Abstract:This research investigated the encapsulation of Al-Si alloy phase change materials (PCMs) for efficient thermal storage at high temperature. Two strategies, the direct powder formation route and in situ powder alloying formation route, were employed successfully. In the direct powder formation route, Al-Si alloy powders were spheroidized into spheres and encapsulated within Al2O3 powder shells with the help of organic binder, which were finally sintered at high temperature, forming Al-Si@Al2O3 capsules with cavities. Isostatic pressing at 50 MPa and 200 MPa were applied to the Al-Si cores, in order to optimize the cavity size. In the in situ powder alloying formation route, Al and Si powders were used as raw materials, which could be in situ transferred to Al-Si alloy inside the capsule during the sintering formation process. With the powders as the raw materials, the final capsules obtained after sintering could provide a buffer cavity inside the capsules, which could accommodate the volumetric expansion of the PCMs during melting, thereby mitigating the potential leakage and rupture of the capsules. Investigations into the melting-solidification cycles revealed the remarkable durability of the Al-Si phase change capsules. Isostatic pressure treatment decreased internal ineffective cavities, improving the heat storage density of the capsules. The Al-12Si(Ar)-200 MPa capsule exhibited superior thermal storage performance, enduring up to 1300 cycles. The Al-12Si core had a melting enthalpy of 479 J/g, while the thermal storage density of the phase change capsule within the temperature range of 500 °C–700 °C reached 496 J/g. The results underscore the significant potential of macroencapsulated Al-Si PCM, positioning it as a promising candidate for high-temperature thermal storage applications.

Comparison of Structure and Phase Change Characteristic of Microencapsulated Core/shell Al–Si Alloy Microparticles Synthesized by Two Methods

Inorganic microencapsulated core/shell structure of Al-Si alloy micro-particles with silane coupling agent

Structural and phase change characteristics of inorganic microencapsulated core/shell Al–Si/Al2O3 micro-particles during thermal cycling

Research on the modification of microencapsulated phase change material for thermal energy storage by nano-SiO2 and graphite

Synthesis and thermal properties of phase-change microcapsules incorporated with nano alumina particles in the shell

Phase‐change composites silicone rubber/paraffin@ SiO 2 microcapsules with different core/shell ratio for thermal management

Preparation and properties of phase change thermal energy storage microcapsules modified with nano-SiO2

Al–Si @ Al2O3 @ mullite microcapsules for thermal energy storage: Preparation and thermal properties

High thermal storage capacity phase change microcapsules for heat transfer enhancement through hydroxylated-silanized nano-silicon carbide

Macroencapsulated Al-Si phase change materials for high temperature latent thermal energy storage

Systematic investigation on preparation and characterization of silica shell microencapsulated phase change materials based on sodium silicate precursor

Development of a novel Al-Si microcapsules with heat-resistant, high latent heat, and efficient solar heat absorption

Degradation mechanism of cyclic heat storage properties of Al-Si @Al2O3 microcapsules

Dodecane/Silica Phase Change Microcapsules: Fabrication, Structure and Stability

Synthesis and properties of phase change microcapsule with SiO2-TiO2 hybrid shell

Novel Na2SO4@SiO2 Phase Change Material with Core-Shell Structures for High Temperature Thermal Storage

Preparation and Characterization of Novel MicroPCMs (microencapsulated Phase-Change Materials) with Hybrid Shells Via the Polymerization of Two Alkoxy Silanes

Phase separation and formation of core-type microstructure of Al–65.5 mass% Bi immiscible alloys

Synthesis and Characterization of In Situ Dendritic/Particulate α-Al(Fe,TM)Si Phase Reinforced Al Matrix Composites

Preparation and characterization of a heat storage ceramic with Al-12 wt% Si as the phase change material

Study on the densification of composite coating particles of α-Al2O3–SiO2