Abstract:A novel microfluidic picoliter-scale sample introduction approach was developed by combining the spontaneous injection approach with a capillary electrophoresis (CE) system based on a short capillary and slotted-vial array. A droplet splitting phenomenon at the capillary inlet end during the spontaneous sample introduction process was observed for the first time. On the basis of this phenomenon, a translational spontaneous injection approach was established to reduce sample injection volumes to the sub-100 pL range. A versatile high-speed capillary electrophoresis (HSCE) system was built on the basis of this sample injection approach with separation performance comparable to or even better than those reported in microfluidic chip-based CE systems. The HSCE system was composed of a short fused-silica capillary and an automated sample introduction system with slotted sample and buffer reservoirs and a computer-programmed translational stage. The translational spontaneous sample injection was performed by linearly moving the stage, allowing the capillary inlet first to enter the sample solution and then removing it. A droplet was left at the tip end and spontaneously drawn into the capillary by surface tension effect to achieve sample injection. The stage was continuously moved to allow the capillary inlet to be immersed into the buffer solution, and CE separation was performed by applying a high voltage between the buffer and waste reservoirs. With the use of the novel system, high-speed and efficient capillary zone electrophoresis (CZE) separation of a mixture of five fluorescein isothiocyanate (FITC) labeled amino acids was achieved within 5.4 s in a short capillary with a separation length of 15 mm, reaching separation efficiencies up to 0.40 microm plate height. Outstanding peak height precisions ranging from 1.2% to 3.7% RSD were achieved in 51 consecutive separations. By extension of the separation length to 50 mm, both high-speed and high-resolution CZE separation of eight FITC-labeled amino acids could be obtained in less than 21 s with theoretical plates ranging from 163,000 to 251,000 (corresponding to 0.31-0.20 microm plate heights). The present HSCE system also allowed fast chiral separations of FITC-labeled amino acids under micellar electrokinetic chromatography (MEKC) mode within 6.5 s.

Enhancing Resolution of Free-Flow Zone Electrophoresis Via A Simple Sheath-Flow Sample Injection

Controlling of band width, resolution and sample loading by injection system in a simple preparative free-flow electrophoresis with gratis gravity.

Quantitative Investigation of Resolution Increase of Free‐flow Electrophoresis Via Simple Interval Sample Injection and Separation

A Microchip Device to Enhance Free Flow Electrophoresis Using Controllable Pinched Sample Injections

A Simple Preparative Free‐flow Electrophoresis Joined with Gratis Gravity: I. Gas Cushion Injector and Self‐balance Collector Instead of Multiple Channel Pump

Microfluidic Picoliter-Scale Translational Spontaneous Sample Introduction for High-Speed Capillary Electrophoresis

A novel cross-H-channel interface for flow injection-capillary electrophoresis to reduce sample requirement and improve sensitivity.

Combination of flow injection with capillary electrophoresis. Part 6.: A bias-free sample introduction system based on electroosmotic-flow traction

Negative Pressure Pinched Sample Injection for Microchip-Based Electrophoresis.

A Simple and Highly Stable Free-Flow Electrophoresis Device with Thermoelectric Cooling System.

Manipulation and Characterization of a Micro-Fluidic System Based on Capillary Electrophoresis Coupling to Flow Injection

A Pressure-Driven Capillary Electrophoretic System with Injection Valve Sampling.

Improved High-Speed Capillary Electrophoresis System Using A Short Capillary and Picoliter-Scale Translational Spontaneous Injection

Study of Flow Injection-Negatively Pressurized Sampling Equipment in Capillary Electrophoresis

Mid-Scale Free-Flow Electrophoresis with Gravity-Induced Uniform Flow of Background Buffer in Chamber for the Separation of Cells and Proteins

Free-flow zone electrophoresis: a novel approach and scale-up for preparative protein separation

Optimizing band width and resolution in micro-free flow electrophoresis

Combination of flow injection with capillary electrophoresis. Part I. The basic system

High‐speed Separation of Proteins by Sodium Dodecyl Sulfate‐capillary Gel Electrophoresis with Partial Translational Spontaneous Sample Injection

The Combination of Flow Injection with Electrophoresis Using Capillaries and Chips

Rapid and Efficient Isotachophoretic Preconcentration in Free Solution Coupled with Gel Electrophoresis Separation on a Microchip Using a Negative Pressure Sampling Technique.