Abstract:In the present work, two processing routes (A and B) with 3 CEE-AEC passes are performed on Mg–13Gd–4Y–2Zn–0.4Zr alloys, and the resultant microstructure evolution, texture analysis and mechanical properties are investigated systematically. The core difference between the two processing routes is the orientation between the expansion and extrusion steps, i.e., they are parallel to each other for on route A and perpendicular to each other for route B. The results show that a remarkable grain refinement is achieved via both processing routes due to dynamic recrystallization (DRX). Fine equiaxed grains are observed in the samples processed with route B with a final size of 3.6 ± 0.4 µm compared to the grain size of 4.5 ± 0.5 µm with route A. With an increasing number of CEE-AEC passes, the overall texture intensity decreases, and the basal texture gradually changes to the mixed texture components. The shear deformation introduced by the asymmetrical extrusion cavity promotes a broad angular distribution of the basal planes on routes A and B, leading to an obvious increase in the Schmid factor for the activation of the basal 〈a〉 slip system. The tensile test at ambient temperature reveals that the comprehensive mechanical properties are improved, and the conventional mechanical anisotropy of as-received alloys is alleviated by successive CEE-AEC processing, which is mainly derived from the competitive balance relation between the grain refinement and texture modification.

Microstructural Evolution and Mechanical Properties of Mg95.5Y3Zn1.5 Alloy Processed by Extrusion and ECAP

Microstructure Evolution and Properties of Mg-9Gd-0.8Al Alloy with Lamellar Phase During Extrusion at Different Temperatures

Ductility enhancement in Mg–8.7Gd–4.18Y–0.42Zr magnesium alloy fabricated through extrusion and equal channel angular pressing (EX-ECAP)

Study on the Effect of the ECAP Deformation on the Organization and Properties of the Extruded Mg-Sn-Al Alloys

Effect of rotational-die ECAP parameters on microstructure and mechanical properties of Mg97Y2Zn alloys

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

Microstructure evolution, texture and mechanical properties of a Mg–Gd–Y–Zn–Zr alloy fabricated by cyclic expansion extrusion with an asymmetrical extrusion cavity: The influence of passes and processing route

Effects of Zn Addition on Microstructural Evolution, Mechanical Properties and Corrosion Resistance of Al-6Mg Alloy Subjected to ECAP Processing at 200 ℃

Microstructure and mechanical properties of Mg-Gd-Zn-Zr alloy after hot extrusion

Influence of Processing Routes to Enhance the Mechanical Properties of Mg–6Zn–1Y–3.5CeMM (wt.%) Alloy

Precipitation behaviors and mechanical properties of a solution-treated Mg-Gd-Nd-Zn-Zr alloy during equal-channel angular pressing process

Microstructure Evolution and Mechanical Properties of AZ80 Mg Alloy during Annular Channel Angular Extrusion Process and Heat Treatment

Microstructural Evolution and Mechanical Properties of Mg-5y-5gd-Xnd-0.5zr Magnesium Alloys at Different States

Microstructure and Mechanical Properties of Extruded Mg-Zn-Nd-Y-Zr-Ca Alloy

Optimization of Microstructure and Mechanical Property of a Mg-Zn-Y-Nd Alloy by Extrusion Process

Microstructural evolution and mechanical response of duplex Mg-Li alloy containing particles during ECAP processing

Evading Strength-Ductility Tradeoff in Mg Alloy via Uniform Microstructure and Unique Texture Modification Induced by Moderate Temperature ECAP

Effects of extrusion process on microstructure, precipitates and mechanical properties of Mg-Gd-Y-Zr-Ag alloys

Effect of Artificial Cooling Extrusion on Microstructure and Mechanical Properties of Mg–Zn–Y Alloys

Microstructure and mechanical properties synergistically enhanced via heat treatment modification of the as-extruded Mg-1.5Al-0.5Zn-0.2Y-0.2Ca alloy

Mechanical Properties and Microstructure of AZ31B Magnesium Alloy Processed by I-ECAP