Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Forming Semiconductor/dielectric Double Layers by One-Step Spin-Coating for Enhancing the Performance of Organic Field-Effect Transistors

A Transfer Method for High‐Mobility, Bias‐Stable, and Flexible Organic Field‐Effect Transistors

Spin-Coated Crystalline Molecular Monolayers for Performance Enhancement in Organic Field-Effect Transistors

Self-assembly of semiconductor/insulator interfaces in one-step spin-coating: a versatile approach for organic field-effect transistors.

Interfacial Flat-Lying Molecular Monolayers for Performance Enhancement in Organic Field-Effect Transistors

Editorial: High-Performance Organic Thin-Film Transistors

Reduction of charge injection barrier by 1-nm contact oxide interlayer in organic field effect transistors

Unidirectional coating technology for organic field-effect transistors: materials and methods

Dry Lithography Patterning of Monolayer Flexible Field Effect Transistors by 2D Mica Stamping

Enabling Gate Dielectric Design for All Solution-Processed, High-Performance, Flexible Organic Thin-Film Transistors.

Liquid Crystal-Like Active Layer for High-Performance Organic Field-Effect Transistors

Enhanced Performances of Organic Thin Film Transistors by Dual Interfacial Modification of Dielectric Layer

Corona Poling Induced Phase Transition to Highly Polar Phase in P(VDF-TrFE-CFE) Dielectric and Charge Transport of Organic Field-Effect Transistors

High performance n-channel thin-film field-effect transistors based on angular-shaped naphthalene tetracarboxylic diimides

Polyethylene interfacial dielectric layer for organic semiconductor single crystal based field-effect transistors

Polymer Electrolyte Blend Gate Dielectrics for High-Performance Ultrathin Organic Transistors: Toward Favorable Polymer Blend Miscibility and Reliability

Interface Collaborative Strategy for High Mobility Organic Single‐Crystal Field‐Effect Transistors with Ideal Current–Voltage Curves

Epitaxial Growth of MOF Thin Film for Modifying the Dielectric Layer in Organic Field-Effect Transistors.

Controlled 2D growth of organic semiconductor crystals by suppressing “coffee-ring” effect

Improving Charge Injection for Organic Field‐Effect Transistor Array via Chemical Functionalized Van der Waals Top‐Contacts

Driving Organic Field-Effect Transistors: Enhancing Crystallization and Electrical Performance with Blends and Inkjet Printing