Abstract:This paper deals with the initial shape analysis, cutting-pattern analysis, surface accuracy measurement and modal testing of high-precision inflatable antennas reflectors that are intended for spaceflight applications. The initial shape analysis method, formulated on the basis of membrane theory and elastic mechanics, determines the required as-manufactured shape of the reflective surface of the antenna reflector. On the other hand, the cutting-pattern analysis method, with its formulation based on spring-mass representations, numerically calculates the required cutting pattern of the planar membrane gores that are to be assembled to form the 3-dimensional reflective surface. To validate the effectiveness of the proposed analysis methods, a 3.2-m antenna reflector model was designed, manufactured, and assembled for ground demonstration and testing. The reflective surface accuracy of this demonstration reflector model was measured by a photogrammetric measuring system. Shape adjustments of the reflective surface were performed by systematically adjusting the tension in the cables that were used to mount the reflector to its support structure. It was found that the reflective surface accuracy of the reflector model, as defined by its RMS error from a best-fit parabolic shape, was less than 1mm. In addition, dynamic and RF tests were also performed on the demonstration reflector model. The test results indicated that the first-mode frequency of the reflector model agreed well with the corresponding analytical prediction, and its radiation pattern was also well focused.

Placement Optimization of Smart Piezoelectric Rods for Shape Control of Large Cable-Network Antenna Structures

Optimal Design and Analysis of Deployable Antenna Truss Structure Based on Dynamic Characteristics Restraints

The Application of Shape Memory Polymer Composite in Space Deployable Truss Structure

OPTIMAL PLACEMENT OF PIEZOELECTRIC TORSIONAL ACTUATOR/SENSOR BASED ON SMART BAR

Deployment motion control research of deployable truss antenna

Structural optimization and model fabrication of a double-ring deployable antenna truss

Optimal placement of piezoelectric torsional actuator based on genetic algorithm

Non-Linear Displacement Control of Prestressed Cable Structures

Design and Deploying Study of a New Petal-Type Deployable Solid Surface Antenna

Structural Design and Static Analysis of a Double-Ring Deployable Truss for Mesh Antennas

Structure design and mechanical measurement of inflatable antenna

Kinematic analysis of deployable toroidal spatial truss structures for large mesh antenna

Development and experimental verification of the adaptive cable-strut antenna array

Optimal Distribution Of Actuator/Sensor In Piezothermoelectric Intelligent Structure

Gain-Based Feedback for Shape Control of Antenna Reflectors Using Deep Q-Network Algorithm

Development and experimental verification of an adaptive structure for phased antenna array using SMA bunch

Precision Placement Analysis of a New Multi-DOF Piezoelectric End-Effector via Finite Elements

Design and Analysis of a Precision Multi-DOF Placement Device

An Incremental Algorithm for Static Shape Control of Smart Structures with Nonlinear Piezoelectric Actuators

Actuator Placement Optimization For Piezothermoelectric Biotic Thermal Robust Structure

Shape and Displacement Control of Beams With Various Boundary Conditions Via Photostrictive Optical Actuators