Abstract:The internal pore structural characteristics and microbubble distribution features of concrete have a significant impact on its frost resistance, but their size is relatively small compared to aggregates, making them difficult to visually represent in the mesoscopic numerical model of concrete. Therefore, based on the ice-crystal phase transition mechanism of pore water and the theory of fine-scale inclusions, this paper establishes an estimation model for effective thermal conductivity and permeability coefficients that can reflect the distribution characteristics of the internal pore size and the content of microbubbles in porous media and explores the evolution mechanism of effective thermal conductivity and permeability coefficients during the freezing process. The segmented Gaussian integration method is adopted for the calculation of integrals involving pore size distribution curves. In addition, based on the concept that the fracture phase represents continuous damage, a switching model for the permeability coefficient is proposed to address the fundamental impact of frost cracking on permeability. Finally, the proposed estimation models for thermal conductivity and permeability are applied to the cement mortar and the interface transition zone (ITZ), and a thermal-hydraulic-mechanical coupling finite element model of concrete specimens at the mesoscale based on the fracture phase-field method is established. After that, the frost-cracking mechanism in ordinary concrete samples during the freezing process is explored, as well as the mechanism of microbubbles in relieving pore pressure and the adverse effect of accelerated cooling on frost cracking. The results show that the cracks first occurred near the aggregate on the concrete sample surface and then extended inward along the interface transition zone, which is consistent with the frost-cracking scenario of concrete structures in cold regions.

Mesoscopic Simulation of Chloride Ions Diffusion in Frost-Damaged Concrete

Mesoscale Modeling of Chloride Penetration in Unsaturated Concrete Damaged by Freeze-Thaw Cycling

PREDICTION OF DIFFUSIVITY FOR FROST-DAMAGED CONCRETE BY THE MESOSCOPIC TRUSS NETWORK MODEL

A Numerical Study on Chloride Diffusion in Freeze-Thaw Affected Concrete

Mesoscopic simulation of water absorption in frost damaged concrete

Mesoscale Simulation of Concrete Behavior with Non-Uniform Frost Damage with Verification by CT Imaging

Mesoscopic Simulation for Chloride Diffusion in Concrete

Modeling of chloride ions diffusion in cracked concrete

Two‐dimensional Rigid Body Spring Method Based Micro‐mesoscale Study of Mechanical Strengthening/damaging Effects to Concrete by Frost Action

Mesoscale Simulation of Bond Behaviors Between Concrete and Reinforcement under the Effect of Frost Damage with Axisymmetric Rigid Body Spring Model

Mesoscale Simulation of Fatigue Behavior of Concrete Materials Damaged by Freeze-Thaw Cycles

A Numerical Study on Chloride Migration in Cracked Concrete Using Multi-Component Ionic Transport Models

Mesoscale Simulation of Chloride Diffusion in Concrete Considering the Binding Capacity and Concentration Dependence

Chloride Penetration in Freeze–thaw Induced Cracking Concrete: A Numerical Study

Meso-scale Modeling of Chloride Diffusion in Concrete with Consideration of Effects of Time and Temperature

Simulation of Frost-Heave Failure of Air-Entrained Concrete Based on Thermal-Hydraulic-Mechanical Coupling Model

Mesoscale Simulation of Chloride Diffusion in Concrete Subjected to Flexural Loading

Model of Chloride Penetration into Cracked Concrete Subject to Drying–wetting Cycles

Simulation of Chloride Diffusivity for Cracked Concrete Based on RBSM and Truss Network Model

Mesoscale Modelling of the Chloride Diffusion in Cracks and Cracked Concrete

Mesoscale Simulation of Influence of Frost Damage on Mechanical Properties of Concrete