Abstract:In the present work, an ultrahigh strength 300 M steel was treated by the surface plastic deformation with surface cryogenic grinding treatment (SCGT) technique. The SCGT was carried out by rotational grinding wheel embedded with numerous zirconium corundum abrasive grits, which contributes to a decreasing distribution of strain, strain rate and strain gradient from the treated surface to the matrix. The depth-dependent microstructural evolution was systematically evaluated from micrometer to nanoscale and in particular, the deformation mechanisms and texture alternation were addressed. It was identified that the microstructural evolution starts from the formation of dislocation structures, that is subsequently followed by the distorted microstructures featured as the origination and evolution of ultrafine laminates and ultrafine grains in the form of dislocation activities. Nanocrystalline was generated in the topmost surface region and nanoparticle precipitates induced by the SCGT process occur within a few microns of the treated surface. In SCGT, a very high strain rate of over 10(6) s(-1) and a strain gradient of over 0.2 mu m(- 1) were induced on the topmost surface of 300 M steel sample, which impels the martensite-matrix lamella extended into the elongated structure and finally transformed into the nanosized grains during processing. A dislocation slip-dominated process that was supplemented by the mechanical twinning governs the microstructural evolution pattern during the SCGT process, the nucleus of dynamic recrystallization initiated from the pre-existing dislocation cells were observed, and the transformation from martensite to austenite was effectively suppressed. The increase of grain size from nanoscale to submicron and finally microscale contributes to a decrease of microhardness by 25.6% (from 7.8 GPa at the treated surface to 5.8 GPa at a depth of over 100 mu m from the processed surface).

Surface Nanocrystallization of Ti–45Al–7Nb–0.3W Intermetallics Induced by Surface Mechanical Grinding Treatment

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

Gradient Nanotwinned Structure and Its Formation Mechanism in Inconel 625 Alloy Produced by Surface Mechanical Grinding Treatment

Surface Nanocrystallization of Mg-3 Wt.% Li-6 Wt.% Al Alloy by Surface Mechanical Attrition Treatment

Surface Nanocrystallization of Ni3Al by Surface Mechanical Attrition Treatment

Nanocrystallization and Martensitic Transformation in Fe–23.4Mn–6.5Si–5.1Cr (wt.%) Alloy by Surface Mechanical Attrition Treatment

Process parameter optimization and surface integrity evolution in the high-speed grinding of TiAl intermetallics based on grey relational analysis method

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

Grain refinement of a Ti–47Al–8Nb–2Cr alloy through heat treatments

Interdiffusion of Alloying Elements in Nanocrystalline Fe–30 Wt.% Ni Alloy During Surface Mechanical Attrition Treatment and Its Effect on Α → Γ Transformation

On the microstructural evolution pattern of 300 M steel subjected to surface cryogenic grinding treatment

Dynamic recrystallization characterization in Ti-6Al-4V machined surface layer with process-microstructure-property correlations

Surface hardening of NiTi shape memory alloy induced by the nanostructured layer after surface mechanical attrition treatment.

Surface nanocrystallization of 1Cr18Ni9Ti stainless steel induced by shear deformation

Surface morphology and gradient microstructural evolutions in pure titanium via surface severe plastic deformation

Investigation of Surface Integrity in Conventional Grinding of Ti-6Al-4V

Microstructure and Thermal Stability of Bulk Nanocrystalline Alloys Produced by Surface Mechanical Attrition Treatment

Microstructural Evolution in NiTi Alloy Subjected to Surface Mechanical Attrition Treatment and Mechanism

Grinding of Ti2AlNb intermetallics using silicon carbide and alumina abrasive wheels: Tool surface topology effect on grinding force and ground surface quality

Mechanical Nanocrystallization Surface Treatment on the Reheated 400mpa Ultrafine Grained Steel

Grain Refinement Mechanisms of TiC0.5N0.5 Nanoparticles in Aluminum