Fractal and multifractal analysis on pore structure in cement paste

Yun Gao,Jinyang Jiang,Geert De Schutter,Guang Ye,Wei Sun

DOI: https://doi.org/10.1016/j.conbuildmat.2014.07.065

IF: 7.4

2014-01-01

Construction and Building Materials

Abstract:•We perform fractal and multifractal analysis on cement paste.•The fractal dimension depends linearly on porosity.•The multifractal spectrum accounts for more structural details.

What problem does this paper attempt to address?

Limited fractal behavior in cement paste upon mercury intrusion porosimetry test: Analysis and models

Yun Gao,Kai Wu,Qiang Yuan

DOI: https://doi.org/10.1016/j.conbuildmat.2020.122231

IF: 7.4

2021-03-01

Construction and Building Materials

Abstract:<p>The fractal nature of cement paste has been discussed a lot in recent decades. Most of studies are concentrated on ordinary fractal dimension of a complete fractality, while an incomplete or limited fractality is exhibited in fact. This paper presents some results towards a comprehensive understanding about the limited fractal behavior in cement paste upon the mercury intrusion porosimetry test. To that end, two modules of analysis are adopted, i.e., the ordinary fractal and the multiscale fractal. Moreover, ordinary and multiscale fractal models are introduced to simulate pore structure, and pore size distributions are compared among ordinary fractal model, multiscale fractal model and test. Results indicate that multiscale fractal provides a much richer and preciser way than ordinary fractal to describe the limited fractal behavior in cement paste even it may deviate far from perfect fractaltiy.</p>

construction & building technology,materials science, multidisciplinary,engineering, civil
Segmented Fractal Pore Structure in Cement-Based Materials Blended with Dolomite Powder

Xin Zhang,Yongqi Wei,Junqing Zuo,Yu Luo,Boyuan Wang,Wu Yao

DOI: https://doi.org/10.1061/(asce)mt.1943-5533.0003944

IF: 3.2

2021-09-04

Journal of Materials in Civil Engineering

Abstract:The macroscopic property of cement-based materials depends on their pore structure. Due to the complex and disordered pore structure of cement-based materials, traditional parameters like porosity and mean distribution radius are not accurate enough for strength predictions. Fractal geometry was employed to characterize the complexity of pore structure more accurately than existing parameters, especially the scale-dependent fractal properties, which are more dependent on the pore ranges. In this study, the pore size range of cement-based materials containing dolomite powder was regularly segmented to characterize the scale-dependent fractal nature of the pore structure. The relationship between the segmented fractal dimension and the compressive strength was discussed. Results based on the mercury intrusion porosimetry (MIP) and mechanical property tests showed that the difference existed in the relationship between segmented fractal dimension and dolomite powder content under various pore ranges. The relationships between compressive strength and fractal dimension of gel pores and fractal dimension of large pores presented positive and negative linear function, respectively. The strength equations expressed in terms of the segmented fractal dimension were proposed. Regression analysis proved that the equations in this study had high prediction accuracy.

construction & building technology,materials science, multidisciplinary,engineering, civil
FRACTAL ANALYSIS OF STRESS-DEPENDENT DIFFUSIVITY OF POROUS CEMENTITIOUS MATERIALS

Qiang Zeng,Nidu Jike,Jiahan Liu,Zhendi Wang,Jiyang Wang

DOI: https://doi.org/10.1142/s0218348x20501170

2020-01-01

Fractals

Abstract:The understanding of the diffusion process and mechanisms of harmful species (e.g. chlorides) in porous cementitious materials is important to control and improve the material durability under harsh environments. In this paper, fractal analysis on the pore structure of porous cementitious materials was conducted and involved in a diffusion model. Macro material geometric parameters were considered in the model to avoid the difficulties in the measurements of microscopic pore parameters. The deformations of porous cementitious materials under the uniaxial elastic loads were considered to correct the diffusion model. The stress-affected diffusivity was displayed in an elegant expression involving some macro material parameters (e.g. total porosity, elastic modulus of solid skeleton, Poisson ratio). Results show that the effective diffusivity is greatly influenced by the porosity and stress ratio. The uniaxial elastic loads decrease the pore areas but increase the lengths of the pore channels for mass diffusion, which eventually causes the decrease of the effective diffusivity. The plots of the relative diffusivity against the stress ratio follow linear forms. The developed fractal diffusion model may help better understand the diffusion process in complex porous cementitious materials under elastic loads. Going beyond this, the fractal diffusion model may provide a new tool to predict the diffusivity of porous building materials under complex mechanical and environmental loads.
Fractal analysis of pore structures in graphene oxide-carbon nanotube based cementitious pastes under different ultrasonication

