Abstract:Vertical wall surfaces with obstacles present a serious challenge for wall-climbing robots. Owing to their limitations in overcoming obstacles, these types of robots have not been commercialized yet. Several ideas on novel designs and precise control have been suggested; however, further research is required to achieve enhanced robot capabilities in overcoming obstacles. Specifically, the use of dry adhesive methods by wall-climbing robots to climb over obstacles present tremendous challenges. This study introduces the design of a new linkage-type, wall-climbing robot, based on dry adhesion, for uneven vertical surfaces. Based on a four-bar mechanism, repeated walking is achieved via a single actuator. The robot's most important feature is the linkage design used for climbing over obstacles, which has been adopted from rover running patterns. The symmetric linkage design renders the robot adaptable to uneven surfaces with a compliant motion. Additionally, flat dry adhesives were used for the attachment mechanism. The design parameters were determined based on kinematic and static analyses, and certain important issues in linkage-type wall-climbing robot designs were addressed. The robot's performance was verified using experiments, whereby it was able to climb up and go down stairs with maximum stair heights of 15 mm (equal to 0.6% of the robot's height) during open-loop vertical walking. We expect that the linkage design can extend the accessible area of the wall-climbing robot. This study introduces the design of a new linkage-type, wall-climbing robot, based on dry adhesion, for uneven vertical surfaces. Based on a four-bar mechanism, repeated walking is achieved via a single actuator. The robot's most important feature is the linkage design used for climbing over obstacles, which has been adopted from rover running patterns. The symmetric linkage design renders the robot adaptable to uneven surfaces with a compliant motion. Additionally, flat dry adhesives were used for the attachment mechanism. The design parameters were determined based on kinematic and static analyses, and certain important issues in linkage-type wall-climbing robot designs were addressed. The robot's performance was verified using experiments, whereby it was able to climb up and go down stairs with maximum stair heights of 15 mm (equal to 0.6% of the robot's height) during open-loop vertical walking. We expect that the linkage design can extend the accessible area of the wall-climbing robot. (C) 2018 Elsevier Ltd. All rights reserved.

Compliant Wall-Climbing Robotic Platform for Various Curvatures

Self-compliant Track-type Wall-climbing Robot for Variable Curvature Facade

Design and analysis of a wall-climbing robot with passive compliant mechanisms to adapt variable curvatures walls

Design and Performance Analysis of a Tracked Wall-Climbing Robot for Ship Inspection in Shipbuilding

AnyClimb-II: Dry-adhesive Linkage-Type Climbing Robot for Uneven Vertical Surfaces

Design and Analysis of Curvature Adaptive Wall Climbing Robot

Design of a Curved Surface Adaptive Permanent Magnet Wall Climbing Robot

Steerable Dry-Adhesive Linkage-Type Wall-Climbing Robot

Analysis and Optimization of the Wall-Climbing Robot with an Adsorption System and Adhesive Belts

Design and analysis of a passive adaptive wall-climbing robot on variable curvature ship facades

A 6-DOF Humanoid Wall-Climbing Robot with Flexible Adsorption Feet Based on Negative Pressure Suction

Optimization Design and Trajectory Error Compensation of a Facade-Adaptive Wall-Climbing Robot

Design, Modeling and Experimentation of a Biomimetic Wall-climbing Robot for Multiple Surfaces

A Soft, Lightweight Flipping Robot with Versatile Motion Capabilities for Wall-Climbing Applications

Linkage-Type Walking Mechanism For Unstructured Vertical Wall

A Wall-Climbing Robot Using Gecko-Inspired Dry Adhesives and Underactuated Modular Connecting Mechanism

A wheeled wall-climbing robot with a climbing leg

An Active Compliance Adsorption Method for Climbing Machining Robot on Variable Curvature Surface

DESIGN AND TESTING OF A WALL-CLIMBING ROBOT WITH UNDER-ACTUATED FORCE ADJUSTING MECHANISM

A Wheel-Leg Hybrid Wall Climbing Robot with Multi-Surface Locomotion Ability

A Bio-inspired Wall-climbing Robot with Claw Wheels and Adhesive Tracks