Abstract:Active mounting systems have become more prevalent in recent years to effectively mitigate structure-induced vibration across the automobile chassis. This trend is particularly evident in engine mounts. Considerable research has been dedicated to this approach owing to its potential to enhance the quietness and travel comfort of automobiles. However, prior research has concentrated on a limited spectrum of specific vibrations and noise control or has been restricted to vertical vibration control. This article describes the modeling, analysis, and control of a source structure employing a multidirectional active mounting system designed to closely simulate the position and direction of an actual automobile engine mount. A piezoelectric stack actuator is connected in series to an elastic (rubber) mount to form an active mount. The calculation of the secondary force required for each active mount is achieved through the application of harmonic excitation forces. The control signal can also reduce vibrations caused by destructive interference with the input signal. Furthermore, horizontal oscillations can be mitigated by manipulating the parameters via dynamic interconnections of the source structure. We specifically examined the level of vibration reduction performance in the absence of a vertical active element operation and determined whether the control is feasible. Simulation outcomes demonstrate that this active mount, which operates in both the vertical and horizontal directions, effectively mitigates excitation vibrations. Furthermore, a simulation was conducted to mitigate the vibrations caused by complex signals (AM and FM signals) and noise. This was achieved by monitoring the system response using an adaptive filter NLMS algorithm. Adaptive filter simulations demonstrate that the control efficacy degrades in response to complex signals and noise, although the overall relaxation trend remains unchanged.

Vibration Analysis and Control of an Active Power-Train Mount System

State Space Lqg-Based Active Microvibration Control Of Micro-Manufacturing Platform

Design and Optimization on Active Engine Mounting Systems for Vibration Isolation

A Numerical Investigation on Active Engine Mounting Systems and Its Optimization

Research on Vibration Isolation of Semi-Active Controlled Hydraulic Engine Mount with Air Spring

Active Engine Vibration Isolation Using Robust Control

Analysis and optimization of power assembly mounting vibration isolation

Bidirectional active vibration control of two-dimensional structure inspired by automotive engine mounting system

Bidirectional Multi-Spectral Vibration Control: Insights from Automotive Engine Mounting Systems in Two-Dimensional Structures with a Damaged Vertical Active Element

Experimental Investigation and Vibration Control of Semi-active Hydraulic-Pneumatic Mounts for Vibratory Roller Cab

Vibration Control and Design of Vehicle Engine Mount Activated by Magnetorheological Fluid

Optimization Design of Powertrain Mounting System Considering Vibration Analysis of Multi-Excitation

Simulation of Vibration Characteristics of Semi-Active Controlled ER Fluid Engine Mounts

Fractional-Order Least-Mean-Square-Based Active Control for an Electro–Hydraulic Composite Engine Mounts

Active Damping of Torsional Vibration on the Powertrain of Power-split Vehicle

Optimization Design and Performance Analysis of Vehicle Powertrain Mounting System

Dynamic modeling and control for a three-dimensional vibration isolation system with a 3-RPC parallel mechanism

Automotive Powertrain Vibration Isolation Control Difficulties and Passive Mounting Improvement Technologies

Research on Semi-active Control of Engine Vibration Basing on Electro-Rheological(ER) Technology

Design and Development of an Active Suspension System Using Pneumatic-Muscle Actuator and Intelligent Control

A Study on the Modelling and Vibration Control of Vehicle with MR Mount