Abstract:The aim of the present paper is to study the effect of shapes of projectile nose on the ballistic resistance of 6061-T651 aluminum alloy thin plates, and to evaluate the effect of Lode angle dependent fracture criterion when predicting the ballistic resistance of 6061-T651 aluminum alloy thin plates struck by projectiles with different nose shapes through finite element (FE) simulations. To this end, the ballistic impact tests are firstly conducted using different nose shapes of projectiles. Ballistic limit velocities (BLVs) of different projectile-plate pairs considered are calculated by using initial versus residual velocity data obtained from the experiments. It can be found that the BLV of spherical projectile is the highest, followed by ogival-, blunt- and hemispherical-nosed projectiles. Subsequently, a 3D FE model corresponding to the test is built by ABAQUS/Explicit software and then they are adopted to predict the ballistic resistance of the plate. In these simulations modified Johnson-Cook (MJC) strength model accompanied with either the Lode angle independent and slightly modified Johnson-Cook (MJC) fracture criterion or the Lode angle dependent and modified Mohr-Coulomb (MMC) fracture criterion are adopted to describe plate material properties. Finally, the predicted ballistic resistance of the plates is compared with those observed in the experiments. The numerical predictions of the plate struck by different nose shapes of projectiles show that the BLV predicted by Lode angle dependent MMC fracture criterion is more accurate for spherical and ogival-nosed projectile, while the BLV predicted by Lode angle independent MJC fracture criterion is more accurate for blunt- and hemispherical-nosed projectile. In addition, the results show that the Lode angle's effect is related to the curvature radius of the nose shape of projectile, i.e., the Lode angle's effect decreases with the increase of the curvature radius.

Penetration of Aluminum Targets by Ogive-Nosed Projectiles at Oblique Angles

Oblique penetration law of short-rod projectile into thin metal target

Oblique Penetration of Spherical Projectile into Low-Carbon Steel Target: Experiment, Theory, 3D Penetration Model

Research on Oblique Penetration of Projectiles into Targets of Different Materials

Numerical Simulation Of High-Speed Projectile Oblique Penetration Into The Concrete Target

Strain-rate-dependent Cohesive Zone Modelling of Charge Damage Behavior when a Projectile Penetrates Multilayered Targets

Trajectory prediction of rigid projectile for oblique penetration into multi-layer aluminum targets

Oblique penetration of tungsten spheres against steel targets based on compressible and incompressible cavity expansion theory

Oblique penetration performance of Explosively Formed Projectile (EFP) on 6061 aluminum target:experiments and simulations

Study on Penetration of Concrete Targets by Ogive-Nose Steel Projectile

Analytical and experimental study on elliptical cross-section double-ogive-nose projectile penetration into plain concrete target

A MODEL FOR PENETRATION OF LIMITED-THICKNESS TARGETS

Experimental and numerical study on the ballistic resistance of 6061-T651 aluminum alloy thin plates struck by different nose shapes of projectiles

A Semi-Theoretical Model of Ogival Nose Rigid Projectiles Penetrating into Thick Targets

NUMERICAL SIMULATION FOR THE EFFECT OF BROADSIDE STRUCTURE ON RESISTING TRUNCATED-OGIVE NOSE PROJECTILE PENETRATION

Numerical Simulation of Rigid Projectiles Penetration into Concrete Targets with Different Warhead Shapes

Energy Absorption Characteristic of Thin Monolithic Q235 Steel Plates under Oblique Penetrating of Ogive-Nosed Projectiles

Oblique Penetration of a Circular Pipe Target by a Prefabricated Fragment

Theoretical Investigation on Failure Behavior of Ogive-Nose Projectile Subjected to Impact Loading

Effect of Lode angle and projectile diameter on the ballistic resistance of 6061-T651 aluminum alloy plates struck by hemispherical nosed projectile

Oblique Penetration of Tungsten Alloy Rod to Finite-Thickness Metal Plate