Degradation mechanism of cyclic heat storage properties of Al-Si @Al2O3 microcapsules

Jixiang Zhang,Meijie Zhang,Haifeng Li,Huazhi Gu,Ding Chen,Wenjie Yuan,Peizhong Yan,Guoqun Li

DOI: https://doi.org/10.1016/j.ceramint.2022.12.239

IF: 5.532

2023-05-01

Ceramics International

Abstract:Two types of microcapsules, namely, Al-10Si@Al2O3 and Al-12Si@Al2O3, were prepared by pressure steam corrosion combined with heat treatment. The alloy raw materials of Al-10Si and Al-12Si, microcapsule precursors Al-10Si@AlOOH and Al-12Si@AlOOH, and microcapsules Al-10Si@Al2O3 and Al-12Si@Al2O3 were characterized by X-ray powder diffraction, scanning electron microscopy, and energy dispersive spectroscopy. The latent heat and microstructures of the two microcapsules following thermal cycles in an air atmosphere were investigated. The physical models of the microcapsules with and without primary Si precipitation were established, and their thermal-stress distributions were numerically simulated. Results showed that the latent heat of the two microcapsules decreased with an increase in the number of thermal cycles. The cyclic thermal performance degradation mechanism of Al-10Si@Al2O3 and Al-12Si@Al2O3 was as follows: Al consumption formed the shell layer and Al oxidation moved the alloy composition points toward the 100 wt%Si point on the Al-Si binary phase diagram. The precipitation of primary Si led to shell fragmentation due to alternating stress, and the exposed Al was further oxidized, thus reducing the cyclic heat storage performance of the microcapsules. This study provides guidelines for maintaining the latent heat stability of Al-Si alloy microcapsules following thermal cycling in an air atmosphere.

materials science, ceramics