Abstract:This paper presents the design of a novel robot capable of climbing on vertical and rough surfaces, such as stucco walls. Termed CLIBO (claw inspired robot), the robot can remain in position for a long period of time. Such a capability offers important civilian and military advantages such as surveillance, observation, search and rescue and even for entertainment and games. The robot’s kinematics and motion, is a combination between mimicking a technique commonly used in rock climbing using four limbs to climb and a method used by cats to climb on trees with their claws. It uses four legs, each with four-degrees-of-freedom (4-DOF) and specially designed claws attached to each leg that enable it to maneuver itself up the wall and to move in any direction. At the tip of each leg is a gripping device made of 12 fishing hooks and aligned in such a way that each hook can move independently on the wall’s surface. This design has the advantage of not requiring a tail-like structure that would press against the surface to balance its weight. A locomotion algorithm was developed to provide the robot with an autonomous capability for climbing along the pre-designed route. The algorithm takes into account the kinematics of the robot and the contact forces applied on the foot pads. In addition, the design provides the robot with the ability to review its gripping strength in order to achieve and maintain a high degree of reliability in its attachment to the wall. An experimental robot was built to validate the model and its motion algorithm. Experiments demonstrate the high reliability of the special gripping device and the efficiency of the motion planning algorithm.

Steerable Dry-Adhesive Linkage-Type Wall-Climbing Robot

Design and Performance Analysis of a Tracked Wall-Climbing Robot for Ship Inspection in Shipbuilding

Development of a wall-climbing robot using a tracked wheel mechanism

Design and Development of Wall Climbing Robot

Development of a wheeled wall‐climbing robot with an internal corner wall adaptive magnetic adhesion mechanism

A Path Tracking Method of a Wall-Climbing Robot towards Autonomous Inspection of Steel Box Girder

Hybrid electrostatic and elastomer adhesion mechanism for wall climbing robot

Design of Permanent Magnetic Wheel-Type Adhesion-Locomotion System for Water-Jetting Wall-Climbing Robot

Self-compliant Track-type Wall-climbing Robot for Variable Curvature Facade

Optimization Design and Trajectory Error Compensation of a Facade-Adaptive Wall-Climbing Robot

A Worm-Inspired Robot Flexibly Steering on Horizontal and Vertical Surfaces

A Biomimetic Wheel-Track Wall-Climbing Robot Based on Rolling Adsorption Mechanism

Design and analysis of a negative pressure wall-climbing robot with an omnidirectional characteristic for cylindrical wall

Design and analysis of a wall-climbing robot with passive compliant mechanisms to adapt variable curvatures walls

Design of a Curved Surface Adaptive Permanent Magnet Wall Climbing Robot

Design and motion planning of an autonomous climbing robot with claws

Development and Experimental Study of Multi-Motion Model Robot with Wheel-Track Compound Structure

A magnetic wall climbing robot with non-contactable and adjustable adhesion mechanism

Design of Transverse Brachiation Robot and Motion Control System for Locomotion between Ledges at Different Elevations

Optimization design and experimental research on magnetic components for wall-climbing robot

Design and analysis of anti-overturning mechanism for magnetic wall-climbing robot