Abstract:Intermediate temperature solid oxide fuel cells (IT-SOFC) operate at temperatures <800 degrees C, permitting the use of relatively inexpensive metallic interconnects, such as ferritic stainless steels. Long term SOFC operation is limited, however, by the resistivity and volatility of the protective chromia scale that forms on the steel surface. To overcome these limitations, protective and conductive coatings can be applied to the steel surface. Two novel methods of applying such coatings are studied in this work. In the first approach, Mn-Co spinel oxides are anodically electrodeposited from aqueous solutions containing Mn and Co divalent ions. By controlling the solution composition and deposition parameters, dense and crack free deposits can be obtained. The as deposited oxide coatings are nanocrystalline, with a defective NaCl-type structure. The spinel structure is obtained through subsequent annealing at temperatures in excess of 500 degrees C. Oxidation tests at 800 degrees C show significantly improved oxidation resistance compared with uncoated ferritic stainless steels. In the second approach, composite coatings consisting of dispersed conductive LaCrO3 particles in a Ni matrix are electrodeposited onto ferritic stainless steel substrates. Co-deposition is performed using a Wafts Ni plating bath containing suspended LaCrO3 particles. The effects of particle loading in the bath, deposition current density, solution pH and electrolyte hydrodynamics on the volume fraction of embedded particles in the coatings have been studied and optimized. Upon oxidation in air, NiO forms on the steel surface. NiO is not protective; however, a protective layer of chromia (Cr2O3) forms beneath. The LaCrO3 particles are incorporated into the chromia scale and provide a stable, conductive path through the oxide layer.

Interactions Between Sofc Interconnect Coating Materials and Chromia

Transition Metal Spinel Oxide Coatings for Reducing Chromium Poisoning in SOFCs

Review—(Mn,Co)3O4-Based Spinels for SOFC Interconnect Coating Application

Effect of Chromium Doping on the Crystal Structure, Electrical Conductivity and Thermal Expansion of Manganese Cobalt Spinel Oxides

Protective coatings for Cr2O3-forming interconnects of solid oxide fuel cells

Crystal Structure, Chemical Stabilities And Electrical Conductivity Of Fe-Doped Manganese Cobalt Spinel Oxides For Sofc Interconnect Coatings

Investigation of MnCu0.5Co1.5O4 spinel coated SUS430 interconnect alloy for preventing chromium vaporization in intermediate temperature solid oxide fuel cell

Characterization of La0.8Sr0.2Co0.5Mn0.5O3-δ Coating on Alloy Interconnect in SOFC

Progress in SOFC Metallic Interconnect Coating

Mn 1.4 Co 1.4 Cu 0.2 O 4 spinel protective coating on ferritic stainless steels for solid oxide fuel cell interconnect applications

Cu doped Mn-Co spinel protective coating on ferritic stainless steels for SOFC interconnect applications

Oxidation behavior of Cu-doped MnCo 2 O 4 spinel coating on ferritic stainless steels for solid oxide fuel cell interconnects

Cu-Fe spinel coating as oxidation barrier for Fe-16Cr metallic interconnect in solid oxide fuel cells

The Effect of Manganese and Cobalt Doping on Chromium Deposition at Pt/YSZ Cathode Interfaces

Supersonic spray derived Cu–Co oxide coating on SUS441 to protect the metallic interconnect and to increase stability of SOFC cathode

Novel coatings for stainless steel interconnects utilized in SOFCs

An investigation of Cr vaporization from SUS430 metallic interconnect and deposition on (La,Sr)MnO 3 cathode of intermediate temperature solid oxide fuel cells

Development of Coating Materials on Alloy Interconnect in Solid Oxide Fuel Cell

Cyclic oxidation of Mn–Co spinel coated SUS 430 alloy in the cathodic atmosphere of solid oxide fuel cells

Comparison of iron and copper doped manganese cobalt spinel oxides as protective coatings for solid oxide fuel cell interconnects

High-entropy FeCoNiMnCu alloy coating on ferritic stainless steel for solid oxide fuel cell interconnects