Abstract:A micro flying slider is developed to satisfy the demands for large capacity, high data density, and fast transfer rate of mass storage systems. The air-bearing surface of the micro flying slider is designed based on micro fluid theory of hydrodynamics to obtain positive and negative pressures, thereby enhancing flying height stability. The lubrication model is investigated based on the generalized Reynolds equation. The finite volume method is utilized to solve the revised Reynolds equation that governs the air-bearing pressure and flying system behavior. The dynamic model for the slider–disk interface of the micro flying slider is developed, and the air-bearing system is modeled as a 3-degrees-of-freedom, lumped-parameter model to simulate flying characteristics. The air-bearing pressures with flying attitudes in the loading/unloading processes are characterized and calculated using the proposed model, with flying height and pitch angle as the key variables. The sample data obtained via accurate triggering and superposed averaging are processed to acquire modal frequencies and damping ratios based on the parameter identification method of modal analysis technique. System experiments are presented to illustrate the effectiveness of the proposed micro flying slider and its dynamic model for flying-height control. Theoretical analysis and experimental results show that a stable storage working process can be obtained at 1600 rpm and a pitch angle of 1.5°. Moreover, the micro flying slider exhibits satisfactory flying stability, with a near-field working distance of less than 75 nm. Good correlation between the experimental and simulation results is achieved.

Design and Analysis of a Novel Micro Flying Head in Mass Storage System

Modeling, Design and Analysis of a Micro Flying Slider in Near-Field Optical Storage System

Control System Design And Implementation Of A Partially-Self-Bearing Flywheel Energy Storage System

Design and Loss Analysis of a High Speed Flywheel Energy Storage System Based on Axial-Flux Flywheel-Rotor Electric Machines

Design and Fem Analysis of A High Efficiency Axial-Flux Brushless Dc Motor for Flywheel System

Stiffness Analysis And Levitation Force Control Of Active Magnetic Bearing For A Partially-Self-Bearing Flywheel System

Nano-and Micro-Actuations of Hard Disk’s Head Positioning System: Actuator Design and Evaluation of Performance

Research on the Design and Fabrication of Air Bearing Sliders in Hard Disk Drives

Design of a Subminiature Anti-Particles Load-Supporting Stage for Near-Field Optical Storage

FEA and Optimization of Flywheel Energy Storage System

Calculation and Analysis of Air Bearing Performance for Magnetic Head/Disks

Flyability and Durability Test of Dynamic Fly-Height Sliders at 1-Nm Clearance

Dynamic Character of Ultra Thin Film Gas lubrication for Magnetic Head/Disk

Lubrication and stability analysis of nonlinear rotor-bearing system

Analysis of Cooling Structure of Axial Flux Permanent-Magnet Synchronous Motor for Electric Aircrafts

Numerical simulation of air sliders in an ultra sub-micron flying system

Analysis and optimization of a novel energy storage flywheel for improved energy capacity

Multiphysics Fields Analysis and Optimization Design of a Novel Saucer-shaped Magnetic Suspension Flywheel Battery

Experimental Study of Head-Disk Interface Flyability and Durability at Sub-1-nm Clearance

Head Flying Characteristics in Heat Assisted Magnetic Recording Considering Various Nanoscale Heat Transfer Models

Optimum Topology Design of Sliders of High Storage Density Hard Disk