Abstract:The dual-cylinder opposed linear compressor (DOLC) contains a couple of symmetrical gas loads on the two sides of the movement components. Because the gas loads are symmetrical, the balanced position of movement components will not be offset by gas force during the operating process, and piston displacement can be detected and controlled more easily. Based on the kinetics and thermodynamics theory, the non-linear gas load of the DOLC was linearized by the Fourier method. The relationship between the supply voltage and displacement is presented. Through air compression experiments, the operation features of the DOLC with different syntonic spring groups were analyzed. The performance of the DOLC was considerably affected by work conditions and the stiffness of syntonic spring groups; the closer the work condition was to the sympathetic vibration, the higher the observed efficiency of the DOLC. A jump, hysteresis, and an unstable phenomenon in the process of voltage regulation occurred around sympathetic vibration conditions. In the process of increasing voltage on a certain discharge pressure condition, the displacement jump phenomenon occurred when the intrinsic frequency approacheds power frequency, causing the discharge pressure to drop synchronously. In the process of decreasing voltage on the lower discharge pressure condition, the displacement shrink phenomenon occurred when the intrinsic frequency approached power frequency. Because sympathetic vibration conditions changed with discharge pressures, a hysteresis district existed between the displacement jump point and shrink point. The DOLC worked unstably on the hysteresis district because the discharge pressure fluctuated between the two values. To make the DOLC work stably on higher efficiency, the intrinsic frequency should be configured to a slightly larger value than the power frequency by setting the syntonic spring groups and the mass of movement components to the ratings on the work conditions. Controlling the power frequency after is needed to adhere to the intrinsic frequency of the variable work conditions.

Performance Characteristics Around the TDC of Linear Compressor Based on Whole-Process Simulation

Design and Test on Moving-Magnet Linear Compressor

Experimental Investigation and Performance Analysis of a Dual-Cylinder Opposed Linear Compressor

Performance Simulation Analysis of a Novel Dual-piston Two-Stage Carbon Dioxide Linear Compressor

Experimental Investigation on the Steady-State Performance and Piston Stroke Length Control of A Variable Displacement Wobble Plate Compressor

Dynamic behavior analysis of a moving coil oil-free linear compressor in refrigeration system

Theoretical and Experimental Study for the Transient Behavior of a Linear Compressor During Pulse Tube Cryocooler Cool Down Process

Experimental investigation and numerical simulation on the hysteresis zone of a variable displacement wobble plate compressor

On-Line Discharge Capacity Detection For Linear Compressor

Operational optimisation of a novel dual-piston linear compressor: Simulation and experiment

Experimental Study on Dynamics Characteristics of Moving-magnet Linear Compressor

Performance Testing of Linear Compressors with Rc Approach

Theoretical and Experimental Investigations on the Piston Offset Characteristics in a Four-Stage DC Linear Compressor Unit for a 1.8 K Hybrid Cryocooler

Simulation of Dynamic Characteristics of Moving Magnet Linear Compressor for Refrigerator

Performance testing with RC load approach in linear compressors

Acoustic Impedance Characteristics of Linear Compressors

Study on stroke unstable fluctuation of linear compressor and start-up control optimization with frequency tracking

Effects of the Driving Voltage Waveform on the Performance of Vapor Compression Cycle System Driven by the Moving Coil Oil-Free Linear Compressor

Self-Sencing Control Research on a Linear Compressor

Experimental study of DC excitation effect on the performance of moving coil linear compressor

Study on the Stroke Amplitude of the Linear Compressor