Abstract:Recently, silver nanowire-based transparent conductive films (AgNW-based TCFs) with excellent comprehensive performance have aroused wide and great interest. However, it is always difficult to simultaneously improve the performances of TCFs in all aspects. In this work, by introducing silica nanoparticles (SiO2-NPs) with a smaller particle size, several properties of AgNW-based TCFs were optimized successfully. The transmittance and conductivity were improved simultaneously, and smaller particle size was proven to be more suitable to achieve TCFs with excellent optoelectrical properties. Typically, an AgNW/SiO2-based TCF with a sheet resistance of 250 Ω/sq and transmittance of 93.6% (including the poly (ethylene terephthalate) substrate, abbreviated as PET) could be obtained by using SiO2-NPs with a size of ∼21 nm, and this transmittance is even higher than that of the bare PET (91.8%) substrate. We demonstrated that the layer formed through self-assembly of SiO2-NPs can cut down the light scattering on the AgNW surface through total reflection, thus leading to a low haze of AgNW/SiO2-based TCFs. Very interestingly, the SiO2-NPs conducted away most of the heat generated during laser ablation, protecting the AgNWs from excessive melt and PET from empyrosis, and thus ensuring the TCFs with high transmittance and patterning accuracy. Besides, AgNW/SiO2-based TCFs have smaller surface roughness, better flexibility, and adhesive force. To the best of our knowledge, the comprehensive performance of the AgNW/SiO2-based TCFs reaches the highest level among recently reported novel TCFs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16542?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16542</a>.Schematic depiction of the measurement of transmittance; detailed parameters used for simulation; SEM/TEM images of SiO2 nanoparticles with different diameters, optical photo of corresponding SiO2 solution, SEM/TEM image of AgNWs used in this study, and XRD pattern/EDX spectrum of SiO2; cross-sectional SEM image of AgNW/SiO2-based TCFs and TEM image of the mixture of SiO2-NPs and AgNWs; variation of the refractive index of the silica nanoparticle-constructed film along with the increase of wavelength; the refractive index of different materials at 550 nm; comparison of properties of TCFs reported in this work and literatures; SEM and AFM characterization results of the PET substrate; SEM image of AgNW/SiO2-based TCFs with different SiO2-NP diameters; T4 and T2 curves of TCFs in the range of 300–800 nm by using different concentration of SiO2-NPs; light path analysis and light scattering calculation on AgNWs in different situations; SEM images of AgNW-based and AgNW/SiO2-based TCFs with different ablation spacing; SEM images of the cross position, the corresponding PET substrate morphology, and schematic showing heat conduction; characterization of the conductivity at different positions for a AgNW/SiO2-based TCF; influence of bending and tape peeling cycles on conductivity of TCFs and SEM images of TCFs after experiencing bending and tape peeling tests; schematic structure and optical photo of a capacitive touch screen by using AgNW/SiO2-based TCFs (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16542/suppl_file/am0c16542_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A high impedance folded dipole antenna with three conductors for energy harvesting applications

High-Performance Transparent and Conductive Films with Fully Enclosed Metal Mesh.

Templateless, Plating‐Free Fabrication of Flexible Transparent Electrodes with Embedded Silver Mesh by Electric‐Field‐Driven Microscale 3D Printing and Hybrid Hot Embossing

Flexible Embedded Metal Meshes by Sputter-Free Crack Lithography for Transparent Electrodes and Electromagnetic Interference Shielding

Fabrication of high-quality flexible transparent conductive thin films with a Nb2O5/AgNWs/Nb2O5 sandwich structure

Directly Printed Embedded Metal Mesh for Flexible Transparent Electrode via Liquid Substrate Electric‐Field‐Driven Jet

Site-selective Fabrication of Patterned Transparent Copper Mesh on Flexible Substrates at Mild Temperature for Green, Low Cost Electronics

Copper Mesh Templated by Breath-Figure Polymer Films As Flexible Transparent Electrodes for Organic Photovoltaic Devices.

Solution process formation of high performance, stable nanostructured transparent metal electrodes via displacement-diffusion-etch process

Low Cost and Facile Fabrication of a Micro‐Mold with High Aspect Ratio for Transparent Electrodes with Metal Mesh Using Micro‐Scale 3D Printing

High-Performance Flexible Transparent Electrode with an Embedded Metal Mesh Fabricated by Cost-Effective Solution Process.

Screen-Printed Metamaterial Absorber Using Fractal Metal Mesh for Optical Transparency and Flexibility

Silver‐Nanowire Mesh‐Structured Transparent Conductive Film with Improved Transparent Conductive Properties and Mechanical Performance

Large area nanoscale metal meshes for use as transparent conductive layers

Metal Nanogrids, Nanowires, and Nanofibers for Transparent Electrodes

Some factors affecting the release of imipramine from gel‐precipitated aluminium hydroxide spheres

Flexible transparent electrode with embedded silver mesh by eco-friendly polymer solution-assisted metal transfer process

A Novel Strategy of Fabricated Flexible ITO Electrode by Liquid Metal Ultra-Thin Oxide Film

High-Performance Flexible Transparent Conductive Films Enabled by a Commonly Used Antireflection Layer

The Fabrication of Cu Nanowire/graphene/al Doped ZnO Transparent Conductive Film on PET Substrate with High Flexibility and Air Stability

Electric field driven printing of repeatable random metal meshes for flexible transparent electrodes