Abstract:Most design and analysis methods widely used for horizontal axis wind turbine performance prediction, such as the PROP code, are based on the traditional 2-D blade element/momentum theory (BEMT) methods, which are inadequate and underpredict the wind turbine rotor power output in the high-wind/peak-power condition, owing to effects of rotation on the wind turbine blade boundary layer. Although the deficiencies of the methods have been known for some time, this area has been neglected. The continued development of viable and well-established stall-regulated wind-turbine technology makes this research topic timely and particularly relevant to reducing the cost of wind energy. The main aim of the present paper is to describe and analyze the fundamental flow phenomena that characterize the boundary layer on rotating blades, and to develop a preliminary stall-delay model that modifies the 2-D airfoil data so as to simulate the 3-D stall-delay effects. The following steps were taken in the development of the model: 1) analysis of the 3-D integral boundarylayer equations for a reference system rotating with the blade, 2) description of the effects of rotor rotation on the separation point and its causes, and 3) determination of a simple correction formula to obtain rotating rotor lift coefficient Ci(a) and drag coefficient Cd(a) data from measured 2-D airfoil data. The preliminary 3-D stall-delay model consists of two key parameters (the ratio of local chord to local radius c/r the ratio of rotation speed to freestream velocity A) and three empirical correction factors Copyright © 1998 by the American Institute of Aeronautics and Astronautics, Inc. and the American Society of Mechanical Engineering. All rights reserved. ^Visiting Scholar. 'Assistant Professor, Senior Member AIAA. (a, b, d}. The stall-delay model is consistent with the blade element/momentum theory method and the Viterna/Tangler model, and the 3-D stall-delay model can be incorporated into the state of the art performance prediction codes, such as PROP. Through comparison with the field test data, the new model for 3-D stall-delay shows good agreement between predictions and experiments. The new model should be of great use in existing codes for horizontal axis wind turbine design and analysis.

Aeroelastic Modeling and Analysis of a Horizontal Axis Wind Turbine

MODEL ANALYSIS AND TEST RESEARCH OF HORIZONTAL-AXIAL MARINE CURRENT TURBINE

Dynamic analysis of horizontal axis wind turbine by thin-walled beam theory

Dynamic Response Analysis of the Blade of Horizontal Axis Wind Turbines

DYNAMIC STALL MODELLING OF HORIZONTAL AXIS WIND TURBINE IN YAW CONDITION

DYNAMICS MODELING OF WIND SPEED BASED ON WIND SHEAR AND TOWER SHADOW FOR WIND TURBINE

A Nonlinear Model for Aerodynamic Configuration of Wake Behind Horizontal-Axis Wind Turbine

Aeroservoelastic Simulations for Horizontal Axis Wind Turbines

DYNAMICS MODELING FOR THE BLADE OF A WIND TURBINE

Dynamics Simulation for Horizontal-Axis Wind Turbines

Influence of Wake Asymmetry on Wind Turbine Blade Aerodynamic and Aeroelastic Performance in Shear/yawed Wind

Structure Dynamic Analysis of a Horizontal Axis Wind Turbine System Using a Modal Analysis Method

Aerodynamic Performance of Wind Turbine with Horizontal Axis

A 3-D Stall-Delay Model for Horizontal Axis Wind Turbine Performance Prediction

Numerical Analysis of Aeroelastic Responses of Wind Turbine under Uniform Inflow

Transient aerodynamic load prediction of horizontal axis wind turbine based on the beddoes-leishman model

Modeling and Response of Horizontal Axis Wind Turbine Blade Based on Fluid-Structure Interaction

The influence of wind characteristic on aeroelastic stability for wind turbine blades

Numerical Investigations of Coupled Aeroelastic Performance of Wind Turbines by Elastic Actuator Line Model

The Aerodynamic Performance of Horizontal Axis Wind Turbines under Rotation Condition

An improved dynamic stall model and its effect on wind turbine fatigue load prediction