Abstract:A multiscale scheme on the bending performance of injection molded products. The characterization of the flexural performances of short glass fiber reinforced polyether‐ether‐ketone (SGFR‐PEEK) composites fabricated by injection molding is a crucial and challenging task due to the process‐induced fiber orientation at different locations, resulting layered shell‐core‐shell microstructures and exhibiting large variations in mechanical performances. This article proposes a method for predicting the bending performance of SGFR‐PEEK and indicates the influence of fiber orientation on its bending behavior. This article reports a new scheme that combines multiscale homogenization with periodic microstructures and presents an experimental investigation of the flexural properties of SGFR‐PEEK composites. The distributions of fiber orientation through the thickness extracted from the micro‐computed tomography (μCT) were analyzed and reproduced with a layered skin‐shell‐core structure along the thickness at meso‐scale finite element model within representative volume elements (RVEs) of the macroscopic composites. Then, the effective properties of the RVEs were predicted using the homogenization method with the periodic boundary condition. The elastic modulus of skin‐shell‐core layers in the direction of flow are 4260.51, 4541.27, 4628.52, and 4630.84 MPa, respectively. The classical laminate theory (CLT) and the second homogenization implementation were then utilized in conjunction with the obtained mechanical properties of RVEs to predict the effective macrostructural behavior. The flexural modulus of the composite material was determined to be 5448.7 MPa through a three‐point bending test. The results obtained through lamination plate reinforcement theory and finite element simulation were 5887.4 and 5785.9 MPa, respectively, showing good agreement with the experimental findings. It is shown that the proposed multiscale scheme yields satisfactory agreement with experimental measurements. In addition, the effect of layered skin‐shell‐core microstructures on the flexural behavior was discussed. Highlights RVEs of layered shell‐core‐shell microstructures were generated with specified fiber orientations. The homogenization scheme with the periodic boundary condition was adopted to accurately predict each layer mechanical properties. The proposed multiscale scheme was compared with experimental results and yielded satisfactory predictions. The effect of layered skin‐shell‐core microstructures on the flexural behavior was thoroughly studied by the multiscale analytical approach.

A stochastic modelling framework for predicting flexural properties of ultra-thin randomly oriented strands

Machine Learning and Materials Informatics Approaches for Predicting Transverse Mechanical Properties of Unidirectional CFRP Composites with Microvoids

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Failure mode analysis and prediction model of additively manufactured continuous carbon fiber‐reinforced polylactic acid

Characterisation and Mathematical Modelling of Nonlinear Mechanical Behaviour of 3D Printed Short Carbon Fibre Reinforced Composites

Multiscale simulation of hygrothermal stress and mechanical properties degradation of carbon fiber reinforced polymers laminates

Bimodulus constitutive models and the simulation on bending properties of woven carbon fibre-reinforced composites

Structure Design on Thermoplastic Composites Considering Forming Effects

Flexural strength prediction model based on online measured temperature of fusion deposited CF/PEEK composites and accommodation mechanism

An accurate forming model for capturing the nonlinear material behaviour of multilayered binder-stabilised fabrics and predicting fibre wrinkling

Tensile Performance Prediction of CFRPs with Voids Using Multiscale Analysis and Neural Networks

Tensile and Compression Strength Prediction and Validation in 3D-Printed Short-Fiber-Reinforced Polymers

An approach to predict the mechanical properties of CFRP based on cross-scale simulation

A New Stress-Based Formulation for Modeling Notched Fiber-Reinforced Laminates

Ultimate Strength Prediction of Two-Dimensional Tri-Axial Braided Composites Based on an Analytical Laminate Model

Progressive failure prediction of three-dimensional woven composites using a generic multi-scale analytical model

Computational micromechanics model based failure criteria for chopped carbon fiber sheet molding compound composites

A multiscale scheme for homogenization to characterize the flexural performances of injection molded short glass fiber reinforced polyether ether ketone composites

Failure Modes and Strength Prediction of Thin Ply CFRP Angle-Ply Laminates

3D FEA Modelling of Laminated Composites in Bending and Their Failure Mechanisms