Abstract:In the present seismic design philosophy, the structures are designed to remain within the specified displacement limits for multiple earthquake hazard levels expected during their design life. Accordingly, the estimation of maximum inelastic displacement demand in a structure consistent with a given hazard level is of primary importance. Considering the complexity and inconvenience associated with the nonlinear response history analyses for a suite of hazard‐consistent ground motions, it is preferred to estimate the maximum inelastic displacement demand by using the scaling models available for the inelastic displacement ratio C in the single‐degree‐of‐freedom (SDOF) structures. In this study, a new scaling model is developed for the inelastic displacement ratio CR(T) spectrum for a given response reduction factor R in the case of 5%‐initial damping Bouc‐Wen‐Baber‐Noori (BWBN) oscillators with stiffness and strength degradations and pinching. This model is based on the observed similarities between the CR(T) spectrum and the reciprocal of given displacement response SD(T ) spectrum in most cases, and thus, this indirectly accounts for the effects of seismological and site parameters. A new strong‐motion duration definition is also proposed to identify shorter strong‐motion segments of comparable relevance, and on using this definition, it is shown that the dependence of the mean CR(T) spectrum on strong‐motion duration may be considered negligible. Accordingly, the regression parameters of the proposed scaling model for CR(T) spectrum are estimated as the exponential functions of only five governing BWBN parameters. The best‐fit estimates of the regression coefficients of the resulting prediction equations are obtained for three values of R. The residual error spectra are also modeled to estimate the CR(T) spectrum for a given confidence level. The proposed scaling model can be applied to a wide range of existing reinforced concrete (RC) structures with 5% initial damping by using the input of the design displacement spectrum and BWBN parameters.

Probabilistic inelastic displacement demand estimation for SDOF self-centering viscous systems subjected to near-fault forward-directivity ground motions

Inelastic Displacement Amplification Factor for Ductile Structures with Constant Strength Reduction Factor

Inelastic Yielding Strength Demand Coefficient Spectra

Strength reduction factor for inelastic-displacement estimation and design of self-centering viscous-hysteretic systems

Dynamic P-△ Effects on Seismic Force Modification Factors

Residual Displacement Responses of Structures Subjected to Near-Fault Pulse-Like Ground Motions

Analysis On Energy Demand For Inelastic Sdof Systems Under Near-Fault Impulsive Ground Motions

Estimation of inelastic displacement ratio spectrum for existing RC structures via displacement response spectrum

Probability-based analytical model for predicting the post-earthquake residual deformation of SDOF systems

Refined Probabilistic Seismic Demand Modeling of High-Speed Railway Bridge Under Near-Fault Hanging-Wall Effects and Velocity Pulse Effects by a Novel Ground Motion Selection Approach

Study on Inelastic Displacement Ratio Spectra for Near-Fault Pulse-Type Ground Motions

Constant Ductility Inelastic Displacement Ratios for the Design of Self-Centering Structures with Flag-Shaped Model Subjected to Pulse-Type Ground Motions

Residual displacement analysis and damage assessment of SDOF system

Estimation of Constant-Damage Residual Displacements in Terms of Maximum Inelastic Displacements for SDOF Structures

Quantification of seismic demands of damage-control tension-only concentrically braced steel beam-through frames (TCBSBFs) subjected to near-fault ground motions based on the energy factor

The normalized inelastic displacement spectra for seismic response estimation of a SDOF system with a generalized flag-shaped hysteretic model

Seismic residual deformation analysis of single degree of freedom system based on probability

Inelastic Displacement Ratios for Design of Structures with Constant Damage Performance

Performance-based-plastic-design of damage-control steel MRFs equipped with self-centring energy dissipation bays

Near-Fault Forward Directivity Effect on the Estimation of Ground Motion Amplification Factors

A New Energy-Based Ground Motion Selection and Modification Method Limiting the Dynamic Response Dispersion and Preserving the Median Demand