Abstract:Thin-walled cold-formed steel (CFS) structures are widely used in low-storey buildings and are seeing increased applications in multi-storey buildings as well as long-span structures. The bolted connection is one of the most common types of fasteners employed in CFS structures. The bolt slippage and load-bearing mechanism in CFS connections have a significant influence on the structural behaviour of cold-formed steel construction assemblies, which are typically numerically simulated using spring/connector elements. However, the determination of input parameters for the spring/connector elements generally requires load-deformation characteristics obtained from physical tests of lap joints, which are costly and time-consuming. Moreover, the use of spring/connector elements fails to explicitly capture the bolt bearing behaviour, resulting in inaccuracy in the simulation of CFS connections. In this paper, an accurate, efficient and robust numerical method that can fully replicate the behaviour of CFS connections considering both the effects of bolt slippage and bearing has been introduced. In the proposed numerical methodology, the cold-formed plates are modelled using the conventional shell elements, while a number of solid elements are introduced around the bolt holes, enabling the bolt-plate interaction to be explicitly accounted for, with contact pairs defined between the bolts and their surrounding solid element surfaces. The proposed numerical method could find a convergence solution using dynamic implicit solver in the general-purpose finite element (FE) software ABAQUS. Good agreement between the FE models using the proposed method and the available test results of CFS bolted connections were achieved, which sheds light on the promising application of the proposed method for simulating CFS assembled using bolted connections.

Large Lateral Deformation Analysis of Angle Steel with Double Bolt Joints

Modeling of Steel Bolted T-Stub Connection under Large Deformation Condition

Mechanical Behavior of Loose High-Strength Bolted Connections with Thin Sheet Steels

Effect of Shear Deformation in Latticed Columns on Buckling of Heavily Loaded Industrial Portal Frames

Critical Load for Shear-Induced Lateral-Distortional Buckling in I-section Steel Beams Considering Flexural Stiffness Ratio

Analytical Model for the Bond Stress-Slip Relationship of Deformed Bars in Normal Strength Concrete

Influence of Interference Fit Size on Hole Deformation and Residual Stress in Hi-Lock Bolt Insertion

Effect of Bolt Slippage on the Static Response of Lattice Structure

Anchoring effect and energy-absorbing support mechanism of large deformation bolt

Effect of bolt slippage and joint eccentricity on the response of lattice structure with non-uniform settlement

Effect of hole deformation on bolt load transfer in hybrid-bonded/bolted joints

Degradation and failure analysis of bolted joints under transverse loading

Numerical investigations on large size stiffened angle connections with different bolt patterns

An Improved and Robust Finite Element Model for Simulation of Thin-Walled Steel Bolted Connections

Bolt connection behavior and design of a four-angle assembled steel buckling-restrained brace: theoretical analysis

Finite Element Modeling of Early Stage Self-loosening of Bolted Joints

Finite Element Analysis of Bolted T-Stubs Undergoing Large Displacement: A Preliminary Study

Modeling Method for Deformation Analysis in Thick Laminate Mechanical Joints

Structural Mechanical Characteristics of a Large Bolted Beam Reaction System and Its Modified Calculation Method

Deformation Behavior at SLS of Welded I-section Steel Beams with Longitudinally Profiled Flanges

Experimental Study and Modeling of Residual Stresses of Q420 Large-Section Angles