Yuan Gao,Hongwen Jing,Zefu Zhou

DOI: https://doi.org/10.1515/ntrev-2019-0010

2019-07-12

Nanotechnology Reviews

Abstract:Abstract Nano cement additive using a hybrid of graphene oxide (GO) and multi-walled carbon nanotubes (MWCNTs) combines the excellent affinity of GO and the superior mechanical properties of MWCNTs. Ultrasonication is the key process to disperse the GO/MWCNTs and further optimizes the pore structures of cement-based pastes. Fractal dimension can effectively and quantitatively characterize the pore structures of cementitious composites. The present study investigates the fractal dimensions of pore structures of GO/MWCNT-OPC pastes under power- and time-controlled ultrasonication based on the mercury intrusion porosimetry (MIP) tests data. The finding of this study shows that comparing to calculating the fractal dimension of the overall pore size range, assessing the variations of fractal dimension of individual pore size range is more effective in evaluating the pore characteristic. The fractal dimension of larger capillary pores $$\left( {{D}_{>{{10}^{4}}nm}} \right)$$ can be use to describe the change of pore structure of GO/MWCNT-OPC pastes under ultrasonication treatment with sufficient accuracy as higher value of $${{D}_{>{{10}^{4}}nm}}$$ indicates better pore characteristics. The fractal dimension change trend of mesopores is always opposite to that of bigger capillary pores. Modest increment in both power- and time-controlled ultrasonication seems to result in the increase of the fractal dimension of capillary pores and lead to better reinforcement effects. Prolongation of ultrasonication time slightly influences the pore structure of the specimens, while nano cement additives exposed to excess ultrasonication power fail to afford adequate reinforcing effect and finally cause the deterioration of the pore structures. The findings of this study can provide helpful information of GO/MWCNT-OPC pastes and ultrasonication treatment in the future.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Surface Fractal Analysis of Pore Structure of High-Volume Fly-Ash Cement Pastes

Qiang Zeng,Kefei Li,Teddy Fen-Chong,Patrick Dangla

DOI: https://doi.org/10.1016/j.apsusc.2010.07.061

IF: 6.7

2010-01-01

Applied Surface Science

Abstract:The surface fractal dimensions of high-volume fly-ash cement pastes are evaluated for their hardening processes on the basis of mercury intrusion porosimetry (MIP) data. Two surface fractal models are retained: Neimark's model with cylindrical pore hypothesis and Zhang's model without pore geometry assumption. From both models, the logarithm plots exhibit the scale-dependent fractal properties and three distinct fractal regions (I, II, III) are identified for the pore structures. For regions I and III, corresponding to the large (capillary) and small (C-S-H inter-granular) pore ranges respectively, the pore structure shows strong fractal property and the fractal dimensions are evaluated as 2.592–2.965 by Neimark's model and 2.487–2.695 by Zhang's model. The fractal dimension of region I increases with w/b ratio and hardening age but decreases with fly-ash content by its physical filling effect; the fractal dimension of region III does not evolve much with these factors. The region II of pore size range, corresponding to small capillary pores, turns out to be a transition region and show no clear fractal properties. The range of this region is much influenced by fly-ash content in the pastes. Finally, the correlation between the obtained fractal dimensions and pore structure evolution is discussed in depth.
Investigation and Application of Fractal Theory in Cement-Based Materials: A Review

