Abstract:Since cross-anisotropic sand behaves differently when the loading direction or the stress state changes, the influences of the loading direction and the intermediate principal stress ratio (b = (σ2 − σ3)/(σ1 − σ3)) on the initiation of strain localization need study. According to the loading angle (angle between the major principal stress direction and the normal of bedding plane), a 3D non-coaxial non-associated elasto-plasticity hardening model was proposed by modifying Lode angle formulation of the Mohr–Coulomb yield function and the stress–dilatancy function. By using bifurcation analysis, the model was used to predict the initiation of strain localization under plane strain and true triaxial conditions. The predictions of the plane strain tests show that the major principal strain at the bifurcation points increases with the loading angle, while the stress ratio decreases with the loading angle. According to the loading angle and the intermediate principal stress ratio, the true triaxial tests were analyzed in three sectors. The stress–strain behavior and the volumetric strain in each sector can be well captured by the proposed model. Strain localization occurs in most b value conditions in all three sectors except for those which are close to triaxial compression condition (b = 0). The difference between the peak shear strength corresponding to the strain localization and the ultimate shear strength corresponding to plastic limit becomes obvious when the b value is near 0.4. The influence of bifurcation on the shear strength becomes weak when the loading direction changes from perpendicular to the bedding plane to parallel. The bifurcation analysis based on the proposed model gives out major principal strain and peak shear strength at the initiation of strain localization; the given results are consistent with experiments.

The Critical State Constitutive Model and Strain Localization for Hostun Sand

A Multiscale Investigation of Strain Localization in Cohesionless Sand

Hypoplastic Model for Sand under Multidirectional Shearing Conditions Considering Fabric Change Effect

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

STZ-Clay: A Shear-Transformation-zone Theory Based Constitutive Model for Clay

J2-deformation-type Soil Model Coupled with State-Dependent Dilatancy and Fabric Evolution: Multiaxial Formulation and FEM Implementation

A Hypoplastic Model for Granular Soils Incorporating Anisotropic Critical State Theory

Constitutive Modeling of Physical Properties of Coastal Sand During Tunneling Construction Disturbance

Analysis of Strain Localization in Porous Media with Transversely Isotropic Elasticity under Undrained Conditions

A thermodynamic critical state model for sands

Constitutive modeling of soil-structure interface through the concept of critical state soil mechanics

On strain localization of aeolian sand in true triaxial apparatus

Constitutive Model for Sand Considering the Variation of Its Physical State

A Model for Athermal Strain Localization in Dry Sheared Fault Gouge

A State-Dependent Constitutive Model for Coarse-Grained Gassy Soil and Its Application in Slope Instability Modelling

Influences of loading direction and intermediate principal stress ratio on the initiation of strain localization in cross-anisotropic sand

Formula for inclination angle of shear band based on soil state and microscopic characteristics in sands

Moving Critical and Phase-Transformation Stress State Lines of Saturated Sand During Undrained Cyclic Shear

Critical State for Anisotropic Granular Materials: A Discrete Element Perspective

A unified monotonic model for sand based on modified hyperbolic equation and state-dependent dilatancy

Constitutive model for soil with strain-softening behavior and its application in boundary value problems