Abstract:Ventilated cavitating flows are investigated via direct numerical simulations, using a coupled level set and volume of fluid method to capture the interface between the air and water phases. A ventilated disk cavitator is used to create the cavity and is modelled by a sharp-interface immersed boundary method. The simulation data provide a comprehensive description of the two-phase flow and the air leakage and vortex shedding processes in the cavitating flow. The mean velocity of the air phase suggests the existence of three characteristic flow structures, namely the shear layer (SL), recirculating area (RA) and jet layer (JL). The turbulent kinetic energy (TKE) is concentrated in the JL in the closure region, and streamwise turbulent fluctuations dominate transverse fluctuations in both SL and JL. Budget analyses of the TKE show that the production term causes the TKE to increase in the SL due to the high velocity gradients, and decrease in the JL due to streamwise stretching effects. Air leakage and vortex shedding occur periodically in the closure region, and the one-to-one correspondence between these two processes is confirmed by the velocity and volume fluid spectra results, and the autocorrelation function of the air volume fraction. Moreover, the coherent flow structures are analysed using the spectral proper orthogonal decomposition method. We identify several fine coherent structures, including $SL_{KH}$ induced by the Kelvin–Helmholtz instability, $SL_{out}$ associated with large-scale vortex shedding, $SL_{in}$ associated with small-scale vortex shedding, and $SL_{r}$ associated with upstream turbulent convection. The present study complements previous research by providing detailed descriptions of the turbulent motions associated with the violent mixing of air and water, and the complex interactions between different characteristic structures in cavitating flows.

THE FLOW FIELD INSIDE A RANQUE-HILSCH VORTEX TUBE PART II: TURBULENCE MODELLING AND NUMERICAL SIMULATION

Experimental Study of Flow Crisis and Flow Structure in Ranque–Hilsch Vortex Tube

Numerical Computations of the Flow in A Finite Diverging Channel

Investigation Of The Unstable Flow Structure In A Rotating Cavity

Experimental investigation of transitional flow in a toroidal pipe

Experimental investigation of the flow characteristics within a vortex tube with different configurations

Numerical Investigations of Solid-Liquid Two-Phase Turbulent Flows through Francis Turbine

Numerical three-dimensional analysis of the mechanism of flow and heat transfer in a vortex tube

Simulations of the formation of an axisymmetric vortex ring

Numerical investigation on tornado-like flows and immersed bodies using vortex models

Modelling of turbulent flows in rotating systems with second-moment closures

Numerical analysis and an approach for optimization of the Ranque–Hilsch vortex tube for a compressible flow

Swirl flow stability: thermodynamic analysis and experiments

Ring Vortex Dynamics Following Jet Formation of a Bubble Expanding and Collapsing Close to a Flat Solid Boundary Visualized via Dye Advection in the Framework of OpenFOAM

Numerical Simulation Of Cavitating Turbulent Flow Through A Francis Turbine

Three-Dimensional Vortex Simulation Of Unsteady Flow In Hydraulic Turbines (Vol 69, 1679, 2012)

A numerical investigation on the vortex formation and flow separation of the oscillatory flow in jet pumps

Turbulence Resolving Flow Simulations of a Francis Turbine in Part Load using Highly Parallel CFD Simulations

Modelling and simulation of the dynamic flow behaviour in a bubble column

Assessment of Six Turbulence Models for Modeling and Predicting Narrow Passage Flows, Part1: Impingement Jets

Simulation-based Study of Low-Reynolds-number Flow Around a Ventilated Cavity