Abstract:Synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films. Polyvinyl alcohol (PVA) is a widely used polymer that is biocompatible, nontoxic, and water‐soluble due to the presence of hydroxyl groups in its domain. This study aims to investigate the effects of fumaric acid (FA) cross‐linking and thermal cross‐linking (TC) on the PVA's mechanical and thermal properties. When the FA is mixed with PVA, it was found in the chemical reaction that the OH groups of PVA are condensing with the carboxylic acid units of FA to yield new ester linkages and water as a by‐product, which further results in the reduction of the water absorption capacity. Quantitatively, the addition of 8 (wt. /wt. %) FA resulted in a minimum of 65% water absorption rate, as compared with 117% for pure PVA. The mechanical and thermal properties of PVA also enhanced with the addition of 2% to 8% FA by weight. For the TC case, the % increase in ultimate tensile strength was 30.9% and 42.5% with and without TC, respectively. As the wt. % of FA increased from 2 to 10%, the % elongation value decreased for both with and without TC films relative to pure PVA. The thermogravimetric analysis revealed the change in degradation temperature of FA‐PVA blended film in comparison with pure PVA. Dynamic mechanical analysis was utilized to analyze the viscoelastic nature and temperature variation at the glass transition temperature. The current fabricated film is a potential candidate for the food packaging films application; moreover, the results reported in this investigation will accelerate the industrial applications of biodegradable PVA. Highlights Increasing the weight percentage of fumaric acid leads to an enhancement in mechanical and thermal properties of the film. Esterification is the usual reaction between fumaric acid and polyvinyl alcohol (PVA), in which ester linkages are formed when the carboxyl groups (‐COOH) of fumaric acid and the hydroxyl groups (‐OH) of PVA combine. Water absorption characteristics of the film reduces as the wt. % of fumaric acid increases. Thermal cross‐linking of the film leads to further improvements in mechanical and thermal properties. The overall effect of increasing the wt. % of fumaric acid is negative on the glass transition temperature of the film. The developed film is a potential candidate for the food packaging films application.

Thermoplastic film from natural fibers and fatty acids by a single esterification reaction

Biobased poly(butylene 2,5-furandicarboxylate) and poly(butylene adipate-co-butylene 2,5-furandicarboxylate)s: From synthesis using highly purified 2,5-furandicarboxylic acid to thermo-mechanical properties

Wood Esterification by Fatty Acids Using Trifluoroacetic Anhydride as an Impelling Agent and Its Application for the Synthesis of a New Bioplastic

Tensile and Surface Wettability Properties of the Solvent Cast Cellulose Fatty Acid Ester Films

Plasticized Cellulosic Films by Partial Esterification and Welding in Low-Concentration Ionic Liquid Electrolyte

Insight into the Feasibility of Fatty Acyl Chlorides with 10-18 Carbons for the Ball-Milling Synthesis of Thermoplastic Cellulose Esters

Hydrophobic and Melt Processable Starch-Laurate Esters: Synthesis, Structure-Property Correlations

The impact of surface treatment on the mechanical properties of flax based fiber composite

Barrier, Mechanical, Thermal, and Rheological Properties of Plasticized Biopolymeric Films Manufactured by Co-Extrusion

Synthesis by Melt-Polymerization of a Novel Series of Bio-Based and Biodegradable Thiophene-Containing Copolyesters with Promising Gas Barrier and High Thermomechanical Properties

Thermoplastic starch/polyester films: effects of extrusion process and poly (lactic acid) addition

Synthesis of esters derived from 2,5-furandicarboxylic acid and study of its plasticizing effects on poly(lactic acid)

The Influence of Chemically Treated Hemp Fibre on the Mechanical Behavior and Thermal Properties of Polylactic Acid Made with FDM

Efficient chemical synthesis of new thermoplastic fluorinated aromatic polyester

Production of Thermoplastic Starch-Aloe Vera Gel Film Embedded with Polyethylene for Improved Tensile Strength and Water Absorption

Synthesis of high-T fluorinated polyesters based on 2,5-furandicarboxylic acid

Adhesion characteristics of plasma-treated flax fabrics and elastoplastic properties of their biocomposites

New Bio-Based Copolyesters Derived from Novel Cyclic Diol 2,5-Tetrahydrofurandimethanol, 2,5-Furardicarboxylic Acid and 1,3-Propanediol: Synthesis, Thermal Behavior and Rheological Properties

A Series of Furan‐aromatic Polyesters Synthesized Via Direct Esterification Method Based on Renewable Resources

Experimental synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films: Implications as a sustainable matrix for composites

Synthesis and Properties of a Bio-based Plasticizer Derived from Fatty Acid Methyl Ester of Erucic Acid