Abstract:This study reports a methodology for predicting surface roughness using data-driven models with grinding force as the input data. Prior to the model training process, the critical grinding parameters for brass material were selected and optimized using the Taguchi method. The experimental grinding force data were then collected and preprocessed into three features: the raw feature as the baseline feature, the statistical feature, and the fast Fourier transform (FFT) feature. The data were imported into a linear regression model as the baseline model and a deep neural network (DNN) model as the proposed strategy. The widely used surface roughness (Ra) of the ground workpiece was experimentally measured and served as the performance index. The model's performance was evaluated based on the mean absolute percentage error (MAPE) between the predicted and measured Ra values. The validation of the Ra prediction revealed that, among all test combinations, the DNN model with four hidden layers and the FFT feature as the input had the best performance of surface roughness prediction, with a MAPE of 3.17%. The independent testing and evaluation of the DNN model with the FFT feature yielded a MAPE of 6.96%, indicating that the proposed strategy effectively predicted the surface roughness of the workpiece. This work also proposes an automatic regrinding strategy in which the grinding system automatically regrinds the workpiece if the predicted Ra of the workpiece in the previous grinding process exceeds the threshold. Experimental results confirmed that among 24 ground areas, two areas have roughness exceeding the threshold and need to be regrind, and the proposed strategy can correctly identify and regrind these two areas (100% success rate). After automatic regrinding, the workpiece exhibited a roughness lower than the set threshold.

Real-time monitoring of silica ceramic composites grinding surface roughness based on signal spectrum analysis

An Intelligent Prediction of Surface Roughness on Precision Grinding

A Study on 3D Micro-Topographical Measurement of FRCMC Grinding Surface

Prediction and Verification Analysis of Grinding Force in the Single Grain Grinding Process of Fused Silica Glass

Some observations in grinding surface quality of FRCMC

Studies on the Surface Quality of the Unsteady-State Grinding Technique

A Study on Grinding Surface Waviness of Woven Ceramic Matrix Composites

An Experimental Investigation on Ultrasonic Vibration-Assisted Grinding of SiO2f/SiO2Composites

Application of improved fireworks algorithm in grinding surface roughness online monitoring

Grinding wheel wear monitoring based on wavelet analysis and support vector machine

Grinding surface roughness prediction for silicon nitride ceramics: A dynamic grinding force and frequency domain approach

Numerical prediction of surface morphology and roughness in rotary ultrasonic face grinding SiO2f/SiO2 composite

An online monitoring methodology for grinding state identification based on real-time signal of CNC grinding machine

Prediction and Measurement for Grinding Force in Wafer Self-Rotational Grinding

On-line monitoring of ultra-precision grinding process for aspherical surfaces by rotary acoustic emission signal

Online monitoring of precision optics grinding using acoustic emission based on support vector machine

Research On Optical Surface Quality Online Monitoring Based On Support Vector Machine

Research on On-Line Monitoring of Grinding Wheel Wear Based on Multi-Sensor Fusion

Real-time surface roughness estimation and automatic regrinding of ground workpieces using a data-driven model and grinding force inputs

An Investigation of Monitoring the Damage Mechanism in Ultra-Precision Grinding of Monocrystalline Silicon Based on AE Signals Processing

Wear-induced variation of surface roughness in grinding 2.5D C f /SiC composites