Abstract:Sulfate attack precipitates instability and degradation within calcium silicate (aluminate) hydrate (C-(A)-S-H) gel, the primary binding phase in cementitious materials. This degradation intricately correlates with the clinker phase composition, particularly the ratios of tricalcium silicate (C 3 S) and tricalcium aluminate (C 3 A). In this study, C 3 S and C 3 A were synthesized through solid-state sintering to create C 3 S-C 3 A pastes. The research aimed to examine the impact of varying C 3 A substitution levels and Na 2 SO 4 exposure durations on the microstructure and performance of these composite pastes. The findings reveal that C 3 A markedly accelerates both the early hydration kinetics and the overall hydration degree of C 3 S within the C 3 S-C 3 A system, with this effect becoming more pronounced with increasing C 3 A content. Furthermore, the inclusion of C 3 A elevates the Al[4]/Si ratio, mean chain length (MCL), and Ca/Si of the C-S-H gel. This leads to an increase in the overall porosity of the composite matrix while simultaneously diminishing its chloride-binding capacity. Exposure to Na 2 SO 4 disrupts the incorporation of Al 3+ , released during C 3 A hydration, into the bridging sites of the C-S-H structure, causing a decrease in the Al[4]/Si of the C-(A)-S-H gel. The leached aluminum subsequently reacts with SO 4 2- to form ettringite and other deleterious compounds. Additionally, Na 2 SO 4 exposure induces a significant reduction in the Ca/Si within the composite pastes, with the magnitude of decalcification inversely proportional to the initial Ca/Si—implying that higher C 3 A content exacerbates the decalcification process. During the process of sulfate attack, the formation of gypsum and AFt complicates the pore structure of the matrix, providing more adsorption sites for the binding of Cl - .

Effects of Fe and Al ions during hydrogen sulphide (H2S)-induced corrosion of tetracalcium aluminoferrite (C4AF) and tricalcium aluminate (C3A)

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

The Elemental Effects on the H2 Dissociative Adsorption on FeCrAl (110) Surface

Structure and properties of MgAlCuFe complex oxide for FCC desulfurization: effect of Fe and Cu contents

Preparation of Al-Cr-Fe Coatings by Heat Treatment of Electrodeposited Cr/Al Composite Coatings

Microstructural evolution and degradation mechanisms of tricalcium silicate and tricalcium aluminate composite pastes under sulfate exposure

Multi-scale investigation on composition-structure of C-(A)-S-H with different Al/Si ratios under attack of decalcification action

Influence of aluminate and silicate on selenate immobilization using alkaline-earth metal oxides and ferrous salt

Incipient Corrosion of FeCrAl Alloys in H3BO3- and LiOH-containing Pure Water at 360 °C and 18.5 MPa

Effect of Aluminium Substitution on Physical Adsorption of Chloride and Sulphate Ions in Cement-Based Materials

Corrosion evolution of 15CrMn steel in sulfur-containing sodium aluminate solution

Structure, dynamics and mechanical properties evolution of calcium-silicate-hydrate induced by Fe ions: A molecular dynamics study

Effect of Al2O3 on Sintering Reaction of Calcium Ferrite

Study of the Corrosion Mechanism of Iron-Based Amorphous Composite Coating with Alumina in Sulfate-Reducing Bacteria Solution

Dissolution and early hydration of tricalcium aluminate in aqueous sulfate solutions

The Effect of Sulphur on the Carburization of Three Fe-19Ni-13Cr Alloys with Various Al Additions at 900 °C in Oxygen-Contaminated CH4-H2-H2S Atmospheres

Insights into the Superior Stress Corrosion Cracking Resistance of FeCrAl Alloy in High Temperature Hydrogenated Water: the Critical Role of Grain Boundary Oxidation

Unraveling the effect of H2S on the corrosion behavior of high strength sulfur-resistant steel in CO2/H2S/Cl− environments at ultra high temperature and high pressure

Study of Corrosion Inhibition of Coupled Al2Cu–Al and Al3Fe–Al by Cerium Cinnamate Using Scanning Vibrating Electrode Technique and Scanning Ion-Selective Electrode Technique

Effect of sulfur on synergistic corrosion behavior of Q235 and 16Mn steel in sodium aluminate solution

Immobilization of erosion ions in seawater by Fe-Al bimetallic hydroxide