Abstract:This study aims to enhance CO2/CH4 separation using cellulose acetate and polyetherimide membranes filled with graphene (GR) and acid‐treated GR. The 0.1% acid‐treated GR/cellulose acetate (43 Barrers, 14.80 selectivity) and 0.5% GR/polyetherimide membranes (17.48 Barrers, 8.96 selectivity) have shown the best gas permeation results. Gas separation membranes are crucial for upgrading biogas by separating carbon dioxide (CO2) from biogas, thereby enhancing its calorific value and reducing greenhouse gas emissions. This study aims to improve CO2/CH4 separation using mixed‐matrix membranes (MMMs) by incorporating graphene (Gr) and acid‐treated graphene (AGr) fillers in a cellulose acetate (CA) polymer matrix. Similarly, polyetherimide (PEI) MMMs were also prepared with Gr and AGr fillers to draw a comparison. Various characterization techniques, including Fourier transform infrared spectroscopy, differential scanning calorimetry, field emission scanning electron microscopy, Raman spectroscopy, and X‐ray diffraction, were employed to investigate the structural and morphological properties of the membranes and fillers. Gas permeation tests using a model biogas mixture (40% CO2 and 60% CH4) revealed that the 0.1%AGr/CA membrane achieved the highest CO2 permeability of 43 Barrers, which is approximately 307% more than that of the pure CA membrane, and showed a CO2/CH4 selectivity of 14.80. The 0.5%Gr/PEI membrane demonstrated the best performance among PEI‐based MMMs, with a CO2 permeability of 17.48 Barrers and a CO2/CH4 selectivity of 8.96. These results indicate that the incorporation of Gr and AGr significantly enhances the gas separation performance over pure CA and PEI membranes. Highlights Graphene (G) and acid‐treated Gr‐based cellulose acetate (CA) and polyetherimide (PEI) mixed‐matrix membranes (MMMs) were fabricated. Model biogas was used for testing CO2 and CH4 gas permeation. The 0.1% AGr/CA MMM showed 307% higher CO2 permeability than pure CA. The 0.5% Gr/PEI MMM showed 435% higher CO2 permeabilit than pure PEI. Structural properties were confirmed by Fourier transform infrared spectroscopy, differential scanning calorimetry, field emission scanning electron microscopy, Raman, and X‐ray diffraction.

Enhancing the CO2/CH4 Separation Properties of Cellulose Acetate Membranes Using Polyethylene Glycol Methyl Ether Acrylate Radiation Grafting

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

A review on recent advances of cellulose acetate membranes for gas separation

Performance of Annealed Composite Cellulose Acetate/NaA Zeolite Membrane in Carbon dioxide/Methane Gas Separation

Cellulose Acetate–Ionic Liquid Blends as Potential Polymers for Efficient CO2 Separation Membranes

Investigation of mixed matrix membranes of graphene and acid‐treated graphene fillers in cellulose acetate and polyetherimide polymers for CO2 separation from biogas

Selective Permeation of CO2 Through Pore-Filled Polyacrylonitrile Membrane with Poly(ethylene Glycol)

Cellulose acetate based sustainable nanostructured membranes for environmental remediation

Selective Separation of Low Concentration CO2 Using Hydrogel Immobilized CA Enzyme Based Hollow Fiber Membrane Reactors

Study on the Performance of Cellulose Triacetate Hollow Fiber Mixed Matrix Membrane Incorporated with Amine-Functionalized NH2-MIL-125(Ti) for CO2 and CH4 Separation

Study of dual Filler Mixed Matrix Membranes with acid-functionalized MWCNTs and Metal-Organic Framework (UiO-66-NH2) in Cellulose Acetate for CO2 Separation

Nanostructured membrane material designed for carbon dioxide separation

Improving CO2 Permeation and Separation Performance of CO2-philic Polymer Membrane by Blending CO2 Absorbents

Dialdehyde Polyethylene Glycol Cross‐linked Poly(vinyl Alcohol) Membranes with Enhanced CO2/N2 Separation Performance

Suppression of Crystallization in Thin Films of Cellulose Diacetate and Its Effect on CO2/CH4 Separation Properties

CO 2 -separation performance of vinyl-addition polynorbornenes with ester functionalities

Study on the Preparation of Cellulose Acetate Separation Membrane and New Adjusting Method of Pore Size

Enhanced porous membrane fabrication using cellulose acetate and citric acid: Improved structural integrity, thermal stability, and gas permeability

High-performance CO2-selective Hybrid Membranes by Exploiting MOF-breathing Effects.

Improvement of CO2/CH4 separation characteristics of polyethersulfone by modifying with polydimethylsiloxane and nano-silica

CO2/CH4 Separation in Amino Acid Ionic Liquids, Polymerized Ionic Liquids, and Mixed Matrix Membranes