Abstract:The internal pore structural characteristics and microbubble distribution features of concrete have a significant impact on its frost resistance, but their size is relatively small compared to aggregates, making them difficult to visually represent in the mesoscopic numerical model of concrete. Therefore, based on the ice-crystal phase transition mechanism of pore water and the theory of fine-scale inclusions, this paper establishes an estimation model for effective thermal conductivity and permeability coefficients that can reflect the distribution characteristics of the internal pore size and the content of microbubbles in porous media and explores the evolution mechanism of effective thermal conductivity and permeability coefficients during the freezing process. The segmented Gaussian integration method is adopted for the calculation of integrals involving pore size distribution curves. In addition, based on the concept that the fracture phase represents continuous damage, a switching model for the permeability coefficient is proposed to address the fundamental impact of frost cracking on permeability. Finally, the proposed estimation models for thermal conductivity and permeability are applied to the cement mortar and the interface transition zone (ITZ), and a thermal-hydraulic-mechanical coupling finite element model of concrete specimens at the mesoscale based on the fracture phase-field method is established. After that, the frost-cracking mechanism in ordinary concrete samples during the freezing process is explored, as well as the mechanism of microbubbles in relieving pore pressure and the adverse effect of accelerated cooling on frost cracking. The results show that the cracks first occurred near the aggregate on the concrete sample surface and then extended inward along the interface transition zone, which is consistent with the frost-cracking scenario of concrete structures in cold regions.

PREDICTION OF DIFFUSIVITY FOR FROST-DAMAGED CONCRETE BY THE MESOSCOPIC TRUSS NETWORK MODEL

A Numerical Study on Chloride Diffusion in Freeze-Thaw Affected Concrete

Mesoscale Simulation of Concrete Behavior with Non-Uniform Frost Damage with Verification by CT Imaging

Modeling of chloride ions diffusion in cracked concrete

Two‐dimensional Rigid Body Spring Method Based Micro‐mesoscale Study of Mechanical Strengthening/damaging Effects to Concrete by Frost Action

Theoretical and Experimental Investigation of Loading Effects on Chloride Diffusion in Saturated Concrete

RBSM based analysis on mechanical degradation of non-air entrained concrete under frost action – A general prediction with various water cement ratio, lowest temperatures and FTC numbers

Model of Chloride Penetration into Cracked Concrete Subject to Drying–wetting Cycles

Mesoscale Simulation of Fatigue Behavior of Concrete Materials Damaged by Freeze-Thaw Cycles

A Multi-Phase Model for Predicting the Effective Diffusion Coefficient of Chlorides in Concrete

Corrosion-Induced Concrete Cracking Model Considering Corrosion-Filled Paste

Simulation of Frost-Heave Failure of Air-Entrained Concrete Based on Thermal-Hydraulic-Mechanical Coupling Model

Prediction of Effective Chloride Diffusivity of Cement Paste and Mortar from Microstructural Features

MECHANISM AND MATHEMATIC MODELING OF CHLORIDE PERMEATION IN CONCRETE UNDER UNSATURATED STATE

Mesoscale Simulation of Bond Behaviors Between Concrete and Reinforcement under the Effect of Frost Damage with Axisymmetric Rigid Body Spring Model

Estimation of Ice Formation in Mortar Saturated with Sodium Chloride Solutions

Diffusion Model Of Chloride Ion In Concrete And Its Verification

A Numerical Study on Chloride Migration in Cracked Concrete Using Multi-Component Ionic Transport Models

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Meso-scale mechanical model for mortar deformation under freeze thaw cycles