Lei Wang,Xiaoman Zeng,Huamei Yang,Xingdong Lv,Fanxing Guo,Yan Shi,Asad Hanif

DOI: https://doi.org/10.3390/fractalfract5040247

IF: 3.577

2021-12-01

Fractal and Fractional

Abstract:Cement-based materials, including cement and concrete, are the most widely used construction materials in the world. In recent years, the investigation and application of fractal theory in cement-based materials have attracted a large amount of attention worldwide. The microstructures of cement-based materials, such as the pore structures, the mesostructures, such as air voids, and the morphological features of powders, as well as the fracture surfaces and cracks, commonly present extremely complex and irregular characteristics that are difficult to describe in terms of geometry but that can be studied by fractal theory. This paper summarizes the latest progress in the investigation and application of fractal theory in cement-based materials. Firstly, this paper summarizes the principles and classification of the seven fractal dimensions commonly used in cement-based materials. These fractal dimensions have different physical meanings since they are obtained from various testing techniques and fractal models. Then, the testing techniques and fractal models for testing and calculating these fractal dimensions are introduced and analyzed individually, such as the mercury intrusion porosimeter (MIP), nitrogen adsorption/desorption (NAD), and Zhang’s model, Neimark’s model, etc. Finally, the applications of these fractal dimensions in investigating the macroproperties of cement-based materials are summarized and discussed. These properties mainly include the mechanical properties, volumetric stability, durability (e.g., permeability, frost and corrosion resistance), fracture mechanics, as well as the evaluation of the pozzolanic reactivity of the mineral materials and the dispersion state of the powders.

mathematics, interdisciplinary applications
Surface fractal dimension: An indicator to characterize the microstructure of cement-based porous materials

Qiang Zeng,Mingyong Luo,Xiaoyun Pang,Le Li,Kefei Li

DOI: https://doi.org/10.1016/j.apsusc.2013.05.123

IF: 6.7

2013-01-01

Applied Surface Science

Abstract:This study investigates the surface fractal dimensions (SFDs) of pore structure of cement pastes and mortars with/without ground granulated blast-furnace slag (GGBS) incorporated into binder. The samples were subject to water curing and sealed curing. The fractal dimensions of samples are determined by Zhang’s model (Ind Eng Chem Res, 34 (1995):1383–1386) on the basis of mercury intrusion porosimetry (MIP) data. The results confirm the scale-dependent property of fractal dimension of pore structures and the micro-fractal, transition and macro-fractal regions are identified for all samples. The upper pore size range for micro-fractal regions is around 30nm, the transition regions cover 0.5–2 magnitude orders of pore size and macro fractal regions cover 1.5–3 magnitude orders. Both curing conditions and GGBS in binder have impact on the fractal properties of pore structure, and samples incorporating GGBS have substantially larger values for micro-fractal regions.
Fractal Characteristics of the Pore Structure of Coral Powder–Cement Slurry under Different Fractal Models

Qingshan Meng,Qinglong Qin,Huamei Yang,Haoran Zhou,Kai Wu,Lei Wang

DOI: https://doi.org/10.3390/fractalfract6030145

IF: 3.577

2022-03-04

Fractal and Fractional

Abstract:In this study, coral powder with different contents and levels of fineness were incorporated into cement; then, the pore structure of a coral powder–cement slurry was measured using the MIP test at days 3 days and 28, respectively. Neimark’s model, Ji’s model, and Pfeifer and Avnir’s model were also used to analyze the fractal characteristics of the coral powder–cement slurry. The results show that the coral powder–cement slurry has multifractal characteristics when using Neimark’s model, and the entire pore size range of the cement slurry can be divided into three parts: Region I (1–200 μm), Region II (70 nm–4 μm), and Region III (5–500 nm). The pore surface fractal dimension of both Regions I and III is less than 3, while that of Region II is greater than 3. This indicates that Regions I and III have obvious fractal characteristics, which Region II does not. Meanwhile, the pore surface fractal dimension of Region I is positively correlated with hydration age, while the pore surface fractal dimension of Region III is less affected by hydration age and coral powder contents. Ji’s model reveals that coral powder–cement slurry also has multifractal characteristics, but the entire pore size range of the cement slurry can be divided into two parts: Region I (5.482 nm–500 m) and Region II (120 nm–370 μm). The pore volume fractal dimension of Region I is greater than 2 and less than 2.5, while that of Region II is greater than 2.9 and less than 3. Therefore, both Regions I and II have fractal characteristics. In addition, the coral powder admixture, fineness, and age have large effects on the pore volume fractal dimension and pore size range of Region II. Pfeifer and Avnir’s model reveals that the entire pore size range of cement slurry can also be divided into Region I (5.482–600 nm), Region II (120 nm–10 μm), and Region III (5–365 μm), and that the pore surface fractal dimension of both Regions I and III is less than 3, while that of Region II is greater than 3. This indicates that Regions I and III have fractal characteristics, while Region II does not have fractal characteristics.

