Bidirectional Multi-Spectral Vibration Control: Insights from Automotive Engine Mounting Systems in Two-Dimensional Structures with a Damaged Vertical Active Element

Dongwoo Hong,Hojoon Moon,Byeongil Kim

DOI: https://doi.org/10.3390/act13050171

IF: 2.6

2024-05-02

Actuators

Abstract:Active mounting systems have become more prevalent in recent years to effectively mitigate structure-induced vibration across the automobile chassis. This trend is particularly evident in engine mounts. Considerable research has been dedicated to this approach owing to its potential to enhance the quietness and travel comfort of automobiles. However, prior research has concentrated on a limited spectrum of specific vibrations and noise control or has been restricted to vertical vibration control. This article describes the modeling, analysis, and control of a source structure employing a multidirectional active mounting system designed to closely simulate the position and direction of an actual automobile engine mount. A piezoelectric stack actuator is connected in series to an elastic (rubber) mount to form an active mount. The calculation of the secondary force required for each active mount is achieved through the application of harmonic excitation forces. The control signal can also reduce vibrations caused by destructive interference with the input signal. Furthermore, horizontal oscillations can be mitigated by manipulating the parameters via dynamic interconnections of the source structure. We specifically examined the level of vibration reduction performance in the absence of a vertical active element operation and determined whether the control is feasible. Simulation outcomes demonstrate that this active mount, which operates in both the vertical and horizontal directions, effectively mitigates excitation vibrations. Furthermore, a simulation was conducted to mitigate the vibrations caused by complex signals (AM and FM signals) and noise. This was achieved by monitoring the system response using an adaptive filter NLMS algorithm. Adaptive filter simulations demonstrate that the control efficacy degrades in response to complex signals and noise, although the overall relaxation trend remains unchanged.

engineering, mechanical,instruments & instrumentation

What problem does this paper attempt to address?

### Problems Addressed by the Paper

This paper primarily explores how to effectively reduce vibrations in automotive engine mounting systems using bidirectional multi-spectral vibration control technology. Specifically, the research aims to address the following issues:

1. **Limitations of Existing Systems**:
- Existing passive mounting systems (such as rubber mounts) are only effective in isolating vibrations in the low-frequency range but perform poorly in the high-frequency range.
- Current research mostly focuses on specific vibration or noise control and primarily targets vertical vibration control.

2. **Vibration Control of Complex Signals**:
- The power systems (motor + reducer) of the new generation of electric and hybrid vehicles generate vibrations and noise with complex spectra, especially in the mid-to-high frequency range.
- There is a need to develop an active mounting system capable of handling both vertical and horizontal vibrations to address the vibration control of complex signals.

3. **System Modeling and Analysis**:
- Establish a two-dimensional six-degree-of-freedom model that includes an active mounting system to simulate the actual automotive engine mounting scenario.
- Evaluate whether an active mounting system in the horizontal direction alone can effectively reduce vibrations in the event of a failure of the vertical active component.

4. **Validation of Control Strategies**:
- Use adaptive filtering algorithms (such as the NLMS algorithm) to reduce vibrations caused by complex signals (amplitude-modulated signals and frequency-modulated signals) and noise.
- Validate the effectiveness of this control strategy under different input signals through simulations and analyze its performance under the influence of complex signals.

In summary, the paper aims to develop an active mounting system capable of handling both vertical and horizontal vibrations, addressing the shortcomings of traditional passive mounting systems in the high-frequency range, and improving the comfort and NVH (Noise, Vibration, and Harshness) performance of vehicles during operation.