Abstract:The effects and mechanisms of using ultrasonic vibration assistance (U.V.-assisted machining) combined with straight-nosed cutting tools on reducing the cutting tool wear in single-point diamond turning (SPDT) of Zerodur glass-ceramic are analysed and experimentally investigated. Aiming at the predominant abrasive wear in machining hard and brittle materials, analyses have shown that applying appropriate ultrasonic vibration to the cutting tool can induce considerable inertial acceleration to the wear particles residing on the tool-work interface for promoting their ejection from the contact area to reduce the abrasion. Meanwhile, the high thermal conductivity of diamond can prevent the possible excessive temperature elevation of the cutting tool surface that may result from the in-plane vibration components. To verify these, a longitudinal ultrasonic vibrator that works together with the Poisson's effect was designed for the SPDT processes with straight-nosed cutting tools. Machining tests on Zerodur optics have shown that the assistant ultrasonic vibration is able to decrease the tool flank wearland width by about 30 %, and the groove-like scratches on the tool flank wearland surface were reduced, which is consistent with the analytical deductions. Besides, no significant traces of structural change, element diffusion, and oxidation were found on the worn cutting tool surfaces under either the assisted or unassisted cutting conditions. The experiments have also shown that the enhanced durability of cutting tools has extended the cutting tool life for maintaining good machined surface quality, which is particularly beneficial to the ultra-precision machining of large-size optical parts.

Ultrasonic Vibration Cutting of Stainless Steel with Polycrystalline Diamond Tools

Effect of ultrasonic on properties of electroplated diamond tools

Effect of ultrasonic on coating performances of electroplated diamond tools

Vibration-Assisted Precision Machining of Steel with Pcd Tools

Suppression of diamond tool wear with sub-millisecond oxidation in ultrasonic vibration cutting of steel

Study on tool wear mechanism of single-crystal diamond in ultrasonic vibration elliptical cutting of tungsten heavy alloy

Ultrasonic Vibration-Assisted Cutting of AISI 420 Mod Steel by Using CVD Thick-Film Diamond Tool

A critical review on the chemical wear and wear suppression of diamond tools in diamond cutting of ferrous metals

Diamond Tool Wear Reduction by Combining Ultrasonic Elliptical Vibration with Graphite Particle Atmosphere

Reducing the cutting tool wear in diamond turning of Zerodur glass-ceramic by the mechanical cleaning effect of ultrasonic vibration assistance

Experiment and Discussion on Ultrasonic Vibration-Assisted Single Point Diamond Turning of Die Steels

A review of tool wear mechanism and suppression method in diamond turning of ferrous materials

Ultrasonic Elliptical Vibration Texturing of the Rake Face of Carbide Cutting Tools for Adhesion Reduction

Cutting performance and wear mechanism of multilayer diamond coated tools

Tool Wear in Ultra-Precision Diamond Cutting of Non-Ferrous Metals with a Round-Nose Tool

Theoretical and experimental investigations of tool wear in ultrasonic vibration–assisted turning of 304 austenitic stainless steel

Influence of Vibration Inclination on Surface Quality and Tool Wear by Ultra-Precision Vibration-Assisted Cutting

An Investigation of Cutting Performance and Action Mechanism in Ultrasonic Vibration-Assisted Milling of Ti6Al4V Using a PCD Tool

Cryogenic assisted femtosecond laser ablation of polycrystalline diamond

Study on Cutting Force and Tool Wear in Machining of Die Materials with Textured PCD Tools Under Ultrasonic Elliptical Vibration

Study on Electrical Discharge and Ultrasonic-Assisted Mechanical Combined Machining of Polycrystalline Diamond