Abstract:The diffusion of chloride ions in reinforced concrete under the seawater environment will affect the physical or mechanical properties and durability. Sulfate ions also influence the diffusion of chloride ions by generating expansion products through physical and chemical reactions. Further research on the effects of chloride binding and sulfate ion attack on chloride ion diffusion will deepen the understanding of concrete failure mechanism. In this paper, a quaternary blend based on calcium sulfoaluminate (CSA) cement was prepared and laboratory immersion tests were conducted in artificial seawater with varying salt concentrations. Initially, chloride ion concentration measurements and XRD tests were conducted at different corrosion ages and salt concentrations. Subsequently, the chloride binding properties of CSA-based materials was quantified through the analysis of chloride ion concentration and the phases of hydration products. Meanwhile, the corrosive effect of sulfate ions on chloride ion diffusion was determined corresponds to the content of expansive hydration products. Furthermore, numerical simulations were employed to evaluate the impact of sulfate ion corrosion, chloride binding, and their combined effects on chloride ion diffusion, and the results were compared with free chloride ion concentration ( C f ). The results indicate that the total chloride ion concentration ( C t ) exhibits a linear relationship with increasing salt concentrations of seawater in CSA-based materials. Meanwhile, the bound chloride ion concentration ( C b ) follows a logarithmic growth pattern. The chloride binding rate experiences a linear decline with the increase of chloride ion concentration in the artificial seawater. Additionally, the relationship between C f and C b or C t can be described using different isothermal adsorption models for the CSA-based materials. Among these models, the Langmuir model is suitable for characterizing the relationship between C f and C b , while the Freundlich model is suitable for describing the relationship between C f and C t . Furthermore, it is noteworthy that sulfate ion attack and chloride binding exert nearly equivalent effects on the diffusion of chloride ions in CSA-based materials at short corrosion age and low chloride ion concentration. However, the corrosive impact of sulfate ions gradually evolves into the dominant factor in the progression of corrosion over time and the increase in seawater salt concentration.

Molecular dynamics simulations of ion migration and adsorption on the surfaces of AFm hydrates

Structure, orientation, and dynamics of water-soluble ions adsorbed to basal surfaces of calcium monosulfoaluminate hydrates

Corrosion Inhibition and Adsorption Behavior of (3-Aminopropyl)-triethoxysilane on Steel Surface in the Simulated Concrete Pore Solution Contaminated with Chloride

Insights on the chloride adsorption stability in cement mortar under current field and sulfate attack: From experiments to molecular dynamics simulation

Ab-initio modeling of chloride binding at hydrocalumite/sodium chloride solution interfaces

Chloride-induced Corrosion Patterns of Reinforcements in Simulated Pore Solutions of Calcium Sulfoaluminate Cement Concrete: an Analytical Study

Assessing the unsaturated transport and adsorption properties of ions in nanopores of realistic hydrated-calcium-silicate gel using molecular dynamics simulations

Molecular dynamics simulation of hydrocalumite as adsorbent for anionic radionuclides

Atomic-scale investigation of physical adsorption of water molecules and aggressive ions to ettringite's surfaces

Molecular dynamics study on coupled ion transport in aluminium-doped cement-based materials: Effect of concentration

Chloride binding behaviors and early age hydration of tricalcium aluminate in chloride-containing solutions

Chloride transport resistance of alkali-activated concrete exposed to combined chloride, sulfate and carbonation environment

Molecular dynamics simulation of coupled water and ion adsorption in the nano-pores of a realistic calcium-silicate-hydrate gel

Influence of Associated Cations on the Transport and Adsorption of Chloride Ions in the Nano-channel of Calcium Aluminosilicate Hydrate Gel: A Molecular Dynamics Study

Effects of Cyclic Seawater Exposure on the Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete

Molecular dynamics study of the effect of inorganic salts on the monolayer of four surfactants at the oil/water interface

Molecular dynamics of adsorption of hydroxide, sulfate and calcium ions at the interface between C-S-H and carbonate crystals

Structure, dynamics and mechanical properties evolution of calcium-silicate-hydrate induced by Fe ions: A molecular dynamics study

Effect of chloride binding and sulfate ion attack on the chloride diffusion in calcium sulfoaluminate-based material under seawater environment

Molecular Simulation of the Ions Ultraconfined in the Nanometer-Channel of Calcium Silicate Hydrate: Hydration Mechanism, Dynamic Properties, and Influence on the Cohesive Strength

Chloride binding to calcium silicate hydrates (C-S-H) in cement paste: a molecular dynamics analysis