Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The accuracy of machining can be predicted during the design process of CNC machine tools, while the prediction accuracy depends on the prediction model. However, when establishing the prediction model, the coupling effect among the machine tool's different components is always ignored for modeling efficiency, so this will lead to its reliability cannot be guaranteed. To address this problem, the model reduction theory and the lumped parameter method are used in this study to set the state-space equations of the essential structural parts. Moreover, the electro-mechanical coupling parameter equation of the servo system is transformed into a state-space equation. Then the state-space equations of the components and the servo system are coupled to establish the machine tool dynamic model. Furthermore, a theoretical model of instantaneous undeformed chip thickness is found, and according to the linear relationship between the micro-cutting force and the instantaneous undeformed chip thickness, the instantaneous cutting force model of the cylindrical milling cutter is established. Based on these, the integrated model, which considers the mechanical structure, control system and cutting force, is obtained and further used in Simulink to build the machining accuracy prediction platform, as well as the accuracy of the integrated prediction model is verified. Moreover, the prediction model established by the integrated modeling method can effectively simulate the actual machining conditions of the machine tool, and the superiority of prediction is confirmed by comparing the simulated and measured results in peripheral milling applications. The results show the error in the system response efficiency is 14.8%, while the error in position accuracy and delay characteristics is less than 10%, the error between the predicted size of the prediction model and the actual size is within 28 μm, a minimum prediction error is 7 μm.

Research on PID Control Model for Error Compensation in Milling Thin-Wall Parts

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

The Reserch on PID Control Modle of the Components Working Accuracy for Slender Shaft on the NC Lathe

Support Vector Machines-Based Method for Machining Error Prediction Modeling

Research on Control Method for Machining Non-Cylinder Pin Hole of Piston

Error Analysis and Compensation Method for Motion Errors of NC Machine Tools under Cutting Loads

Research on New Software Compensation Method of Static and Quasi-Static Errors for Precision Motion Controller

Modeling and compensation of comprehensive errors for thin-walled parts machining based on on-machine measurement

Study on Workpiece Machining Precision Pid Control Model in Closed-Loop Manufacturing Systems

Position-independent Thermal Error Compensation and Evaluation Based on Linear Correlation Filtering Technology

Research on the Error Measurement and Error Compensation Technology for CNC Machine Tools

Influence of Tool Assembly Error on Machined Surface in Peripheral Milling Process

Develop on Feed-Forward Real Time Compensation Control System for Movement Error in CNC Machining

A review on error generation and control in efficient precision machining of thin-walled parts

An Integrated Model Based Prediction of Machining Accuracy for Milling Machine

Research on Compound PID Control Strategy Based on Input Feedforward and Dynamic Compensation Applied in Noncircular Turning

Machining Error Compensation Method for Thin Plate Parts Based on In-machine Measurement

The real-time error compensation technique for CNC machining systems

Error correction technique for numerical control machine tools based on the simplex method

Research on Thermal Error Compensation Technology of CNC Machine Tool Under Real Cutting Condition

Research on Application of Key Technologies of Error Compensation for CNC Machine Tools Based on Computer