Abstract:Azo dyes-containing wastewater can lead to environmental issues and pose threats to public health. The efficient degradation of azo dyes with novel and potent techniques, remains a challenge. This study presented an innovative utilization of micro-nano bubble aeration technology to improve the treatment of Rhodamine B through heat-activated persulfate oxidation. Through single factor experiments, the impacts of persulfate concentration, temperature, initial Rhodamine B concentration, and pH values were systematically explored on the degradation of Rhodamine B in heat-activated persulfate oxidation. The removal rate of Rhodamine B was 94.53% optimized by Response surface optimization method. The reaction rate was in the range of 0.0109–0.0528 min −1 , governed by pseudo-first-order kinetics. By applying the Arrhenius equation, the activation energy was determined to be 14.06 KJmol −1 . Furthermore, properties of micro-nano bubbles and their synergistic coefficient were investigated in heat-activated persulfate oxidation. Quenching tests revealed the predominance of sulfate radicals, and full wavelength scanning facilitated an in-depth investigation of the reaction mechanism. Additionally, a proposed electron shell structure elucidated the decomposition process of Rhodamine B. Therefore, the implementation of micro-nano bubble aeration technology based on heat-activated persulfate oxidation, held the promise as an efficient and effective approach for the treatment of printing and dyeing wastewater. In this study, the influence of a vortex finder shape with different hydraulic diameters on the pressure drop, flow pattern, and separation efficiency of a square cyclone separator was analyzed using Computational Fluid Dynamics (CFD). The considered vortex finders included square and cylindrical shapes with hydraulic diameters of 0.25, 0.5, and 0.75 times the square part hydraulic diameter of the cyclone separator. In this study, the Euler–Lagrange approach was applied to model two-phase flow inside square cyclone separators. The results demonstrated that the use of a cylindrical vortex finder increased the pressure drop and separation efficiency. Moreover, as the relative hydraulic diameter changed from 0.5 to 0.25, the pressure drop increased ten-fold, and the separation efficiency increased from 34.2 % to 83.1 % at an inlet velocity of 20 m/s and a particle diameter of 8 μm. In the cyclone separator with De/D= 0.75, employing the square vortex finder led to a decrease in the separation efficiency and an increase in the pressure drop compared to the cylindrical vortex finder because of dividing the inlet flow into two branches. Two variants of a four-blade axial impeller with diagonally rounded large-surface blades have been developed in order to reach two goals. First, the impeller should be hydrodynamically optimized for coagulation and flocculation processes (wastewater treatment), and second, the manufacturing severity and costs should be low (easily manufacturable impeller). The main process characteristics (power characteristics, blending characteristics, and hydrodynamic characteristics) of both variants of the impeller have been performed in various vessel-to-impeller configurations and the results are presented in the paper. The obtained values were compared with other standard impellers and TECHMIX hydrofoil impellers, and it was found that one of the proposed variants (4TR10) seems to be a perspective hydrofoil impeller for blending processes in the chemical, pharmaceutical, or mining industry. The coagulation/flocculation performance of the impeller has been tested and the results proved that the impeller produces the highest ratio of macroaggregates and the lowest ratio of non-aggregated particles compared to standard impellers. Advanced oxidation processes (AOPs) are highly efficient for the removal of antibiotics from water. The activation of hydrogen peroxide (H 2 O 2 ) by ultraviolet (UV) has garnered increasing attention. This study describes the enhanced photochemical degradation of emerging contaminants in water using a UV-activated calcium peroxide (UV/CaO 2 ) system, wherein CaO 2 can gently produce H 2 O 2 when exposed to UV light. The UV/CaO 2 system can expeditiously and efficiently eradicate ciprofloxacin (CIP), in which hydroxyl radicals (•OH) and superoxide anions (O 2 •- ) played critical roles. The superlative rate constant was 0.024 min −1 at an optimal dosage of 0.1 g L −1 , which was a 16-fold increase over the rate of pure UV photolysis. The UV/CaO 2 system had an excellent defluorination capacity (80% within 60 min). Further, this technology was intensely evaluated over a wide range of pH for the removal of CIP, including H< -Abstract Truncated-

Microwave-Assisted Heterogeneous Catalytic Oxidation of High-Concentration Reactive Yellow 3 with Cufe2o4/Pac

Rapid Removal of Azophloxine Via Catalytic Degradation by A Novel Heterogeneous Catalyst under Visible Light

Study on Treatment of Basic Yellow 28 dye Wastewater by Micro-nano Bubble Ozone Catalytic Oxidation

Microwave-Enhanced Fenton-Like System, Fe3O4/H2O2 for Rhodamine B Wastewater Degradation

Electrocatalytically enhanced Cu(II)/peroxymonosulfate (PMS) oxidation: Focus on electrically-induced sustained Cu(II)/Cu(I)/Cu(III) cycling and suppression of singlet oxygen ( 1 O 2 ) production

Mechanism of Fenton catalytic degradation of Rhodamine B induced by microwave and Fe3O4

Nano-PAA-CuCl2 Composite as Fenton-Like Reusable Catalyst to Enhanced Degrade Organic Pollutant MB/MO

Preparation of Heterogeneous Fenton Catalysts Cu-Doped MnO2 for Enhanced Degradation of Dyes in Wastewater

Heterogeneous UV-Fenton Catalytic Degradation of Dyestuff in Water with Hydroxyl-Fe Pillared Bentonite

Continuous ultrasonic ozone coupling technology-assisted control of ceramic membrane fouling coupled enhanced multiphase mixing to treat dye wastewater and CFD flow field simulation

Microwave-assisted co-precipitation preparation of CuFe 2 O 4 photo-Fenton degradation tetracycline: Characterization, efficacy, stability in complex water quality and mechanism

Cuprous-mediated peroxymonosulfate activation for Fenton-like removal of micropollutants: The function of co-catalyst and the accelerated degradation mechanism

Degradation of Methyl Orange Solution by Microwave-Assisted Catalysis of H2o2 with Chromium Residue

Catalytic Ozonation of Reactive Red 195 in Aqueous Solution over a Cobalt/Aluminum Oxide-Ceria Catalyst

Research on ultrafast catalytic degradation of heterocyclic compounds by the novel high entropy catalyst

Magnetic Fe 3 O 4 nanoparticles supported on carbonized corncob as heterogeneous Fenton catalyst for efficient degradation of methyl orange

Enhanced treatment of azo dyes in wastewater using heat-activated persulfate with micro-nano bubble aeration

Ultrafast degradation of organic pollutants in an Fe3O4-CoS2-x activated persulfate catalytic system with an Fe-Co catalytic cycle involving oxygen and sulfur vacancies

Efficient degradation of tetracycline hydrochloride by activated peroxymonosulfate with PdO/CuFe 2 O 4 /coal-bearing strata kaolinite composite

3D flower-like CuO@NiAl-LDH microsphere with enhanced removal affinity to organic dyes: Mechanistic insights, DFT calculations and toxicity assessment

Magnetic CuFe2O4 Nanoparticles Immobilized on Mesoporous Alumina As Highly Efficient Peroxymonosulfate Activator for Enhanced Degradation of Tetracycline Hydrochloride