Abstract:Utilizing MgO as the precursor and deionized water as the solvent, this study synthesized nanoparticles of Mg(OH)2 via hydrothermal methods, aiming to control its purity, particle size, and morphology by understanding its growth under non-uniform nucleation. Characterization of crystal morphology and structure was conducted through scanning electron microscopy and X-ray diffraction, while laser particle size detection assessed the secondary particle size distribution. The study focused on how MgO's hydrothermal process conditions influence Mg(OH)2 crystal growth, particularly through ion concentration and release rate adjustments to direct crystal growth facets. These adjustments shifted the dominant growth plane, enhancing the peak intensity ratio I001/I101 from 1.03 to 2.14, thereby reducing surface polarity and secondary aggregation of crystals. The study of the physicochemical properties of the same sample at different times revealed the pattern of crystal dissolution and recrystallization. A 2 h hydrothermal reaction notably altered the particle size distribution, with a decrease in particles sized 0.2~0.4 μm and an increase in those sized 0.4~0.6 μm, alongside new particles over 1 μm, indicating a shift toward uniformity through dissolution and recrystallization. Optimal conditions (6% magnesium oxide concentration, 160 °C, 2 h) led to the synthesis of highly dispersed, uniformly sized magnesium hydroxide, showcasing a simple, eco-friendly, and high-yield process.

Characterizations and Preparation of Mg(OH) 2 Nanocrystals Through Ultrasonic–hydrothermal Route

Preparation of Polypropylene/MMT Nanocomposites Using Complex Supported Catalysts

Preparation of Magnesium Hydroxide Chloride Hydrate Nanowires Using Calcined Dolomite

Influence of synthesis condition on magnesium hydroxide properties by two-step reaction on pilot scale

Low-temperature synthesis of Mg(OH)2 nanoparticles from MgO as halogen-free flame retardant for polypropylene

The Role of Halloy Site on Crystallinity, Ion Conductivity, Thermal and Mechanical Properties of Poly(ethylene-Oxide)/halloysite Nanocomposites

Preparation of Cu/OMMT/LLDPE Nanocomposites and Synergistic Effect Study of Two Different Nano Materials in Polymer Matrix

Crystallization Behavior and Thermal Properties of PP/MgAl LDH Nanocomposites Prepared in Non-polar Solution

Ultrasonic-assisted Synthesis of Hydrophobic Magnesium Hydroxide Nanoparticles

Preparation of highly-dispersed Mg(OH)2 powders and influence factors

Crystallization and Mechanical Properties of Polypropylene Filled with Sio2 Nanoparticles

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Poly(vinyl Pyrrolidone)-Assisted Hydrothermal Synthesis of Pb(Zr0.52Ti0.48)O3 Nanocrystals

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Nanoscale magnesium hydroxide and magnesium oxide powders: Control over size, shape, and structure via hydrothermal synthesis

The Flame-retardant and Mechanical Properties Study of Mg(OH)_2 Nanoparticles/polypropylene Nanocomposites

Synthesis and characterization of MgSO4·5Mg(OH)2·2H2O flake powders

Preparation and characterization of Mg(OH)2 nanoparticles and flame-retardant property of its nanocomposites with EVA

Investigation of Crystallization Growth Characteristics of Mg(OH)2 Crystals under Unconstrained Conditions

Magnesium Nitrate As Additive for Synthesis of Mg(OH)2 Nanoparticles

Synthesis of Mg(Oh)(2) Nanoparticles from Mgo Using Magnesium Acetate As Additive