mathematics, interdisciplinary applications
Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Jun Chen,Zongjin Li,Xianyu Jin

DOI: https://doi.org/10.1016/j.conbuildmat.2017.08.046

2017-01-01

Abstract:The microstructure evolution of cement paste governs the material properties on the macrostructural level. Recently, a non-contact electrical resistivity measurement has been applied to study the pore structure evolution of early-age cement-based materials. In this study, the capillary pore tortuosity development of early-age cement paste is predicted by the non-contact electrical resistivity measurement. The results demonstrate that the capillary pore tortuosity of cement paste evolves slightly at the first few hours but begins to increase substantially at the percolation threshold of the hard core/soft shell (HCSS) particles. By coupling the predicted evolution with the HCSS model, it is found that the capillary porosity and the thickening rate of the hydration product shell increase with the increase of the water to cement (w/c) ratio. Early-age C-S-H gel is revealed to grow in a lengthened manner, and the greater is the w/c ratio, the more elongated is the C-S-H gel. The juxtaposition of the nanometre-sized elementary bricks is the hidden force for the elongated growth of C-S-H gel. It is disclosed that the initial distance between cement particles is a fundamental factor that governs the microstructure development of cement paste. The hydration of cement preferentially achieves the particle percolation, and the hydration products grow more loosely when the initial distance between cement particles is greater.
Study on Fractal Characteristics of Cracks and Pore Structure of Concrete Based on Digital Image Technology

Bei Li,Xianyu Jin,Ye Tian,An Duan,Nanguo Jin

2013-01-01

Abstract:Based on the fractal theory, this study presents a numerical analysis on the fractal characteristics of cracks and pore structure of concrete with the help of digital image technology. The results show that concrete cracks and the micro pore distribution of concrete are of fractal characteristics and the fractal dimension ranges from 1 to 2. The fractal characteristics of pores in cracked concrete and un-cracked concrete is similar and the former fractal dimension of the micro pore structure is bigger than the later.
Empirical Estimation of Pore Size Distribution in Cement, Mortar, and Concrete

Fuyuan Gong,Dawei Zhang,Evdon Sicat,Tamon Ueda

DOI: https://doi.org/10.1061/(asce)mt.1943-5533.0000945

IF: 3.2

2013-01-01

Journal of Materials in Civil Engineering

Abstract:Pore size distribution is an important factor that affects the moisture diffusion and permeability properties of cement-based materials. For cement paste, it is assumed that the mesopores (100 nm-0.01 mm) and macropores (0.01 mm-1 cm) can be neglected compared to the micropores (<100 nm). Based on the surface energy theory, moisture chemical potential of pore water is introduced to explain the liquid-gas equilibrium in pores with different radius. Using chemical potential as an intermedium, a quantitative relationship between micropore size distribution and water adsorption isotherms can be established. The micropore size distribution can be treated as an explanation of the moisture adsorption behavior, and by using adsorption isotherms, the micropore size distribution can be estimated conveniently. Mortar and concrete can be regarded as a combination of cement paste and aggregates; thus, besides the micropores, the mesopores and macropores are also taken into consideration. Finally, the general empirical estimation equations for pore-size distribution are developed for cement, mortar, and concrete, which can be used for refined modeling and simulating of durability-related issues, such as frost action, water permeability, and drying shrinkage. (C) 2014 American Society of Civil Engineers.
Pore structure characterization of cement paste by different experimental methods and its influence on permeability evaluation

Zhi-Lu Jiang,Ying-Jie Pan,Jian-Fan Lu,Yao-Cheng Wang

DOI: https://doi.org/10.1016/j.cemconres.2022.106892

IF: 11.958

2022-09-01

Cement and Concrete Research

Abstract:The permeability of cement pastes depends on their pore structures. In this paper, various indirect and direct methods were used to comprehensively reveal the microstructures; then, the permeability was predicted by the Katz-Thompson model (K-T model), pore network model, and computational fluid dynamics (CFD). The pore structure characteristics obtained from different methods were compared, which include porosity, pore size distribution (PSD), specific surface area, pore connectivity, and tortuosity. The PSD by water vapor sorption is correlated to the re-saturation of C-S-H sheets and gel pores. Furthermore, results from low-field nuclear magnetic resonance (NMR) show a finer pore structure due to swelling of C-S-H sheets during water saturation pretreatment. The permeability evaluated based on pore structures by different experimental methods is noticeably different, depending on the detected pore size ranges of the measurement greatly.

