An in vitro assessment for human skin exposure to parabens using magnetic solid phase extraction coupled with HPLC

Tao Ning,Hucheng Yang,Chunxiang Shi,Jing Yu,Hao Yu,Pin Chen,Siyuan Di,Jiahao Wang,Shukui Zhu
DOI: https://doi.org/10.1016/j.chemosphere.2021.131593
IF: 8.8
2022-01-01
Chemosphere
Abstract:<p>Skin contact was a significant source of human exposure to parabens during the use of personal care products. In this study, a novel and simple <em>in vitro</em> evaluation method for human skin exposure to parabens was established for the first time. Firstly, magnetic porous carbon (MPC) derived from discarded cigarette butts was prepared as an adsorbent of magnetic solid-phase extraction (MSPE), which provided a fast and efficient sample preparation method with satisfactory extraction performance for parabens in cosmetics and was easy to couple with high performance liquid chromatography. Secondly, the extraction conditions were optimized including the etching ratio of KOH, amount of MPC, extraction time, pH, salt concentration, desorption solvent volume and desorption time. Under the optimized conditions, the limits of detection were between 0.25 and 0.34 ng mL<sup>−1</sup> and the spiked recoveries were in the range of 85.8–112.6%. Thirdly, the developed method was successfully employed to determine five typical parabens in real unspiked cosmetic samples, and two parabens were detected at a relatively high level. Then, the developed method was applied to <em>in vitro</em> assays. The absorbable dose of parabens in cream was investigated and <em>in vitro</em> experiments were further designed with agarose-simulated skin to demonstrate the penetration ability of parabens. In conclusion, these results indicated that parabens did have the risk of entering the body through the skin and the exposure was preferably no more than 3 h with skin contact.</p>
environmental sciences
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to evaluate the exposure risk of parabens, which are preservatives in cosmetics, to human skin contact. Specifically, the research aims to develop a new and simple in - vitro evaluation method for determining the dose of parabens that enter the human body through skin absorption and to explore their ability to penetrate the skin. The following are the key problems and solutions in the paper: 1. **Developing new adsorption materials**: - For the first time, researchers used magnetic porous carbon (MPC) derived from discarded cigarette butts as an adsorbent for magnetic solid - phase extraction (MSPE). This material provides a fast and efficient sample preparation method and can be coupled with high - performance liquid chromatography (HPLC) to meet the satisfactory extraction performance of parabens in cosmetics. 2. **Optimizing extraction conditions**: - To ensure the best extraction effect, researchers optimized multiple experimental parameters, including the KOH etching ratio, the amount of MPC, extraction time, pH value, salt concentration, desorption solvent volume, and desorption time. After optimization, the following optimal conditions were finally determined: - Amount of MPC: 10 mg - Desorption solvent: 2 mL of acetonitrile - Adsorption time: 30 minutes - Desorption time: 4 minutes - pH value: 7 - No NaCl added 3. **Analysis of actual samples**: - Researchers applied the developed method to analyze two hand cream samples. The results showed that two parabens (MeP and PrP) were detected in Cream 2 without spiking, with concentrations of 19.7 ng/mL and 23.6 ng/mL respectively. This proves the reliability and accuracy of this method in actual samples. 4. **In - vitro skin absorption study**: - To simulate human skin absorption, researchers designed two sets of experiments: - **Volunteer hand experiment**: Cream 2 was evenly smeared on the hands of volunteers. After 1 hour, 2 hours, 3 hours, 4 hours, and 5 hours respectively, the hands were washed with water, and the hand - washing water samples were collected for MSPE pretreatment. - **Agarose gel - simulated skin experiment**: Agarose gel was used instead of real skin tissue to simulate the skin penetration ability of parabens. The experimental results showed that parabens can indeed enter the human body through the skin, and it is recommended that the skin contact time should preferably not exceed 3 hours. In conclusion, this research has successfully developed a new in - vitro evaluation method, which can effectively monitor the skin absorption of parabens in cosmetics and provides a scientific basis for evaluating their risks to human health.