Abstract:For absorption cooling cycles using water as a refrigerant, H2O/LiCl mixtures are suitable for replacing conventional H2O/LiBr mixtures. In addition, membrane devices can be used to develop compact and lighter absorption systems, and they can operate with H2O/LiCl mixtures. The present paper describes an experimental evaluation of a membrane desorber/condenser operating at atmospheric pressure. Two operation modes were analyzed: continuous cycle operation and intermittent operation. For the first operation mode, the maximum desorption rate was 3.49 kg/h·m2, with a solution temperature of 90.3 °C and a condensation temperature of 25.1 °C. The lowest desorption rate value was 0.26 kg/h·m2, with a solution temperature of 75.4 °C and a condensation temperature of 40.1 °C. In the second mode, after three operating hours, the refrigerant fluid produced, per 1 m2 of membrane area, 7.7, 5.6, 4.3, and 2.2 kg, at solution temperatures of 90.3, 85.3, 80.4, and 75.4 °C, respectively. A one-dimension heat and mass transfer model is presented. The calculated values of desorption rate and outlet temperatures were compared with the experimental data; a square correlation coefficient of 0.9929 was reached for the desorption rate; meanwhile, for the outlet solution temperatures and the outlet cooling-water temperatures, a square correlation coefficient up to 0.9991 was achieved. The membrane desorber has the advantages of operating at atmospheric-pressure conditions, high condensation temperature, the ability to use different saline solution working mixtures, and different operation methods. These advantages can lead to new absorption systems.

A Review Of Reactant Salts For Resorption Refrigeration Systems

Permeability and Thermal Conductivity of Compact Adsorbent of Salts for Sorption Refrigeration

The Contrast Between the Water-Lithium Bromide-Lithium Nitrate and the Water-Lithium Bromide Absorption Refrigeration Cycle

Investigation of Thermal Characteristics of Strontium Chloride Composite Sorbent for Sorption Refrigeration

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

EXPERIMENTAL STUDY ON A NEW TYPE ABSORPTION REFRIGERATION SYSTEM

Preliminary study on the performance of the diffusion absorption refrigerator operating with the mixed refrigerant

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

A NOVEL COMBINED EJECTOR-ABSORPTION REFRIGERATION CYCLE

Heat Capacities of Four Promising Alternatives to Lithium Bromide Aqueous Solution in Absorption Refrigerators

Investigation on Thermal Conductive Consolidated Composite CaCl2 for Adsorption Refrigeration

APPLICATION OF REFRIGERATING MACHINE BASED ON LITHIUM BROMIDE IN CIRCULATING SYSTEM OF HAT

Experimental Study on an Absorption Refrigeration System at Low Temperatures

Feasibility Analysis on Compression-Assisted Adsorption Chiller Using Chlorides for Underground Cold Transportation

Investigations on Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Optimization Analyses on the Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

An investigation of the mixing position in the recuperators on the performance of an auto-cascade refrigerator operating with a rectifying column

A Numerical Investigation of A Diffusion Absorption Refrigerator Operating with the Binary Refrigerant for Low Temperature Applications

Integrated product selection and process optimization for cascade refrigeration system

Experimental Performance of a Membrane Desorber with a H2O/LiCl Mixture for Absorption Chiller Applications

Study Of Generator Exhaust Heat Powered Solid Adsorption Refrigeration - Indirect Evaporative Cooling Traffic Air Conditioning System