construction & building technology,materials science, multidisciplinary
Multiscale Poromechanics of Wet Cement Paste

Tingtao Zhou,Katerina Ioannidou,Franz-Josef Ulm,Martin Z. Bazant,Roland J. M. Pellenq,Roland J.M. Pellenq

DOI: https://doi.org/10.48550/arXiv.1905.11206

2019-05-21

Soft Condensed Matter

Abstract:Capillary effects such as imbibition-drying cycles impact the mechanics of granular systems over time. A multiscale poromechanics framework was applied to cement paste, that is the most common building material, experiencing broad humidity variations over the lifetime of infrastructure. First, the liquid density distribution at intermediate to high relative humidities is obtained using a lattice gas density functional method together with a realistic nano-granular model of cement hydrates. The calculated adsorption/desorption isotherms and pore size distributions are discussed and compare well to nitrogen and water experiments. The standard method for pore size distribution determination from desorption data is evaluated. Then, the integration of the Korteweg liquid stress field around each cement hydrate particle provided the capillary forces at the nanoscale. The cement mesoscale structure was relaxed under the action of the capillary forces. Local irreversible deformations of the cement nano-grains assembly were identified due to liquid-solid interactions. The spatial correlations of the nonaffine displacements extend to a few tens of nm. Finally, the Love-Weber method provided the homogenized liquid stress at the micronscale. The homogenization length coincided with the spatial correlation length nonaffine displacements. Our results on the solid response to capillary stress field suggest that the micronscale texture is not affected by mild drying, while local irreversible deformations still occur. These results pave the way towards understanding capillary phenomena induced stresses in heterogeneous porous media ranging from construction materials, hydrogels to living systems.
Influence of load and specimen shape on pore structure fractal feature of cement-based material in the carbonation reaction

Ping HAN,Jiande HAN,Shuguang WANG,Weiqing LIU

DOI: https://doi.org/10.3969/j.issn.1002-3550.2014.08.016

2014-01-01

Abstract:With MIP mercury intrusion microscopic test,a quantitative study was conducted on the pore structure with different load stress level and specimen shape before and after carbonation. The fractal dimension is larger ,means the tortuous and complex degree of pore structure are more,and harmful erosion medium is more difficulty. Based on thermodynamic fractal model ,the change of the external fractal dimension was analyzed before and after carbonation. The study reveals that the fractal dimension of thermodynamic fractal model can characterize the changes of the samples pore structures. The numerical result is between 2.0 and 2.7. Pore external fractal dimension of mortar specimen is between 2.1 and 2.5 under load. Sample,whose stress level is 0.2,the external fractal dimension under the action of tensile stress is larger than that under the action of compressive stress. However,sample,whose stress level is 0.4 and 0.6,the conclusion is opposite. On the other hand,pore external fractal dimension of cement-based specimen is between 2.0 and 2.7 for different shapes samples. Their fractal dimension values were decreased before and after carbonization ,but the fractal dimension values of massive specimens de-crease amplitude is bigger than cylindrical specimens.
Distribution of porosity surrounding a microfiber in cement paste

Shan He,Yu Chen,Minfei Liang,En-Hua Yang,Erik Schlangen

DOI: https://doi.org/10.1016/j.cemconcomp.2023.105188

IF: 9.93

2023-09-01

Cement and Concrete Composites

Abstract:This study investigates the microstructural changes of cement paste due to the inclusion of polymeric microfiber at different water-to-cement (w/c) ratios. A procedure to quantify the porosity of epoxy impregnated interfacial transition zone (ITZ) is also presented. Results show that the microstructures of the ITZ beneath and above a microfiber, with respect to the gravity direction, are largely different. Though the ITZ at both sides of the fiber are more porous than the bulk matrix, the porosity of the lower ITZ (i.e., the ITZ beneath a fiber) is significantly higher than the upper side (i.e., the ITZ above a fiber). This difference can be attributed to the combined effects of fiber on the initial packing of surrounding cement grains and on the settlement of the fresh mixture. The porosity gradients of the upper ITZs are found to be nearly identical for all the tested w/c ratios, while the porosity gradients of the lower ITZs become steeper when the w/c is higher. The lower side is also found to be the preferred location for the precipitation of calcium hydroxide crystals. Results of energy-dispersive X-ray spectroscopy (EDS) and nano-indentation analyses confirm that the chemical and mechanical properties of the ITZ are also asymmetric.

