Abstract:Characterization of the damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates by a combined experimental and finite element approach. In this paper, the mechanical properties, damage modes, and bolt load distribution of the bonded‐bolted hybrid three‐bolt joint were investigated by a combination of experiments and numerical simulations. Acoustic emission (AE) was used to monitor the tensile process of the connection in real time, and the K‐means clustering algorithm was used to realize the cluster analysis of the damage modes. A numerical simulation model of the tensile process of the joint was established using ABAQUS simulation software. The progressive damage evolution of composite laminates, and adhesive layer was characterized by using the VUMAT subroutine, the B‐K failure criterion, and cohesive element with zero thickness, respectively. The results show that four main damage modes occur in composite laminates during tension: matrix cracking, delamination, fiber pull‐out, and fiber breakage, with corresponding peak frequency ranges of (0–80 kHz), (80–210 kHz), (210–330 kHz), and (330–375 kHz), respectively. The adhesive layer between the laminates mainly exhibits peeling failure because of the secondary bending effect. In the load‐bearing process, the adhesive layer was loaded first and failed, and the bolt loading was delayed. Meanwhile, the results of bolt load distribution showed that the bolts and the adhesive layer at both ends carried greater loads. Highlights Damage modes and damage evolution of the bonded‐bolted hybrid joint in tension were analyzed by combining acoustic emission technology and numerical simulation. The simulation of delamination damage in composite laminates was carried out by inserting zero‐thickness cohesive elements into the laminates, and the delamination damage between the carbon fiber layup and the adjacent glass fiber layup was analyzed. The effect of the inclusion of the adhesive layer on the mechanical properties of the joint and the distribution of the bolt load was analyzed.

The evolution mechanisms of bearing-tension-shear failure modes of FML joints under in-plane dynamic load

Micro Failure Analysis of Fiber Metal Laminates

Residual tension behavior and damage evolution mechanisms of fiber metal laminates with various low-velocity impacted damage

Characterization of damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates

Effect of Hole Arrangement on Failure Mechanism of Multiple-Hole Fiber Metal Laminate under On-Axis and Off-Axis Loading

Numerical simulation of pin-loaded joints of fiber metal laminate

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Mechanistic Study of Failure in CFRP Hybrid Bonded–Bolted Interference Connection Structures under Tensile Loading

Investigation on the Progressive Damage and Bearing Failure Behavior of Composite Laminated Bolted Joints under Tension

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Study of Low-Velocity Impact Behavior of Hybrid Fiber-Reinforced Metal Laminates

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Experimental Investigation and Numerical Simulation of Bonded, Bolted, and Hybrid Joints in CFRP Laminates Under Tensile Loading

Fatigue failure simulation of a double-lap composites-metal bolted joint structure

Numerical and experimental investigation on the load‐bearing performance of plain‐woven composites hybrid bonded‐bolted joints

Characterizing and predicting the tensile mechanical behavior and failure mechanisms of notched FMLs—Combined with DIC and numerical techniques

Tensile and flexural mechanical attributes of hybrid carbon/basalt fiber metal laminates under various hybridization and stacking sequences

Mechanical Properties and Failure Characteristics of Hybrid Bonded-Bolted GFRP/Al Joints under Dynamic Tensile load

Experimental investigations of bolted, adhesively bonded and hybrid bolted/bonded single-lap joints in composite laminates

Numerical and experimental investigation on the oblique successive impact behavior and accumulated damage characteristics of fiber metal laminates

Experimental and Finite Element Research on the Failure Mechanism of C/C Composite Joint Structures under Out-of-Plane Loading