Abstract:The technique of laser-generated and laser-detected Lamb waves is a powerful tool for characterizing elastic property of plates. However, the transient waveforms depend strongly on the longitudinal acoustic wavelength L and the plate thickness H. For a thick plate (bulk material), L/H≪1, a typical waveform consists of arrivals of longitudinal, shear, and surface wave pulses, if a detecting position is localized at the same side as the exciting laser beam. For a very thin plate L/H≫1, the transient waveform is characterized by the lowest Lamb wave modes, i.e., the first arrival of the spike signal from the lowest symmetric mode, and higher frequencies and the later lower frequency signal of the lowest antisymmetric mode. However, for thicker plates (H∼2.0 mm), the transient waveforms excited by a laser pulse are much more complicated, because of contributions of the higher-order Lamb wave modes, due to lower cut-off frequency. Thus, it is necessary to clarify theoretically dynamic response of the thicker composite plates for analyzing anisotropic behavior and extracting elastic constants of composite plates by fitting comparison of theory with experimental waveforms. In this paper, the theoretical and experimental studies are presented for a titanium graphite composite plate with thickness 1.44 mm, which can be modeled as transversely isotropic. The ultrasonic Lamb waves are excited by a laser pulse with an approximate duration of 10 nsec and energy of 5.7 mJ. The normal surface velocity of the ultrasonic Lamb waves are detected by a Michelson interferometer in fiber and cross fiber propagating directions for different propagating distances away from the excited laser to investigate the anisotropic property of the composite material and propagation characteristics of the ultrasonic Lamb waves. The results show that the detected waveforms consist of several Lamb wave modes and the theoretical calculations are in agreement with experiments.

Numerical Simulation of Lamb Wave Propagation in Isotropic Materials with Different Plate Thicknesses

Experiment Investigations of Lamb Waves in an Aluminum Plate

Propagating, Evanescent and ZGV Lamb Modes in High-Performance Anisotropic Cu–Al–Ni Alloy Plates

Asymmetric Lamb Wave Propagation and Mode Isolation in Thin Plate With Spatiotemporal Periodic Stiffness

Numerical Simulation for Dispersion Characteristics of Lamb Wave Propagation in Composite Laminates with Anti-Symmetric Surface Excitation

Effective Time-Frequency Characterization of Lamb Wave Dispersion in Plate-Like Structures with Non-Reflecting Boundaries

Lamb Wave Scattering by A Pair of Surface-Breaking Inclined Cracks in A Plate

Semi-analytical finite element analysis of Lamb wave dispersion curves

Lamb Wave Characteristic Analysis of Anisotropic Multilayer Composite UsingFinite Element Intrinsic Frequency Method

Numerical Analysis of the Main Wave Propagation Characteristics in a Steel-CFRP Laminate Including Model Order Reduction

Numerical and experimental investigation of guided ultrasonic wave propagation in non-uniform plates with structural phase variations

Thermoelastic Excitation of Transient Lamb Wave in an Orthotropic Thin Plate

LAMB WAVES PROPAGATION ALONG NON-PRINCIPAL DIRECTIONS IN ORTHOTROPIC PLATE

Multi-parameter Numerical Simulation of Lamb Waves Induced by Laser in Aluminium Plates

Modeling of the Lamb Wave Asymmetric Modes with an Improved Two-Dimensional Thin Plate Theory

Lamb Waves Propagation Characteristics in Functionally Graded Sandwich Plates

Laser-Generated Lamb Waves Inside an Aluminum Plate: Comparison Between Theory and Experiment

Experimental and Theoretical Analyses on Laser-Generated Transient Lamb Waves in an Orthotropic Plate

Numerical Simulation of Laser-Generated Lamb Wave by Finite Element Method in Thin Transversely Isotropic Laminate Composite

Multiple crossing points of Lamb wave propagating in a magneto-electro-elastic composite plate

The Dispersion Curves and Wave Structures of Lamb Waves in Functionally Graded Plate: Theoretical and Simulation Analysis