Abstract:Due to the eccentric load of parallel manipulator, dynamic coupling occurs between the various degrees of freedom. As a typical parallel mechanism, the dynamic model of redundant shaking table is built. Coupling force observaction based on coupling model is introduced to the DoFs control structure. The coupling forces are controlled as disturbance forces on hydraulic system by distributing it to each actuator through Jacobi matrix transformation. Decoupling control is given based on the dynamic model as well as a feed forward disturbance force compensation control strategy. However, due to the fact that differentiating acceleration which contains large noise is needed in decoupling control based on dynamic model, modal decoupling control is given. Modal equation of redundant shaking table is given by considering hydraulic cylinder as a hydraulic spring. Through standard modal matrix and its inverse matrix, the redundant shaking table is controlled in non-coupling modal space instead of DoFs space. By analyzing the relationship between the modal matrix and the coupling characteristics of different modal DoFs, an experimental method is given for determining the modal matrix. Simulation analysis shows that compared with decoupling control based on dynamic model, the modal space decoupling control can more effectively reduce the dynamic coupling among DoFs of the redundant shaking table. A control system of the redundant shaking table is developed using rapid control prototyping technology based on xPC Target. Detailed experimental analysis and research are carried out on the proposed coupling characteristic analysis and decoupling control strategies. Experimental results demonstrate that the proposed decoupling control strategies are effective and advanced.

Modal Space Decoupled Optimal Design for a Class of Symmetric Spatial Parallel Mechanisms with Consideration of Passive Joint Damping

Control Strategy of Modal Space for a Hydraulically-Driven Stewart Platform Considering Passive Joint Damping

Non-linear joint dynamics and controls of jointed flexible structures with active and viscoelastic joint actuators

Dynamic Coupling Analysis Of A Spatial 6-Dof Electro-Hydraulic Parallel Manipulator Using A Modal Decoupling Method

Dynamic Modeling and Design for the Parallel Mechanism of a Hybrid Type Parallel Kinematic Machine

Dynamic Analysis Of An Over-Constrained Parallel Mechanism With The Principle Of Virtual Work

Local Modal Space Control Design for a 6-DOF Parallel Manipulator

Modal control of a hydraulically driven redundant actuated fully parallel mechanism

Dynamic Model of a 6-DOF Parallel Mechanism with Hooke's Joints at Both Chain Ends

Force/Motion Transmissibility Analysis of Six Degree of Freedom Parallel Mechanisms

Study on the Modal Analysis for 6-DOF Parallel Platform

Dynamics Decoupling Control Of Parallel Manipulator

On Passive Limbs in the Design of Parallel Mechanisms

Modular Dynamic Modeling and Analysis of Planar Closed-Loop Mechanisms with Clearance Joints and Flexible Links

Design and Stiffness Analysis of a Class of 2-Dof Tendon Driven Parallel Kinematics Mechanism

Kinetostatic and Dynamic Analyses of Planar Compliant Mechanisms Via a Two-Port Dynamic Stiffness Model

Modal Loss Factor Predication in Flexible Mechanism Systems with Constrain Viscoelastic Layers

Joint Dynamic Analysis of Space Manipulator with Planetary Gear Train Transmission

Modal Space Three-State Feedback Control for Electro-Hydraulic Servo Plane Redundant Driving Mechanism with Eccentric Load Decoupling.

Enumeration and optimum design of a class of translational parallel mechanisms with prismatic and parallelogram joints

Analysis and Optimization of a Vibration Isolation Platform Based on 6-DOF Parallel Mechanism