Abstract:Abstract This work was undertaken to investigate the feasibility of using near infrared spectroscopy (NIR) and partial least squares regression (PLS) as a tool to characterize the basic wood properties of Norway Spruce (Picea abies (L.) Karst.). The wood samples originated from a trial located in the province of Västerbotten in Sweden. In this trial, the effects of birch shelterwoods (Betula pendula Roth) of different densities on growth and yield in Norway spruce understorey were examined. All Norway spruce trees in each shelterwood treatment were divided into three growth rate classes based on diameter at breast height (1.3 m) over bark. Five discs were cut from each tree (i.e. from the root stem, and at 20%, 40%, 60%, and 80% of the total height). The discs from 40% tree height were used (i.e., where the largest variations in annual ring widths and wood density were found). A total of 27 discs were selected. The discs were used for measuring annual ring widths, wood density, average fiber length and the fiber length distributions. Milled wood samples prepared from the discs were used for recording NIR spectra. PLS regression was used to generate prediction models for the wood properties (Y-matrix) and NIR spectra (X-matrix) as well as between the wood properties (Y-matrix) and the fiber length distributions (X-matrix). One set of models was generated using untreated spectra and fiber length distributions. For a second set of models the structure in the X-matrix, which was orthogonal to the matrix described by the wood properties, was eliminated using a soft target rotation technique called orthogonal signal correction (OSC). The PLS model obtained using “raw” untreated NIR spectra and fiber length distributions had a poor modeling power as evidenced by the cumulative Q2 values. For the PLS models based on untreated NIR spectra the cumulative Q2 values ranged from a minimum of 16% (wood density) to a maximum of 46% (no. of annual rings). Orthogonal signal correction of the X-matrix (NIR spectra or fiber length distributions) gave PLS models with a modeling power corresponding to cumulative Q2 values well in excess of 70%. The improvement in predictive ability accomplished by the OSC procedure was verified by placing four of the 27 observations in an external test set and comparing RMSEP values for the test set observations without OSC and with OSC.

Estimation of Crystallinity of Poplar Cellulose Using Near Infrared Spectroscopy

Rapid Determination of Componential Contents and Calorific Value of Selected Agricultural Biomass Feedstocks Using Spectroscopic Technology

Determination of Hemicellulose, Cellulose and Lignin Content Using Visible and Near Infrared Spectroscopy in Miscanthus Sinensis.

Application of Near Infrared Spectroscopy for Rapid Determination the Geographical Regions and Polysaccharides Contents of Lentinula Edodes.

Prediction of holocellulose and lignin content of pulp wood feedstock using near infrared spectroscopy and variable selection

Use of Visible and Near Infrared Spectroscopy to Predict Klason Lignin Content of Bamboo, Chinese Fir, Paulownia, and Poplar

Rapid prediction of acid detergent fiber, neutral detergent fiber, and acid detergent lignin of rice materials by near-infrared spectroscopy.

Rapid characterization of woody biomass digestibility and chemical composition using near-infrared spectroscopy

Novel strategy for establishment of an FT-Raman spectroscopy based quantitative model for poplar holocellulose content determination

Determination of Hemicellulose, Cellulose and Lignin in Moso Bamboo by Near Infrared Spectroscopy

A model transfer strategy based on screening stable wavelength for quantitative analysis of holocellulose and lignin content distribution in pulpwood

Predictive Modeling of Lignin Content for the Screening of Suitable Poplar Genotypes Based on Fourier Transform–Raman Spectrometry

Machine learning algorithms for rapid estimation of holocellulose content of poplar clones based on Raman spectroscopy

Machine learning prediction of lignin content in poplar with Raman spectroscopy

Prediction of basic wood properties for Norway spruce. Interpretation of Near Infrared Spectroscopy data using partial least squares regression

Rapid Analysis of Purification Process of Grape Seed Extracts Using Near Infrared Spectroscopy

The Near Infrared Spectral Bands Optimal Selection in the Application of Liquor Fermented Grains Composition Analysis]

Application Of Visible And Near Infrared Spectroscopy For Rapid Analysis Of Chrysin And Galangin In Chinese Propolis

Near-infrared Lignin Model Transfer: A Study Based on SWCSS-CARS Coupling Algorithm

Multivariate Modeling Dahurian Larch Plantation Wood Density Based on Near Infrared Spectroscopy

[The analysis of wood microfibril angle by near infrared spectroscopy and X-ray diffractometry].