Abstract:A novel photoluminescence electron beam resist made from the blend of poly(3-hexylthiophene) (P3HT) and poly(methyl methacrylate) (PMMA) has been successfully developed in this study. In order to optimize the resolution of the electron beam resist, the variations of nanophase separated morphology produced by differing blending ratios were examined carefully. Concave P3HT-rich island-like domains were observed in the thin film of the resist. The size of concave island-like domains decreased from 350 to 100 nm when decreasing the blending ratio of P3HT/PMMA from 1:5 to 1:50 or lower, concurrently accompanied by significant changes in optical properties and morphological behaviors. The lambda(max) of the film absorption is blue-shifted from 520 to 470 nm, and its lambda(max) of photoluminescence (PL) is also shifted from 660 to 550 nm. The radiative lifetime is shorter while the luminescence efficiency is higher when the P3HT/PMMA ratio decreases. These results are attributed to the quantum confinement effect of single P3HT chain isolated in PMMA matrix, which effectively suppresses the energy transfer between the well-separated polymer chains of P3HT. The factors affecting the resolution of the P3HT/PMMA electron beam resists were systematically investigated, including blending ratios and molecular weight. The photoluminescence resist with the best resolution was fabricated by using a molecular weight of 13 500 Da of P3HT and a blending ratio of 1:1000. Furthermore, high-resolution patterns can be obtained on both flat silicon wafers and rough substrates made from 20 nm Au nanoparticles self-assembled on APTMS (3-aminopropyltrimethoxysilane)-coated silicon wafers. Our newly developed electron beam resist provides a simple and convenient approach for the fabrication of nanoscale photoluminescent periodic arrays, which can underpin many optoelectronic applications awaiting future exploration.

Pr-based Metallic Glass Films Used As Resist for Phase-Change Lithography.

Metallic Resist for Phase-Change Lithography.

Thin-film based phase plates for transmission electron microscopy fabricated from metallic glasses

Evaluation of Cr-based thin film metallic glass as a potential replacement of PVD chromium coating on plastic mold surface

CO2‐Based Dual‐Tone Resists for Electron Beam Lithography

Chemically Amplified Resist Based on Dendritic Molecular Glass for Electron Beam Lithography

Nanoscale-Patterned Cr Films by Selective Etching Using a Heat-Mode Resist: Implications for X-ray Beam Splitter

Non-Iridescent Metal Nanomesh with Disordered Nanoapertures Fabricated by Phase Separation Lithography of Polymer Blend as Transparent Conductive Film

Hybrid laser micro/nanofabrication of phase change materials with combination of chemical processing

Molecular Glass Resists for Next Generation Lithography

Self-assembled Liquid Metal Nanoporous Film with Durability for Efficient Phase-Change Thermal Energy Management Via Surface and Interface Engineering

Fabrication of patterned transparent conductive glass via laser metal transfer for efficient electrical heating and antibacteria

Phase-Type Fresnel Zone Plate with Multi-Wavelength Imaging Embedded in Fluoroaluminate Glass Fabricated via Ultraviolet Femtosecond Laser Lithography

Manipulation Of Nanoscale Phase Separation And Optical Properties Of P3ht/Pmma Polymer Blends For Photo Luminescent Electron Beam Resist

Fabrication of micro/nano multifunctional patterns on optical glass through chalcogenide heat-mode resist AgInSbTe

Ge2Sb2Te5 Thin Film As a Promising Heat‐Mode Resist for High‐Resolution Direct Laser Writing Lithography

A Novel Nano-Porous Aluminum Substrate With Anodizing Treatment To Encapsulate 1-Tetrapropanol As Composite Phase Change Materials For Thermal Energy Utilization

Ultra-high-density Phase-Change Storage Using AlNiGd Metallic Glass Thin Film As Recording Layer

Thermoplastic Forming of a Hydrophilic Surface with a Nanostructure Array on Zr-Cu-Ni-Al-Y Bulk Metallic Glass

Low Resistivity Glass Metallization by Laser Induced Plasma Assisted Ablation (Lipaa)

CrSb2Te thin film as a dry resist and its etching mechanism for lithography application