 90, Al-10 wt% Mg alloy was higher than that of Ni-P and Ni-P-nano Al2O3 composites, indicating that the incorporation of nano-Al2O3 into the Ni-P electroless bath provides superior corrosion protection. This cost-effective and simple approach makes the Ni-P-5 wt% Al2O3 nanocomposite coating an ideal choice for shielding Al-Mg alloys from corrosion. HIGHLIGHTS We examine the magnesium content in Al-Mg alloy Electroless Ni-P-5 wt% Al2O3 coating could improve the anti-corrosion properties of Al-Mg alloy The thermal shock test showed that the alloy had good thermal stability Microhardness and wear resistance increase with the addition of nano Al2O3 particles The electroless Ni-P-5 wt% Al2O3 composite shows a wear rate of 0.65×10−3 g/m at 12 N GRAPHICAL ABSTRACT

An eco-friendly one-step pretreatment method for the synthesis of electroless coatings on magnesium alloy

Environmentally friendly and facile Mg(OH) 2 film for electroless nickel plating on magnesium alloy for enhanced galvanic corrosion inhibition

Pretreatment-free Ni−P plating on magnesium alloy at low temperatures

Electroless Ni–P deposition plus zinc phosphate coating on AZ91D magnesium alloy

Electrodeposition of High Corrosion Resistance Cu/Ni–P Coating on AZ91D Magnesium Alloy

Corrosion resistance of AZ91D magnesium alloy with electroless plating pretreatment and Ni–TiO2 composite coating

Optimization of the Corrosion Resistance of Electroless Ni–W–P Coatings on Magnesium Alloys by the Response Surface Methodology

Novel Green and Ecofriendly Route for Fabricating a Robust Corrosion Protection Coating on AZ91D Magnesium Alloy

One-step Pickling-activation Pretreatment Process of Magnesium Alloy

Electroplating and Physicochemical Properties of Zinc–Nickel Alloy Coatings from Ammonium Oxalate Electrolytes

Direct electroless Ni-P deposition on AM50 magnesium alloy from sulfate bath

Effect of Mg on Al-Mg Alloy and Electroless Ni-P Codeposition of nano-Al2O3: Mechanical, Wear, and Corrosion Resistance Properties

Fabrication of Electroactive Poly(γ‐glutamic Acid) Coating for Improving Corrosion Resistance and Cytocompatibility of Magnesium Alloy

Facile fabrication of robust superhydrophobic coating for enhanced corrosion protection on AZ91 magnesium alloy by electroless Ni-B/GO plating

Chemically depleting the noble impurities from AZ91-T4 magnesium alloy: A new and efficient pretreatment method to improve the corrosion resistance of phosphate conversion coatings

Effect of Zinc Immersion Pretreatment on the Electro-Deposition of Ni Onto AZ91D Magnesium Alloy

A Green Conversion Coating on a Magnesium Alloy for Corrosion Protection

Microstructure and Electrochemistry Behavior of Ni-Cu-P Ternary Nickel-Based Amorphous Coating

High Corrosion-Resistance Nanocrystalline Ni Coating on AZ91D Magnesium Alloy

Eco-friendly, cost-effective electroless Ag plating based on a novel Ni–P activation process on magnesium titanate ceramic

Electroplated super-hydrophobic Zn-Fe coating for corrosion protection on magnesium alloy