Abstract:Electrostrictive materials, hard ceramics and soft polymers, have been used as precision actuators in many engineering applications. This study is to examine bang–bang control performance of a hybrid Plexiglas beam laminated with polymeric electrostrictive (RTV 270) actuator and piezoelectric polyvinylidene fluoride (PVDF) sensor layers using both analytical and experimental techniques. Material characteristics are calibrated via static testing first; a hybrid beam model is then fabricated and an experiment set-up, consisting of a bang–bang controller, high-voltage amplifier, data acquisition system and the hybrid beam system, is designed to evaluate vibration control characteristics (i.e., damping ratio estimation) of the hybrid beam subjected to various control conditions. Due to the quadratic behaviour of electrostrictive materials, the controller activates the electrostrictive actuator only in upward motion of the beam, with reference to signals generated from the piezoelectric sensor. Base on constitutive equations and dynamic/control characteristics, a mathematic hybrid beam model is also derived from the electrostrictive thin shell theory and its dynamic responses, based on the finite difference discretization, are simulated to predict damping ratios resulting from control forces induced by the electrostrictive actuators. Dynamic responses (with and without control) of the physical beam model are measured and compared with simulation results. Favourable comparison suggests that the mathematical model describes the experimental model very well and its application to other advanced structures can be proceeded.

Shape and Displacement Control of Beams With Various Boundary Conditions Via Photostrictive Optical Actuators

Photostriction and Its Use in Actuation of Flexible Structures

Analysis of Actuation Authorities Induced by Photostrictive Actuators on a Curved Beam

Independent Modal Control Of Beams With Spatially Distributed Orthogonal Photostrictive Actuators

Photostrictive Actuators for Photonic Control of Shallow Spherical Shells

A New Class of Distributed Photostrictive Orthogonal Actuators in Smart Curved Structures

Research on simultaneous control of force and shape for adaptive cable-strut tensile structures

Photonic Control Of Plates Laminated With Multi-Dof Photostrictive Actuators

A New Multi-DOF Photostrictive Actuator for Dynamic Control of Shells: Modeling and Analysis

Wireless Active Vibration Control of Thin Cylindrical Shells Laminated with Photostrictive Actuators

Micro-Photodeformation Actions of Photostrictive Actuator Patches Applied to Vibration Control of Cylindrical Shells

Structural vibration control using spatially configured opto-electromechanical actuators

Wireless Actuation Characteristics and Modal Control Effectiveness of Segmented Photostrictive Actuators

Distributed Shell Control with A New Multi-Dof Photostrictive Actuator Design

Opto-Piezothermoelastic Constitutive Modeling of a New 2-D Photostrictive Composite Plate Actuator

Nonlinear Opto-Electromechanics and Photodeformation of Optical Actuators

Parametric Studies of Photo Deformation and Optical Actuation

A Hybrid Photovoltaic/flexoelectric Actuation Mechanism Applied to Precision Actuation and Vibration Control of Beams

Multiflexoelectric Actuation and Control of Beams

Design and testing of a hybrid polymeric electrostrictive/piezoelectric beam with bang–bang control

Static Nano-Control Of Cantilever Beams Using The Inverse Flexoelectric Effect