construction & building technology,materials science, composites
Study of the Relationship between the Strength of the hydrated Cement Paste with Flyash and its Pore structure

Jianfei Guo,Xianyu Jin,Jian Ma

DOI: https://doi.org/10.3969/j.issn.1003-8965.2006.02.004

2006-01-01

Abstract:In this paper the relationship between the strength of cement paste and the gel/space ratio was studied and the relevant formula derived.Gel /space ratio is considered suitable to be taken as a characteristic parameter for the strength of cement paste.The influence of gel strength and gel/space ratio on the strength of cement paste and the influence of the flyash added on the gel/space ratio and strength of cement paste are discussed.
HVFA Cement Paste's Pore Structure Experimental Analysis

Wei Sun

2000-01-01

Abstract:According to the experimental outcomes about the HVFA cement paste's micro pore structure,this article has put forward explanation and has presented a study of the regssion equation between HVFA cement paste strength and pore size distribution,this article adopts MIP method.
Experimental Study on Pore Characteristics and Fractal Dimension Calculation of Pore Structure of Aerated Concrete Block

Jun Fu,Yue Yu

DOI: https://doi.org/10.1155/2019/8043248

IF: 1.843

2019-08-08

Advances in Civil Engineering

Abstract:It is important to control and predict the macroscopic properties through pore structure parameters of cement-based materials. Microscopic pore structure of concrete has many characteristics, such as sizes and disordered distribution. It is necessary to use fractal theory to describe the pore structure of concrete. In order to establish the relationship between the pore structure characteristics of aerated concrete and porosity, shape factor, pore superficial area, average pore diameter, and average diameter, the fractal dimension of the pore structure was used to evaluate the pore structure characteristics of aerated concrete. The X-ray computed tomography (CT) images of the aerated concrete block pore structure were obtained by using the XTH320 series X-ray three-dimensional microscope. The pore characteristics of aerated concrete block were studied according to Image-Pro Plus (IPP). Based on the research of the fractal dimension measurement methods, the proposed MATLAB program automatically determined the fractal dimension of the aerated concrete block pore structure images. The research results indicated that the small pores (20 μ m∼60 μ m) of aerated concrete block account for a large percentage compared with the large pores (60 μ m∼400 μ m or more) from pore diameter distribution and the pore structure of aerated concrete block has obvious fractal features and the fractal dimension of aerated concrete block pore structure images were calculated to be in the range of 1.775–1.805. The pore fractal dimension has a strong correlation with the pore fractal characteristics of aerated concrete blocks. The fractal dimension of the pore structure linearly increases with porosity, shape factor, and pore surface area. The fractal dimension of the pore structure decreases with the average pore size and average diameter. Thus, the fractal dimension of the pore structure that is calculated by the MATLAB program based on fractal theory can be assumed as the integrative evaluation index for evaluating the pore structure characteristic of aerated concrete block.

construction & building technology,engineering, civil
Cross-Scale Study on Lime Modified Phosphogypsum Cemented Backfill by Fractal Theory

Fengwen Zhao,Jianhua Hu,Yinan Yang,Hongxing Xiao,Fengcheng Ma

DOI: https://doi.org/10.3390/min12040403

IF: 2.5

2022-03-25

Minerals

Abstract:Pore structure is a critical factor affecting the strength characteristics of mine backfill materials. In this paper, based on the mechanical tests on lime modified phosphogypsum cemented backfill (LMPGCB), the microstructure of the LMPGCB sample was characterized by nuclear magnetic resonance (NMR) and scanning electron microscopy (SEM) imaging. Based on the fractal theory (FT), the values expressing the fractal characteristics of the NMR T2 spectrum and SEM images were determined. The mathematical model between the NMR-FT fractal dimension and the SEM-FT box dimension was developed to infer the overall pore characteristics from various pore characteristics. The functional relationships between the strength and pore content and dimension were established, and the effects of pore structure on the strength were discussed. The results indicate that: (1) in NMR-FT fractal dimension, the fractal effect of various types of pores is better. The fractal dimension of the small pore is between 0.86–1.38, in which the overall trend first decreases and then increases. (2) In the SEM-FT box dimension, the fractal effect of the overall pore is better. The overall trend of box dimension decreased first and then increased at each kind of magnification. Furthermore, with the increase of magnification, the box dimension decreases. (3) There is a linear direct proportional relationship between the SEM-FT box dimension and the fractal dimensions of NMR-FT of small pores. The relationship between SEM-FT box dimension and NMR-FT fractal dimensions of various types of pores conforms to the plane relationship. There is a linearly increasing relationship between dimension and pore content and a decreasing relationship between dimension and strength.

