Abstract:Dual-fuel (DF) combustion strategies with low-carbon fuels are attractive for the shipping industry because of their better economy and lesser emissions. However, DF ignition process is highly complex and difficult to control due to its strong sensitivities to mixture-states. As such, a comprehensive numerical study was conducted to investigate the influence of thermodynamic states, ambient-fuel reactivity and micro-mixing process on the autoignition characteristics of DF mixtures (methane/n-heptane and methanol/n-heptane) under marine engine-relevant conditions. A novel parameter-sensitivity evaluation method by log-log definition was firstly proposed to quantify the ignition-delay-time (IDT) dependence on thermodynamic trajectory and charge reactivity, based on a newly detailed kinetic model (NUIGMech1.1). It was found that the methanol-addition has a larger impact on IDTs than methane, and also exhibits ignition-promoting behaviors at high temperatures. Besides, the IDT displays a higher sensitivity to temperature under methanol/air atmosphere but a higher sensitivity to pressure under methane/air atmosphere, suggesting that methane/diesel DF engines are prone to occur cycle-to-cycle variations under diesel pilot-ignition (DPI) mode while methanol/diesel DF engines exist the larger cycle variations under reactivity-controlled compression-ignition (RCCI) mode. There are small IDT-changes for methane/n-heptane mixtures with varying phi(CH4) while large variations for methanol/n-heptane as varying phi(CH3OH). Moreover, methanol shows the more significant chemical-effect on ignition. The mixture fraction of methanol-based blends with the shortest IDT, defined as the most-reactive mixture fraction (Z(MR)), is larger than that of methane at a given temperature. This demonstrates that the mixing degree (the high-reactivity fuel to low-reactivity fuel ratio) plays an important role in controlling the ignition. The mixing-time is also critical for ignition behavior of fuels, and autoignition of methanol/n-heptane blends exhibits higher sensitivity to mixing rates than methane/n-heptane. Therefore, adjusting injection parameters could tailor mixing-trajectories to offset changes in fuel autoignition chemistry. Additional reaction sensitivity analyses demonstrate that the OH radicals play a key role in the whole system reactivity at low temperatures, while HO2 becomes more important at intermediate-temperatures and CH3OH + OH <=> CH2OH + H2O displays the highest ignition-inhibition. Significantly, CH3OH + HO2 <=> CH2OH + H2O2 shows a high promoting effect on IDTs at high temperatures, resulting in the IDT-reduction.

Characteristic Analysis in Combustion Process of Marine Dual Fuel Engine

Three-Dimensional Computational Fluid Dynamics Modeling of the Combustion Process of a MAN L21/31 Marine Diesel Engine

Research on Performance Matching of Intake and Exhaust Ports of Marine Medium Speed Dual Fuel Engine

Characterizing Two-Stage Combustion Process in a Natural Gas Spark Ignition Engine Based on Multi-Wiebe Function Model

Numerical Simulation of Marine Diesel Ignited Natural Gas Engine Based on the Finite Volume Method

A Numerical Investigation on the Effects of Intake Swirl and Mixture Stratification on Combustion Characteristics in a Natural-Gas/Diesel Dual-Fuel Marine Engine

Effect of Different Combustion Models and Alternative Fuels on Two-Stroke Marine Diesel Engine Performance

Numerical Investigation on Mixing Characteristics and Mechanism of Natural Gas/Air in a Super-Large-Bore Dual-Fuel Marine Engine

Numerical Analysis of Dual Fuel Combustion in a Medium Speed Marine Engine Supplied with Methane/Hydrogen Blends

Numerical Simulation of a Large Bore Dual Fuel Marine Engine Using Tabulated Detailed Reaction Mechanisms

Implementation and Parameter Analysis of the Knock Phenomenon of a Marine Dual-Fuel Engine Based on a Two-Zone Combustion Model

New development in the combustion model of compression ignition dual fuel engine

Study on the Emission Characteristics in Renewable Energy Combustion under Different Working Conditions of Marine Two-Stroke Diesel Engine

Development of a multi-component surrogate fuel model of marine diesel engine

Numerical investigations on charge motion and combustion of natural gas-enhanced ammonia in marine pre-chamber lean-burn engine with dual-fuel combustion system

Simulation and Analysis of Hydrogen-fueled Engine Combustion

Numerical investigation on knock characteristics and mechanism of large-bore natural gas dual-fuel marine engine

Numerical Study of the Effect of Direct-Injection Timing of Methanol and Excess Air Ratio on the Combustion Characteristics of a Marine Diesel-Methanol Dual-Fuel Engine

Parametric Study on Dual-Fuel Ignition Characteristics under Marine Engine-Relevant Conditions

Simulation Data for Similarity of Spray Combustion Processes in Marine Low-Speed Diesel Engines

Optimization of direct injection mixture formation for dual-fuel low speed marine engine using novel compound electric gas injection devices