Abstract:Advances in Mechanical Engineering, Volume 16, Issue 5, May 2024. Carbon fiber reinforced cement-based composite material (CFRC) is a novel type of composite material that involves the incorporation of carbon fibers into ordinary concrete. This addition effectively enhances the tensile strength, deformation performance, and dynamic load resistance of reinforced concrete structures. Consequently, CFRC has found increasing applications in the construction industry. The objective of this research is to investigate the wear mechanisms of diamond tools during the sawing process of CFRC and offer guidance on cost reduction through the optimization of processing parameters. The wear analysis of diamond segments can be divided into two categories: matrix wear and diamond particle wear. The diamond particles can exist in different states, and the formation of voids resulting from the detachment of diamond particles is considered as a reference point. The analysis reveals that abrasive wear is the main mechanisms of matrix wear in CFRC sawing. The wear resistance is strongly influenced by the proportion of diamond particles in favorable states, which is determined by the applied loads and operating parameters. The proportion of diamond particles exhibits a clear variation with adjustments made to the feeding speed. Notably, an increase in feeding rate results in a significant decrease in the percentage of blunt particles, reducing it from 28% to 6%. To achieve a lower wear rate, a predictive model was established using Design Expert software based on the experimental results. The model demonstrated that a wear rate as low as 268.5 mm/m2 can be achieved with a flywheel speed of 78 r/min and a feeding speed of 90 mm/h. The optimization process, aimed at minimizing wear rate, was successfully carried out without compromising productivity.

Tool Wear Properties of Diamond-Cutting Ferrous Metal

A critical review on the chemical wear and wear suppression of diamond tools in diamond cutting of ferrous metals

Wear Behaviors of Pcd Tools in Turning Granite

CVD Diamond Interaction with Fe at Elevated Temperatures

Effect of Components on Mechanical Properties of Fe-matrix Bonding Diamond Tool

Diamond Tool Wear Reduction by Combining Ultrasonic Elliptical Vibration with Graphite Particle Atmosphere

A review of tool wear mechanism and suppression method in diamond turning of ferrous materials

Tool Wear in Ultra-Precision Diamond Cutting of Non-Ferrous Metals with a Round-Nose Tool

Study on tool wear mechanism of single-crystal diamond in ultrasonic vibration elliptical cutting of tungsten heavy alloy

Wear mechanism of diamond-cutting tool in nano-cutting polycrystalline γ-TiAl alloy based on molecular dynamics simulation

Ultrasonic Vibration Cutting of Stainless Steel with Polycrystalline Diamond Tools

Cutting performance and wear mechanism of multilayer diamond coated tools

A Locally Boron-Doped Diamond Tool for Self-Sensing of Cutting Temperature: Lower Thermal Capacity and Broader Applications

Suppression mechanism of diamond tool wear by graphene nanofluid in micro-milling of TC4 alloy: A study combining experimental and molecular dynamics

The Study of the Influence of Tool Wear on Cutting Temperature in Diamond Ultra-Precision Cutting of Aluminum Alloy Mirror

Inhibition effect of covalent carbon nanosheets on mechanochemical wear of diamond

Adhesion and friction behaviors of a γ-Fe/diamond heterogeneous contact interface: a density functional theory study

Analysis of Tool Wear in GH4169 Material Milling Process

Fabrication and evaluation of high-entropy alloy reinforced Fe bond diamond tool

Mechanical and cutting performance of cemented carbide tools with Cr/x/DLC composite coatings

Wear mechanisms of diamond segmenta in cutting of carbon fiber reinforced cement-based composite and optimizing in parameters