geochemistry & geophysics,mineralogy,mining & mineral processing
Hydration and Fractal Analysis on Low-Heat Portland Cement Pastes Using Thermodynamics-Based Methods

Yifan Zhou,Wenwei Li,Yuxiang Peng,Shengwen Tang,Lei Wang,Yan Shi,Yang Li,Yang Wang,Zhicheng Geng,Kai Wu

DOI: https://doi.org/10.3390/fractalfract7080606

IF: 3.577

2023-08-06

Fractal and Fractional

Abstract:Low-heat Portland (LHP) cement is a kind of high-belite cement, which has the characteristic of low hydration heat. Currently, it is extensively used in the temperature control of mass concrete. Based on the thermodynamic database of OPC-based materials, the thermodynamic software GEM-Selektor (noted as GEMS) is used for simulating the hydration products of the LHP cement paste. Then, according to the GEMS thermodynamic simulation results, MATLAB is used to visualize the initial and ultimate stages of LHP cement pastes; the effects of curing temperature and water to cement (w/c) ratio on hydration products are addressed; and the porosity, fractal dimension, and tortuosity of different pastes are calculated. It is found that an appropriately high curing temperature is important for reducing porosity, especially in the early hydration stage. Hydration time also has a significant impact on the hydration of LHP cement paste; long hydration time may reduce the impact of temperature on hydration products. The w/c ratio is another important consideration regarding the hydration degree and porosity of LHP paste, and under different curing temperatures, hydration times, and w/c ratios, the porosity varies from 5.91–32.91%. The fractal dimension of this work agrees with the previous findings. From tortuosity analysis, it can be concluded that the high curing temperature may cause significant tortuosity, further affecting the effective diffusivity of LHP cement paste. For cement pastes with low w/c ratio, this high curing temperature effect is mainly reflected in the early hydration stage, for ones with high w/c ratio, it is in turn evident under long-term curing.

mathematics, interdisciplinary applications

Fractal and multifractal analysis on pore structure in cement paste

Limited fractal behavior in cement paste upon mercury intrusion porosimetry test: Analysis and models

Segmented Fractal Pore Structure in Cement-Based Materials Blended with Dolomite Powder

FRACTAL ANALYSIS OF STRESS-DEPENDENT DIFFUSIVITY OF POROUS CEMENTITIOUS MATERIALS

Fractal analysis of pore structures in graphene oxide-carbon nanotube based cementitious pastes under different ultrasonication

Surface Fractal Analysis of Pore Structure of High-Volume Fly-Ash Cement Pastes

Investigation and Application of Fractal Theory in Cement-Based Materials: A Review

Surface fractal dimension: An indicator to characterize the microstructure of cement-based porous materials

Fractal Characteristics of the Pore Structure of Coral Powder–Cement Slurry under Different Fractal Models

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Study on Fractal Characteristics of Cracks and Pore Structure of Concrete Based on Digital Image Technology

Empirical Estimation of Pore Size Distribution in Cement, Mortar, and Concrete

Pore structure characterization of cement paste by different experimental methods and its influence on permeability evaluation

Multiscale Poromechanics of Wet Cement Paste

Influence of load and specimen shape on pore structure fractal feature of cement-based material in the carbonation reaction

Distribution of porosity surrounding a microfiber in cement paste

Study of the Relationship between the Strength of the hydrated Cement Paste with Flyash and its Pore structure

HVFA Cement Paste's Pore Structure Experimental Analysis

Experimental Study on Pore Characteristics and Fractal Dimension Calculation of Pore Structure of Aerated Concrete Block

Cross-Scale Study on Lime Modified Phosphogypsum Cemented Backfill by Fractal Theory

Hydration and Fractal Analysis on Low-Heat Portland Cement Pastes Using Thermodynamics-Based Methods