Abstract:Optically transparent polymer films with excellent thermal and ultraviolet (UV) resistance have been highly desired in advanced optoelectronic fields, such as flexible substrates for photovoltaic devices. Colorless and transparent polyimide (CPI) films simultaneously possess the good thermal stability and optical transparency. However, conventional CPI films usually suffered from the UV exposure and have to face the deterioration of optical properties during the long-term service in UV environments. In the current work, the commercially available hindered amine light stabilizers (HALS) were tried to be incorporated into the semi-alicyclic CPI matrix with the aim of enhancing the UV exposure stability. For this target, a CPI-0 film was first prepared from hydrogenated pyromellitic dianhydride (HPMDA) and 2,2′-dimethylbenzidine (DMBZ) via a one-step polycondensation procedure. Then, the commercially available HALS were incorporated into the CPI-0 (HPMDA-DMBZ) film matrix to afford four series of CPI/HALS composite films. Experimental results indicated that the Tinuvin® 791 HALS showed the best miscibility with the CPI-0 film matrix and the derived CPI-D series of composite films exhibited the best optical transmittances. The CPI-D nanocomposite films showed apparently enhanced UV exposure stability via incorporation of the 791 additives. For the pristine CPI-0 film, after the UV exposure for 6 h, the optical properties, including the transmittance at the wavelength of 350 nm (T350), lightness (L*), yellow indices (b*), and haze obviously deteriorated with the T350 values from 55.7% to 17.5%, the L* values from 95.12 to 91.38, the b* values from 3.38 to 21.95, and the haze values from 1.46% to 9.33%. However, for the CPI-D-10 film (791: CPI-0 = 1.0 wt%, weight percent), the optical parameters were highly maintained with the T350 values from 61.4% to 53.8%, the L* values from 95.46 to 95.36, the b* values from 1.84 to 1.51, and the haze values from 0.69% to 3.34% under the same UV aging conditions.

A review on colorless and optically transparent polyimide films: Chemistry, process and engineering applications

High-temperature-resistant and Colorless Polyimide: Preparations, Properties, and Applications

Ultralow Coefficient of Thermal Expansion and a High Colorless Transparent Polyimide Film Realized Through a Reinforced Hydrogen-Bond Network by In Situ Polymerization of Aromatic Polyamide in Colorless Polyimide

Design, Synthesis and Properties of Semi-Alicyclic Colorless and Transparent Polyimide Films with High Glass Transition Temperatures and Low Retardation for Potential Applications in Flexible Electronics

High-Transparency and Colorless Polyimide Film Prepared by Inhibiting the Formation of Chromophores

Synthetic strategies for highly transparent and colorless polyimide film

Synthesis of UV-resistant and colorless polyimide films for optoelectrical applications

Transparent semi-aliphatic polyimide films with excellent thermal stabilities for applications in the display technology

Colorless Poly(amide-imide)s with Low Dielectric Constants and Enhanced Mechanical Properties through Tri-Armed Cross-Linkers

High comprehensive properties of colorless transparent polyimide films derived from fluorine-containing and ether-containing dianhydride

Synthesis of High-Performance Colorless Polyimides with Asymmetric Diamine: Application in Flexible Electronic Devices

From Molecular Design to Practical Applications: Strategies for Enhancing the Optical and Thermal Performance of Polyimide Films

Influence of direct fluorination treatment on surface and optical properties of colorless and transparent polyimides

Synthesis of colorless polyimides derived from benzimidazole diamines with bis‐amide structures

Synthesis of colorless transparent poly(amide-imide) with high modulus and low thermal expansion coefficient and its performance study

Enhancement of Ultraviolet Light Resistance of Colorless and Transparent Semi-Alicyclic Polyimide Nanocomposite Films via the Incorporation of Hindered Amine Light Stabilizers for Potential Applications in Flexible Optoelectronics

Synthesis and comparative study of high Tg and colorless polyamide‐imides with different amide‐to‐imide ratio

Terphenyl-based Colorless and Heat-resistant Polyimides with Controlled Molecular Structure by Methyl Side Groups

Synthesis and characterization of amide-bridged colorless polyimide films with low CTE and high optical performance for flexible OLED displays

Colorless transparent and thermally stable terphenyl polyimides with various small side groups for substrate application

Short-Side-Chain Regulation of Colorless and Transparent Polyamide-Imides for Flexible Transparent Displays