Abstract:The vapor-box is a liquid metal based design to cope with the demanding conditions of the divertor. This design relies on the recirculation of lithium by evaporation and condensation. An issue to this approach is the safety risks of Li-D/T formation and co-deposition on both the vapor-box walls - leading to possible recirculation impedance- and on the first wall leading to unacceptable tritium retention. Additively manufactured tungsten Capillary Porous Structure (CPS) samples filled with Li were exposed to high heat flux D plasmas in the linear plasma device Magnum-PSI and Li-D co-deposition was measured as a function of substrate temperature, estimated to be in the range 200-428 C and distance between 25-85 mm to the plasma beam center. The D:Li ratio was determined via in-situ ion beam diagnostics (NRA and EBS) and the spectra analyzed simultaneously to maximise the precision of the measurement. The experimental results approach close to the theoretical maximum at 40:60 D:Li ratio and the thickness of the deposited films was 0.02 - 3.2 m. For witness plate temperatures above 400 C Li films under 150 nm in thickness were deposited and show lower D:Li ratios, as low as 5:95 D:Li ratio. At these temperatures the evaporation rate from the WPs is close to the deposition rate, and the decomposition pressure for LiD becomes comparable to the operational pressure in the vessel during the discharge. SOLPS-ITER simulations were also conducted to complement the experimental data. The results were used to narrow the range of CPS surface temperature to between ^{\circ} ^{+} ^{+} \%$, which matches well with the value determined from a quartz crystal microbalance. Due to limitations in the modeling of neutral interactions with Li coated surfaces, the SOLPS-ITER modeling does not well recreate the observed Li and D deposition layers on the WPs, indicating that this aspect of the modeling in Eirene needs improvement to accurately model plasmas containing significant quantities of Li. However, SOLPS-ITER simulations should be extended to include LiD molecules and improve the accuracy of heat flux towards the target to improve the comparison with experimental data.

Excess Heat Production in a Deuterium/Palladium Gas-Solid System

Anomalous Heat Induced by Deuterium Flux in a Bunch of Long-Thin Palladium Tubes Using PID Method for Calorimetry

Anomalous heat flow and its correlation with deuterium flux in a gas-loading deuterium-palladium system

“ EXCESS HEAT ” AND “ HEAT AFTER DEATH ” IN A GAS-LOADING HYDROGEN / PALLADIUM SYSTEM

Correlation between abnormal deuterium flux and heat flow in a D/Pd system

An Explanation for the Abnormal Temperature Rise of Palladium Cathode During Electrochemical Deuterium Charging

Nuclear products and transmutation in a gas-loading D/PD and H/PD system

Effects Of D/Pd Ratio And Cathode Pretreatments On Excess Heat In Closed Pdid2o+D2so4 Electrolytic Cells

Effects of D/Pd Ratio and Cathode Pretreatments on Excess Heat in Closed Pd|D2O+D2SO4 Electrolytic Cells

Temperature Dependence of Excess Power in Both Electrolysis and Gas-loading Experiments

On the detection of alpha emission from a low-voltage DC deuterium discharge with palladium electrodes

Blistering Behavior and Deuterium Retention in Tungsten Vanadium Alloys Exposed to Deuterium Plasma in the Linear Plasma Device STEP

EVOLUTION OF HYDROGEN (DEUTERIUM) IN PALLADUIM HYDROGEN (DEUTERIUM) SYSTEM AND THE DISTRIBUTION OF HYDROGEN NEAR THE SURFACE

Deuterium Blistering in Tungsten and Tungsten Vanadium Alloys

Wave nature of deuterium flux permeating through palladium thin film with nanometer coating layers --- ( II ) theoretical modeling

Deuterium retention in co-deposition with lithium in Magnum-PSI: experimental analysis and comparison with SOLPS-ITER

Experimental and theoretical validation for transmutation of palladium at electrochemical interfaces

Comparing deuterium retention in heavy ion damaged tungsten measured by glow discharge optical emission spectroscopy, nuclear reaction analysis and thermal desorption spectroscopy

Indication of anomalous heat energy production in a reactor device

Evolution of helium bubbles induced by helium irradiation in polycrystalline palladium: An insight into tritium aging

Effect of potassium doping and exposure temperature on the deuterium behavior in large-scale potassium-doped tungsten