Abstract:Reinforced concrete structures are widely used in bridge engineering and various infrastructures. However, material aging, poor load, and a complex service environment will lead to internal damage and resistance decay of the structure. Therefore, real-time monitoring of internal stresses is critical for evaluating structural health, providing timely warnings of potential failures, and ensuring reliable operations. This paper presents the design and fabrication of an embedded three-direction normal stress sensor based on PMN-PT piezoelectric single crystals, capable of simultaneously monitoring normal stresses in three orthogonal directions within a structure. The sensor comprises a high-strength concrete cube base, cover plate, copper sheet, PMN-PT patch, epoxy resin package layer, and shielding wire. To test the sensor's sensing performance, sinusoidal reciprocating, square wave, random, and sweep loads were applied, and the sensor output response and frequency response characteristics tests were carried out. Moreover, to assess the feasibility and accuracy of the sensor in monitoring internal three-direction normal stresses in actual structures, three sensors were embedded in a reinforced concrete beam, and dynamic stress monitoring experiments were conducted. The process was also simulated using COMSOL software. The results demonstrated that the sensor has a regular shape, is simple to fabricate, has a uniform sensitivity of 1.53 V/Mpa, and provides stable output signals with superior frequency response characteristics. The experimental and simulation results agree well, with the embedded sensors sensitively detecting internal stress variations and the voltage and stress outputs exhibiting a maximum error of less than 4.5 %. The research results can serve as an essential reference and guide for monitoring internal stresses in large-scale structures.

Investigation of stress rupture properties of micro beams using the piezoresistive effect

Two-dimensional stress measurement of a micromachined piezoresistive structure with micro-Raman spectroscopy

Analysis and Design of a Novel Piezoresistive Accelerometer with Axially Stressed Self-Supporting Sensing Beams

A new in situ residual stress measurement method for a MEMS thin fixed-fixed beam structure

Design of Piezoresistive Micro-Cantilever with Stress Concentration Regions

Development of a High-Performance Microaccelerometer With Position Independent Pure-Axial Stressed Piezoresistive Beams

Design of a Beam-Membrane Piezoresistive Accelerometer Based on MEMS Technology

The study of acceleration effect for piezoresistive micro pressure sensor

Fracture analysis of an interfacial crack in a piezoelectric smart beam

A Two-Axis MEMS Piezoresistive In-Plane Accelerometer with Pure Axially Deformed Microbeams

Dimension effect on mechanical behavior of silicon micro-cantilever beams

Research on A Multi-Layer Piezoelectric Structure Applied in Beam As A Sensor

Flexoelectric Effect on Vibration of Piezoelectric Microbeams Based on a Modified Couple Stress Theory

Piezoresistive Micro-Accelerometer with Supplement Structure.

Dynamic Monitoring of Steel Beam Stress Based on PMN-PT Sensor

Modeling of gold microbeams as strain and pressure sensors for characterizing MEMS packages

A High-Performance Micromachined Piezoresistive Accelerometer with Axially Stressed Tiny Beams

Characterization of Residual Stress in SOI Wafers by Using MEMS Cantilever Beams

A Piezoresistive Accelerometer with Axially Stressed Tiny Beams for Both Much Increased Sensitivity and Much Broadened Frequency Bandwidth

A Double-End Fixed Beam Structure of MEMS Piezoresistive High G Accelerometer

Dynamic stress monitoring for RC beam using PMN-PT-based three-direction normal stress sensor